Enclosed Starters

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 109-C IEC Non-Reversing Starters

Bulletin 109-C IEC Non-Reversing Starters

Product Selection

Product Selection — AC-Operated Starters

Standard Enclosed Type — Sheet Metal

Ratings (AC3, AC4)								IP42 (Type 1) General Purpose Sheet Metal Enclosure (Liftoff Cover)	IP66 (Type 3, 4, 12) Watertight, Dusttight Sheet Metal Enclosure (Hinged Cover)
Max Ie [A]	kW	Hp
	3-Phase	1-Phase		3-Phase				Cat. No.	Cat. No.
	380V/415V	115V	230V	200V	230V	460V	575V
9	4	1/2	1-1/2	2	2	5	7-1/2	109-C09Aĵ	109-C09Fĵ
12	5-1/2	1/2	2	3	3	7-1/2	10	109-C12Aĵ	109-C12Fĵ
16	7-1/2	1	3	5	5	10	15	109-C16Aĵ	109-C16Fĵ
23	11	2	3	5	7-1/2	15	15	109-C23Aĵ	109-C23Fĵ
30	15	2	5	7-1/2	10	20	25	109-C30Aĵ	109-C30Fĵ
37	18-1/2	3	5	10	10	25	30	109-C37Aĵ	109-C37Fĵ
43	22	3	7-1/2	10	15	30	30	109-C43Aĵ	109-C43Fĵ
60	30	5	10	15	20	40	50	109-C60Aĵ	109-C60Fĵ
72	37	5	15	20	25	50	60	109-C72Aĵ	109-C72Fĵ
85	45	7-1/2	15	25	30	60	60	109-C85Aĵ	109-C85Fĵ

Ä Coil Voltage Code

The Cat. No. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the Cat. No. Example: Cat. No. 109-C09Aĵ becomes Cat. No.109-C09ABµ.

AC Voltage [V]		24	48	110	120	208	208…240	220	240	277	380…400	400…415	440	480	500	600
Common Control§  Coil Voltage Code	50 Hz	—	—	—	—	—	—	A	T	—	N	G	B	—	M	—
	60 Hz	—	—	—	—	H	L	—	A	—	—	—	N	B	—	C
Separate Control (without transformer) Coil Voltage Code	50 Hz	K	Y	D	—	—	—	—	—	—	—	—	—	—	—	—
	60 Hz	J	X	—	D	—	—	—	—	T	—	—	—	—	—	—

µ Overload Relay Code

The Cat. No. as listed is incomplete. Select an overload relay code from Bulletin 193 E1 Plus electronic overload relay for 3-phase applications:
Selectable Trip Class 10, 15, 20, 30, selectable manual/auto reset to complete the Cat. No. Select an overload relay code from E1 Plus Overload Relay for 3Æ Applications: Phase Loss Protection, Class 10 or 20 to complete the Cat. No. Bimetal overload relays are not available in molded plastic enclosed starters.

§ When selecting a factory-installed control circuit transformer (see Full Voltage Non-Reversing Starters and Lighting Contactors (Bulletins 109 with metal enclosures, 100L)), use the Common Control Coil Voltage Code to denote the transformer primary voltage. The starter coil and transformer secondary voltage will both be 120V by default. Example: Cat. No. 109-C09FBµ-6P will have a transformer with a 480V primary/120V secondary and a 120V starter coil. If a starter coil voltage other than 120V is desired, a second Coil Voltage Code must be added to denote the coil/transformer secondary voltage. Example: Cat. No. 109-C09FBJµ-6P will have a transformer with a 480V primary/24V secondary and a 24V starter coil. Control Circuit transformers are not available in molded plastic enclosures