Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 132/133-C IEC Pump Control Panels
Bulletin 132/133-C IEC Pump Control Panels
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Bulletin 100 Line Starter Accessories | |
Modifications | |
Bul. 100 Line Starters Approximate Dimensions | |
|
Bulletins 132 and 133 IEC Pump Control Panel Starters
- IP32 (Type 3R)
- Bimetallic Class 10 overload relays
- Solid-state overload relays
- Enclosure with extra panel space for mounting accessory devices
- Factory-installed disconnect switch or circuit breaker
- Handle with defeater mechanism
- Service entrance rated
Bulletin 132 and 133 pump control panels are specifically designed for irrigation and similar outdoor pumping applications.
The Bulletin 132 pump control panel includes a Bulletin 194R IEC fusible rotary disconnect switch, a Bulletin 100 IEC contactor, a Bulletin 193 bimetallic overload relay or solid-state overload relays, a HAND-OFF-AUTO selector switch, and a START button. All starters include a normally open auxiliary contact as standard. The Bulletin 133 pump control panels are supplied with a motor circuit protector instead of a fusible disconnect switch. IEC pump control panels include an IP32 (Type 3R) weather-resistant enclosure with a rugged, outdoor finish and brackets for pole or cross-bar mounting. Conduit knockouts are located at the bottom of the enclosure. Padlock provisions are furnished on the door latches and the handle (both the ON and OFF positions).
Your order must include: Cat. No. of the pump control panel, coil voltage code, overload relay suffix code, and, if required, factory-installed modifications suffix code and/or Cat. No. of any accessories.