Catalogs > Industrial Controls Catalog > Motor Control, IEC > Contactors > Bulletin 100-C Contactors
Bulletin 100-C Contactors
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Assignment of Contacts | |
Bulletin 100-C/104-C Accessories | |
| Bulletin 100/104-K, 100/104-C, 100/104-D, 100S/104S-C, 100S-D Specifications | |
Bulletin 100-C/104-C Life-Load Curves | |
Bulletin 100-C/104-C Approximate Dimensions | |
Renewal Parts | |
Bulletin 100-C Contactors and Accessories
Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes.
|
Mounting Position
|
|
AC Contactors and DC Contactors with 12V or 24V Electronic Coils
| Cat. No. | a | b | c | c1 | c2 | Æd | d1 | d2 |
| 100-C09…100-C23 | 45 (1-25/32) | 81 (3-3/16) | 80.5 (3-11/64) | 75.5 (2-31/32) | 6 (15/64) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C30, 100-C37 | 45 (1-25/32) | 81 (3-3/16) | 97.5 (4) | 92.5 (3-41/64) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C40 | 59 (2-21/64) | 81 (3-3/16) | 100.5 (3-61/64) | 95.5 (3-49/64) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 45 (1-25/32) |
| 100-C43 | 54 (2-1/8) | 81 (3-3/16) | 100.5 (3-61/64) | 95.5 (3-49/64) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 45 (1-25/32) |
| 100-C60…100-C97 | 72 (2-53/64) | 122 (4-51/64) | 117 (4-39/64) | 111.5 (4-25/64) | 8.5 (21/64) | 4 - 5.4 (4 - 7/32) | 100 (3-15/16) | 55 (2-11/64) |
| 100-C90 | 95 (3-47/64) | 122 (4-51/64) | 117 (4-39/64) | 111.5 (4-25/64) | 8.5 (21/64) | 4 - 5.4 (4 - 7/32) | 100 (3-15/16) | 55 (2-11/64) |
DC Contactors with Conventional Coils
| Cat. No. | a | b | c | c1 | c2 | Æd | d1 | d2 |
| 100-C09Z…100-C16Z | 45 (1-25/32) | 81 (3-3/16) | 106.5 (4-3/16) | 101.5 (4) | 6 (15/64) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C23Z | 45 (1-25/32) | 81 (3-3/16) | 123.5 (4-55/64) | 119 (4-43/64) | 6 (15/64) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C30Z…100-C37Z | 45 (1-25/32) | 81 (3-3/16) | 141.5 (5-37/64) | 136.5 (5-3/8) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C40Z | 59 (2-21/64) | 81 (3-3/16) | 144.5 (5-11/16) | 139.5 (5-1/2) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 45 (1-25/32) |
| 100-C43Z | 54 (2-1/8) | 81 (3-3/16) | 144.5 (5-11/16) | 139.5 (5-1/2) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 45 (1-25/32) |
| 100-C60D…100-C97D | 72 (2-53/64) | 122 (4-51/64) | 117 (4-39/64) | 111.5 (4-25/64) | 8.5 (21/64) | 4 - 5.4 (4 -7/32) | 100 (3-15/16) | 55 (2-11/64) |
| 100-C90D | 95 (3-47/64) | 81 (3-3/16) | 117 (4-39/64) | 111.5 (4-25/64) | 8.5 (21/64) | 4 - 5.4 (4 - 7/32) | 100 (3-15/16) | 55 (2-11/64) |
DC Contactors with 110V or 220V DC Electronic Coils
| Cat. No. | a | b | c | c1 | c2 | Æd | d1 | d2 |
| 100-C09E…100-C23E | 45 (1-25/32) | 105 (4-1/8) | 80.5 (3-11/64) | 75.5 (2-31/32) | 6 (15/64) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C30E…100-C37E | 45 (1-25/32) | 105 (4-1/8) | 97.5 (4) | 92.5 (3-41/64) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 35 (1-3/8) |
| 100-C40EA…100-C40ED | 59 (2-21/64) | 105 (4-1/8) | 100.5 (3-61/64) | 95.5 (3-49/64) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 45 (1-25/32) |
| 100-C43EA…100-C43ED | 54 (2-1/8) | 105 (4-1/8) | 100.5 (3-61/64) | 95.5 (3-49/64) | 6.5 (1/4) | 2 - 4.5 (2 -3/16) | 60 (2-23/64) | 45 (1-25/32) |
Accessories
| Contactors with | mm | (inches) | |
| Auxiliary contact block for front mounting | 2- or 4-pole | c/c1 + 39 | (c/c1 + 1-37/64) |
| Auxiliary contact block for side mounting | 1- or 2-pole | a + 9 | (a + 23/64) |
| Pneumatic Timing Module | c/c1 + 58 | (c/c1 + 2-23/64) | |
| Electronic Timing Module | on coil terminal side | b + 24 | (b + 15/16) |
| Mechanical Interlock | on side of contactor | a + 9 | (a + 23/64) |
| Mechanical Latch | c/c1 + 61 | (c/c1 + 2-31/64) | |
| Interface Module | on coil terminal side | b + 9 | (b + 23/64) |
| Surge Suppressor | on coil terminal side | b + 3 | (b + 1/8) |
| Labeling with ⋆ | label sheet | + 0 | (+ 0) |
| marking tag sheet with clear cover | + 0 | (+ 0) | |
| marking tag adapter for System V4 / V5 | + 5.5 | (+ 7/32) | |
| marking tag adapter for System Bul. 1492W | + 5.5 | (+ 7/32) | |
| Terminal Lug Kit | 100-C09…C23 | b + 53 | (b + 2-3/32) |
| 100-C30…37 | b + 44 | (b + 1-47/64) | |
| 100-C43 | b + 52 | (b+ 2-3/64) | |
| 100-C60…C97 | b + 99 | (b + 3-7/8) | |
| Paralleling Links | 100-C09…C23 | b + 78 | (b + 3-1/16) |
| c + 9/5 | (c + 3/8) | ||
| 100-C30…C37 | b + 85 | (b + 3-11/32) | |