Enclosed Starters

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 109-C IEC Non-Reversing Starters

Bulletin 109-C IEC Non-Reversing Starters

Bulletin 100 Line Starter Accessories

For Bulletins 105, 106, 109, 112, and 113

	Description		For Use With Bulletin No.	Enclosure Type	Cat. No.
	Red "ON" Pilot Light⋆  Full Voltage Type	120V	All	Metal Lift-off, Metal Hinged, and Molded Plastic	‡	198-PL21R
		208V			‡	198-PL25R
		240V			‡	198-PL22R
		24V	103H	Metal Hinged	‡	198-PL26R
		120V			‡	198-PL27R
		240V			‡	198-PL28R
	Green Pilot Light⋆  Full Voltage Type	24V	All	Metal Lift-off, Metal Hinged, and Molded Plastic	‡	198-PL26G
		120V	All		‡	198-PL21G
		240V	All		‡	198-PL22G
	Dual "ON" Pilot Light⋆  Forward — Red Reverse — White Full Voltage Type	120V	105, 106	Metal Hinged	198-PL21RW
		240V			198-PL22RW
	Pilot Device Mounting Bracket (required when mounting pilot devices in metal lift-off enclosures)		105, 109	Metal Lift-off	198-BR1
	Control Circuit Fuse Block For Class CC rejection type fuses (fuses not included)		All	Metal Lift-off and Metal Hinged	1491-R162
	Grounding Bushing Adapts to 1/2 in. N.P.T., PG 16.5 & BS20 mm threads		109	Molded Plastic	198-GR1
	Single Pole N.O. Auxiliary Contact for Disconnect Switch		106, 112	Metal Hinged	§	195-GA10
	Closing Button For 22.5mm Round Panel Hole		All	All	198-N1
	"OFF-ON" Selector Switch 2-Position Maintained		All	Metal Lift-off and Metal Hinged	‡	198-MT3
⋆ Does not include legend plate. See Two-Color Molded Legend Caps — Non-Illuminated Push Buttons for Bulletin 800F Legend Plate. Legend Plates for use on metal-hinged enclosures only.
‡ Requires mounting bracket Cat. No. 198-BR1 when using metal lift-off enclosures.
§ An auxiliary contact adaptor, Cat. No. 194R-AA, is required when installing auxiliary contact, Cat. No. 195-GA10.
♣ 3 required for disconnect switch.

For Bulletins 105, 106, 109, 112, and 113

	Description	For Use With Bulletin No.	Enclosure Type	Cat. No.
	"HAND-OFF-AUTO" Selector Switch 3-Position Maintained, Includes Legend Plate	105, 106, 109, 112, 113	Metal Lift-off and Metal Hinged	⋆	198-MT1
		103H	Metal Hinged	198-MT4
	"FORWARD-OFF-REVERSE" Selector Switch 3-Position Maintained	105, 106	Metal Lift-off and Metal Hinged	⋆	198-MT2
	"START-STOP" Push Button Flush green "I/START" Extended red "O/STOP"	105, 109	Metal Lift-off	⋆	198-MS3
		103H	Metal Hinged	198-MS23
	"START" Push Button Flush green "START"	All	Metal Hinged	198-MS13
	"ON-OFF" Push Button	105, 109	Metal Lift-off	⋆	198-MS6
	"FORWARD, REVERSE-STOP" Push Button	105	Metal Lift-off	⋆	198-MS7
	"STOP" Push Button Flush red "STOP"	All	Metal Hinged	198-MS14
	"ON" Push Button Flush green "ON"	All	Metal Hinged	198-MS15
	"OFF" Push Button Flush red "OFF"	All	Metal Hinged	198-MS16
	"FORWARD, REVERSE-STOP" Push Buttons	105, 106	Metal Hinged	198-MS17
	"START" Push Button Flush green "START" and "STOP" Push Button Flush red "STOP"	103H	Metal Hinged	198-MS22
	"RESET" Push Button	All	Metal Lift-off and Metal Hinged	‡	198-MR3
	Wiring Kit for Starters IEC ModCenter	103H	—	198-W103H
		109	—	198-W109
		112	—	198-W112
	Wiring Kit for Transformers IEC ModCenter	103H	—	198-WT2
		109, 112	—	198-WT1
⋆ Requires mounting bracket Cat. No. 198-BR1 when using metal lift-off enclosures.
‡ Requires reset adapter Cat. No. 193-RA3 for 193-T1 bimetallic overload relay and reset adapter Cat. No. 193-ERA for Bulletin 193 E1 Plus electronic overload relay.