Enclosed Starters

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 120E-C IEC Multi-Speed Starters

Bulletin 120E-C IEC Multi-Speed Starters

Product Selection

Enclosed Type — AC Operated

2-Speed Separate Winding, Constant or Variable Torque (Constant Horsepower—Consult your local Rockwell Automation sales office or Allen-Bradley distributor)

Ratings (AC3, AC4)								IP42 (Type 1) General Purpose Sheet Metal Enclosure (Lift-off Cover through 120E-C72)	IP66 (Type 3/4/12) Watertight, Dusttight Sheet Metal Enclosure (Hinged Cover)
Max Ie [A]	kW	Hp
	3Æ	1Ƭ		3Æ				Cat. No.	Cat. No.
	380V/415V	115V	230V	200V	230V	460V	575V
9	4	1/2	1-1/2	2	2	5	7-1/2	120E-C09Aĵµ	120E-C09Fĵµ
12	5-1/2	1/2	2	3	3	7-1/2	10	120E-C12Aĵµ	120E-C12Fĵµ
16	7-1/2	1	3	5	5	10	15	120E-C16Aĵµ	120E-C16Fĵµ
23	11	2	3	5	7-1/2	15	15	120E-C23Aĵµ	120E-C23Fĵµ
30	15	2	5	7-1/2	10	20	25	120E-C30Aĵµ	120E-C30Fĵµ
37	18-1/2	3	5	10	10	25	30	120E-C37Aĵµ	120E-C37Fĵµ
43	22	3	7-1/2	10	15	30	30	120E-C43Aĵµ	120E-C43Fĵµ
60	30	5	10	15	20	40	50	120E-C60Aĵµ	120E-C60Fĵµ
72	37	5	10	20	25	50	60	120E-C72Aĵµ	120E-C72Fĵµ
85	45	7-1/2	15	25	30	60	60	120E-C85Aĵµ	120E-C85Fĵµ

Ä Coil Voltage Code

The Cat. No. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the Cat. No. Example:
Cat. No. 120E-C09Aĵµµ becomes Cat. No. 120E-C09ABµµ.

AC Voltage [V]		24	48	110	120	208	208… 240	220	240	277	380… 400	400… 415	440	480	500	600
Common ControlT  Coil Voltage Code	50 Hz	—	—	—	—	—	—	A	T	—	N	G	B	—	M	—
	60 Hz	—	—	—	—	H	L	—	A	—	—	—	N	B	—	C
Separate Control (without transformer) Coil Voltage Code	50 Hz	K	Y	D	—	—	—	—	—	—	—	—	—	—	—	—
	60 Hz	J	X	—	D	—	—	—	—	T	—	—	—	—	—	—

µ Overload Relay Code

The Cat. No. as listed is incomplete. Select two overload relay codes from Bulletin 193 E1 Plus electronic overload relay for 3-phase applications:
Selectable Trip Class 10, 15, 20, 30, selectable manual/auto reset to complete the Cat. No. The first code will denote the high speed overload relay, and the second code will denote the low speed overload relay.

¬ For single-phase (1Æ) applications, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
T When selecting a factory-installed control circuit transformer (see Modifications), use the Common Control Coil Voltage Code to denote the transformer primary voltage. The starter coil and transformer secondary voltage will both be 120V by default. Example: Cat. No. 120E-C09FBµµ-6P will have a transformer with a 480V primary/120V secondary and a 120V starter coil. If a starter coil voltage other than 120V is desired, a second Coil Voltage Code must be added to denote the coil/transformer secondary voltage. Example: Cat. No. 12E-C09FBJµµ-6P will have a transformer with a 480V primary/24V secondary and a 24V starter coil.