Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 103H/107H/140M Enclosed Combination Starters and Motor Protectors
Bulletin 103H/107H/140M Enclosed Combination Starters and Motor Protectors
| Introduction |  |
Features | |
Standards Compliance and Certifications | |
Product Selection | |
Modifications | |
Wiring Diagram | |
Enclosure Dimensions | |
Bulletin 103H/107H Factory Installed Modifications
Note:For modifications add (option code ♣ ) for desired features to cat. no.
♣ Add desired option codes. Example: 103H-AND2-CA16X-KY
| Coil Options | |
| JE⋆ | Electronic Interfaces (100-C) |
| R⋆ | Surge Suppressor RC (100-C) |
| V⋆ | Surge Suppressor Varistor (100-C) |
| D⋆ | Surge Suppressor Diode (100-C) |
| Additional Contactor Auxiliaries (Side Mount) | |
| S01⋆ | 1 N.C. |
| S10⋆ | 1 N.O. |
| S11⋆ | 1 N.O. + 1 N.C. |
| S20⋆ | 2 N.O. |
| Additional 140M Auxiliaries (Side Mount) | |
| A02 | 2 N.C. |
| A20 | 2 N.O. |
| A11 | 1 N.O. + 1 N.C. |
| Additional 140M Trip Contacts (Side Mount) | |
| R00 | 1 N.O. Thermal-Mag + 1 N.O. Mag Only |
| R01 | 1 N.O. Thermal-Mag + 1 N.C. Mag Only |
| R10 | 1 N.C. Thermal-Mag + 1 N.O. Mag Only |
| R11 | 1 N.C. Thermal-Mag + 1 N.C. Mag Only |
| M11 | 1 N.O. Mag Only + 1 N.C. Mag Only |
| Control Options | |
| 1 | Push Button — 103H Start-Stop / 107H For-Rev-Stop |
| 1M | Multifunction Push Button — 103H Start-Stop / 107H For-Rev-Stop |
| 14RM | Multifunction Push Button — 103H Start-Stop-Pilot Light |
| 3 | Selector Switch — 103H Hand-Off-Auto / 107H For-Off-Rev |
| 4R | Pilot Light (red, ON) (103H only) |
| 4RW | Pilot Light (red—FOR, White — REV) (107H only) |
| 6P‡ § | Control Transformer§ (not available with enclosure size A) |
| KY | Bulletin 140M External Handle — Red/Yellow |
⋆ 107H - One per contactor, for a total of two per option code.
‡ Starters in enclosure size "A" will change to enclosure size "B" when a control transformer is factory installed.
§ Auxiliary contacy option "A20" is required when seelcting this control transformer.
140M Factory Installed Modifications (Enclosed)
Note:For modifications add (option code ♣ ) for desired features to cat. no.
♣ Add desired option codes. Example: 140M-F-CA16X-UVB
| Modifications | |
| UVÄ | Undervoltage Trip |
| SNÄ | Shunt Trip |
| Additional 140M Auxiliaries (Side Mount) | |
| A02 | 2 N.C. |
| A20 | 2 N.O. |
| A11 | 1 N.O. + 1 N.C. |
| Additional 140M Trip Contacts (Side Mount) | |
| R00 | 1 N.O. Thermal-Mag + 1 N.O. Mag Only |
| R01 | 1 N.O. Thermal-Mag + 1 N.C. Mag Only |
| R10 | 1 N.C. Thermal-Mag + 1 N.O. Mag Only |
| R11 | 1 N.C. Thermal-Mag + 1 N.C. Mag Only |
| M11 | 1 N.O. Mag Only + 1 N.C. Mag Only |
Line and Coil Voltage Codes
µ Line Voltage Codes
The Cat. No. as listed is incomplete. Select a line voltage code from the table below to complete the Cat. No.
Example: 208V 60 Hz: Cat. No. 103H-AFµÄ2-CA16X becomes Cat. No. 103H-AFHÄ2-CA16X.
| Line Voltages [V] | 208 | 230 | 240 | 380 | 400 | 415 | 480 | 600 |
| 60 Hz | H | — | A | — | — | — | B | C |
| 50 Hz | — | F | — | N | KN | G | — | — |
Ä Coil Voltage Codes
The Cat. No. as listed is incomplete. Select a coil voltage code from the table below to complete the Cat. No.
Example: 120V 60 Hz: Cat. No. 103H-AFHÄ-CA16X becomes Cat. No. 103H-AFHD2-CA16X.
| Standard Coil Voltages [V] |
24 | 110 | 120 | 208 | 220…230 | 240…260 | 277 | 380…400 | 415 | 480 | 600 |
| AC, 50 Hz | K | D | P | — | F | — | — | N | B | — | — |
| AC, 60 Hz | J | — | D | H | — | A | T | — | — | B | C |
| AC, 50/60 Hz | KJ | KD | — | — | — | — | — | — | — | — | — |
| Standard Coil Voltages [V] |
24 | |
| DC | Standard | ZJ |
| With integrated diode | KJ | |