Catalogs > Industrial Controls Catalog > Motor Control, IEC > Contactors > Bulletin 100-D IEC Contactors
Bulletin 100-D IEC Contactors
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Bulletin 100-D/104-D Accessories | |
| Bulletin 100/104-K, 100/104-C, 100/104-D, 100S/104S-C, 100S-D Specifications | |
Bulletin 100-D/104-D Life-Load Curves | |
Bulletin 100-D Approximate Dimensions | |
Renewal Parts | |
Dimensions in millimeters. Dimensions are not intended to be used for manufacturing purposes.
Bulletin 100-D Contactors and Accessories
|
Mounting Position
|
| Cat. No. | a | b | c | c1 | Æd | d1 | d2 | Æe | e1 | e2 | e3 | e4 |
| 100-D95, 100-D110 | 120 | 170 | 156 | 110.5 | 5.2 | 145 | 100 | M6 | 16 | 38.5 | 147 | 8 |
| 100-D95E…100-D180E, 100-D140, 100-D180 | 120 | 170 | 156 | 110.5 | 5.2 | 145 | 100 | M8 | 20 | 39 | 160 | 10 |
| 100-D210E…100-D420E | 155 | 205 | 180 | 110.5 | 6.5 |
180 | 130 | M10 | 25 | 48 | 193 | 12.5 |
| 100-D630E…100-D860E | 255 | 310 | 265 | 110.5 | 10 | 230 | 225 | M12 | 40 | 70 | 291 | 22 |
| Contactor with | mm | |
| Auxiliary contact block ¬ | 100-DS1… 100-DS2… |
a a + 13.5 each |
| Mechanical Interlock | 100-DM… | a + a |
| Frame terminal block | 100-DTB110 100-DTB180 100-DTB420 |
b + 7 each b + 7 each b + 8.5 each |
| Label holder | c…+ 5 | |
¬ Conventional DC coil contactors will have an additional auxiliary contact block that will add 13.5 mm to the “a” dimension on the right-hand side.