Catalogs > Industrial Controls Catalog > Motor Control, IEC > Contactors > Bulletin 100-D IEC Contactors

Bulletin 100-D IEC Contactors

Introduction

Standards Compliance and Certifications

Product Selection

Bulletin 100-D/104-D Accessories

Bulletin 100/104-K, 100/104-C, 100/104-D, 100S/104S-C, 100S-D Specifications

Bulletin 100-D/104-D Life-Load Curves

Bulletin 100-D Approximate Dimensions

Renewal Parts

Product Selection

3-Pole AC-Operated Contactors

Conventional and Electronic AC Coils
3 Main Contacts
Non-Reversing or Reversing

I_e [A]	I_e [A]	Switching of 3-phase motors — AC-2, AC-3										Auxiliary contacts		Non-Reversing Contactor Cat. No.	Reversing Contactor Cat. No.
60 °C	40 °C	kW (50 Hz)						Hp (60 Hz)				N.O.	N.C.
AC-3	AC-1	230V	400V	415V	500V	690V	1000V	200V	230V	460V	575V
95	160	30	50	55	63	90	45	25	30	60	75	0	0	100-D95Ä00	—
												1	1	100-D95Ä11	—
												2	4	—	104-D95Ä24
110	160	32	55	63	75	100	55	40	40	75	100	0	0	100-D110Ä00	—
												1	1	100-D110Ä11	—
												2	4	—	104-D110Ä24
140	250	45	75	80	80	110	75	40	50	100	125	0	0	100-D140Ä00	—
												1	1	100-D140Ä11	—
												2	4	—	104-D140Ä24
180	250	55	90	100	90	132	90	50	60	150	150	0	0	100-D180Ä00	—
												1	1	100-D180Ä11	—
												2	4	—	104-D180Ä24
210	350	63	110	125	150	200	110	60	75	150	200	0	0	100-D210Ä00	—
												1	1	100-D210Ä11	—
												2	4	—	104-D210Ä24
250	350	80	132	150	160	250	132	75	100	200	250	0	0	100-D250Ä00	—
												1	1	100-D250Ä11	—
												2	4	—	104-D250Ä24
300	450	90	160	160	200	300	160	100	125	250	300	0	0	100-D300Ä00	—
												1	1	100-D300Ä11	—
												2	4	—	104-D300Ä24
420	540	132	220	250	300	425	220	150	175	350	400	0	0	100-D420Ä00	—
												1	1	100-D420Ä11	—
												2	4	—	104-D420Ä24
630	800	200	355	355	450	500	—	200	250	500	600	0	0	100-D630Ä00	—
												1	1	100-D630Ä11	—
												2	4	—	104-D630Ä24
860	1000	250	500	500	560	600	—	250	300	600	700	0	0	100-D860Ä00	—
												1	1	100-D860Ä11	—
												2	4	—	104-D860Ä24

Ä Coil Voltage Codes for AC Control

Conventional Coil	[V]	24	48	100	110	120	200	208	220…230	230	240	277	380…400	415	440	480	500	550	600
100-D95...100-D180	50 Hz	K	Y	—	D	—	—	—	A	—	T	—	N	B	G	—	M	C	—
100-D95...100-D180	60 Hz	J	X	—	—	D	—	H	—	—	A	T	—	—	N	B	—	—	C
100-D95…100-D110	50/60 Hz	—	—	KP	KN	—	KG	—	KL	KF	KA	KT	—	—	—	—	—	—	—

Electronic Coil
w/ EI. Interface §

[V]

42…64

100

110…130

200

208…277

200…220

230…250

277

380…415

380…500

440…480

500

100-D95...100-D300

50/60 Hz

EJ§

—

100-D420

50/60 Hz

—

100-D630…100-D860

50/60 Hz

—

§ Signal voltage of the Cat. No. 100-D… electronic interface: nominal U_e: 24V DC/I_e: 15 mA
Pickup voltage: 13.0V DC...30.2V DC
Dropout Voltage: –3.0V DC...+5.0V DC.
§ Not available with 100/104-D300.

3-Pole DC-Operated Contactors

Conventional and Electronic DC Coils
3 Main Contacts
Non-Reversing or Reversing

I_e [A]		Switching of 3-phase motors AC-2, AC-3										Auxiliary contacts		Non-Reversing Contactor Cat. No.	Reversing Contactor Cat. No.
60 °C	40 °C	kW (50 Hz)						Hp (60 Hz)				N.O.	N.C.
AC-3	AC-1	230V	400V	415V	500V	690V	1000V	200V	230V	460V	575V
95	160	30	50	55	63	90	45	25	30	60	75	0	0	100-D95Ä00	—
												1	1	100-D95Ä11	—
												2	1/1L	100-D95Ä22LT	—
												2	4	—	104-D95Ä24
												2	2/2L	—	104-D95Ä24LT
110	160	32	55	63	75	100	55	40	40	75	100	0	0	100-D110Ä00	—
												1	1	100-D110Ä11	—
												2	1/1L	100-D110Ä22LT	—
												2	4	—	104-D110Ä24
												2	2/2L	—	104-D110Ä24LT
140	250	45	75	80	80	110	75	40	50	100	125	0	0	100-D140Ä00	—
												1	1	100-D140Ä11	—
												2	1/1L	100-D140Ä22LT	—
												2	4	—	104-D140Ä24
												2	2/2L	—	104-D140Ä24LT
180	250	55	90	100	90	132	90	50	60	150	150	0	0	100-D180Ä00	—
												1	1	100-D180Ä11	—
												—	—	100-D180Ä22LT	—
												2	4	—	104-D180Ä24
												2	2/2L	—	104-D180Ä24LT
210	350	63	110	125	150	200	110	60	75	150	200	0	0	100-D210Ä00	—
												1	1	100-D210Ä11	—
												2	4	—	104-D210Ä24
250	350	80	132	150	160	250	132	75	100	200	250	0	0	100-D250Ä00	—
												1	1	100-D250Ä11	—
												2	4	—	104-D250Ä24
300	450	90	160	160	200	300	160	100	125	250	300	0	0	100-D300Ä00	—
												1	1	100-D300Ä11	—
												2	4	—	104-D300Ä24
420	540	132	220	250	300	425	220	150	175	350	400	0	0	100-D420Ä00	—
												1	1	100-D420Ä11	—
												2	4	—	104-D420Ä24
630	800	200	355	355	450	500	—	200	250	500	600	0	0	100-D630Ä00	—
												1	1	100-D630Ä11	—
												2	4	—	104-D630Ä24
860	1000	250	500	500	560	600	—	250	300	600	700	0	0	100-D860Ä00	—
												1	1	100-D630Ä11	—
												2	4	—	104-D860Ä24

Ä Coil Voltage Codes for DC Control

Conventional Coil	[V]	24	48	110	125	220
100-D95...100-D180T	DC	ZJ	ZY	ZD	ZS	ZA

Electronic Coil w/ EI Interface §	[V]	24	48…72	110…130	200…255
100-D95...100-D300	DC	EZJ	EZY	EZD	EZA
100-D420	DC	—	—	EZD	EZA
100-D630…100-D860	DC	—	—	ED	EA

T For conventional DC coils, the pickup winding must be interconnected with the N.C. late-breaking auxiliary contact(s).
§ Signal voltage of the Cat. No. 100-D… electronic interface: nominal U_e: 24V DC/I_e: 15 mA
Pickup voltage: 13.0V DC...30.2V DC , Dropout Voltage: –3.0V DC...+5.0V DC.

Auxiliary contacts with sequence numbering.

Cat. Nos. 100-D95…D420 — Electronic and Conventional AC Coils, Electronic DC Coils

Contact Configuration		Auxiliary contact configurations
		Left Side Mounting			Right Side Mounting
N.O.	N.C.	Outside Cat. No.	Inside Cat. No.	For Use With	Inside Cat. No.	Outside Cat. No.
8	0	100-DS2-20	100-DS1-20	100-D…00	100-DS1-20	100-DS2-20
Sequence starts with…		7/8	3/4	100-D…00	1/2	5/6
7	1	100-DS2-20	100-DS1-20	100-D…00	100-DS1-11	100-DS2-20
Sequence starts with…		7/8	3/4	100-D…00	1/2	5/6
6	2	100-DS2-20	100-DS1-11	100-D…00	100-DS1-11	100-DS2-20
Sequence starts with…		7/8	3/4	100-D…00	1/2	5/6
5	3	100-DS2-20	100-DS1-11	100-D…00	100-DS1-11	100-DS2-11
Sequence starts with…		7/8	3/4	100-D…00	1/2	5/6
4	4	100-DS2-11	100-DS1-11	100-D…00	100-DS1-11	100-DS2-11
Sequence starts with…		7/8	3/4	100-D…00	1/2	5/6

Cat. Nos. 100-D95…D420 — Electronic and Conventional AC Coils, Electronic DC coils

Contact Configuration		Auxiliary contact configurations
		Left Side Mounting			Right Side Mounting
N.O.	N.C.	Outside Cat. No.	Inside Cat. No.	For Use With	Inside Cat. No.	Outside Cat. No.
8	0	—	—	100-D…11	—	—
Sequence starts with…		—	—	100-D…11	—	—
7	1	100-DS2-20	100-DS1-20	100-D…11	100-DS1-11	100-DS2-20
Sequence starts with…		7/8	3/4	100-D…11	1/2	5/6
6	2	100-DS2-20	100-DS1-11	100-D…11	100-DS1-11	100-DS2-20
Sequence starts with…		7/8	3/4	100-D…11	1/2	5/6
5	3	100-DS2-20	100-DS1-11	100-D…11	100-DS1-11	100-DS2-11
Sequence starts with…		7/8	3/4	100-D…11	1/2	5/6
4	4	100-DS2-11	100-DS1-11	100-D…11	100-DS1-11	100-DS2-11
Sequence starts with…		7/8	3/4	100-D…11	1/2	5/6

Contactor cat. nos. 100-D95…D180 — Conventional DC coils

Contact Configuration		Auxiliary contact configurations
		Left Side Mounting			Right Side Mounting
N.O.	N.C.	Outside Cat. No.	Inside Cat. No.	For Use With	Inside Cat. No.	Outside Cat. No.
8	0	—	—	100-D…22L	—	—
Sequence starts with…		—	—	100-D…22L	—	—
7	1	—	—	100-D…22L	—	—
Sequence starts with…		—	—	100-D…22L	—	—
6	2	100-DS2-20	100-DS1-11	100-D…22L	100-DS1-L11¬	100-DS2-20
Sequence starts with…		7/8	3/4	100-D…22L	1/2	5/6
5	3	100-DS2-20	100-DS1-11	100-D…22L	100-DS1-L11¬	100-DS2-11
Sequence starts with…		7/8	3/4	100-D…22L	1/2	5/6
4	4	100-DS2-11	100-DS1-11	100-D…22L	100-DS1-L11¬	100-DS2-11
Sequence starts with…		7/8	3/4	100-D…22L	1/2	5/6

¬ With conventional DC control, the pickup winding must be interconnected with the N.C. late-breaking auxiliary contacts.