Enclosed Starters

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 105-C IEC Reversing Starters

Bulletin 105-C IEC Reversing Starters

Your order must include: Cat. No. of the reversing starter selected, coil voltage code, overload relay suffix code, and, if required, factory-installed modifications suffix code and/or Cat. No. of any accessories.

Product Selection

AC-Operated

Ratings (AC3, AC4)								IP42 (Type 1) General Purpose Sheet Metal Enclosure (Lift-off cover through 105-C72)	IP66 (Type 3/4/12) Watertight, Dusttight Sheet Metal Enclosure (Hinged Cover)
Max Ie [A]	kW	Hp
	3Æ	1Æ ¬		3Æ				Cat. No.	Cat. No.
	380V/ 415V	115V	230V	200V	230V	460V	575V
9	4	1/2	1-1/2	2	2	5	7-1/2	105-C09Aĵ	105-C09Fĵ
12	5-1/2	1/2	2	3	3	7-1/2	10	105-C12Aĵ	105-C12Fĵ
16	7-1/2	1	3	5	5	10	15	105-C16Aĵ	105-C16Fĵ
23	11	2	3	5	7-1/2	15	15	105-C23Aĵ	105-C23Fĵ
30	15	2	5	7-1/2	10	20	25	105-C30Aĵ	105-C30Fĵ
37	18-1/2	3	5	10	10	25	30	105-C37Aĵ	105-C37Fĵ
43	22	3	7-1/2	10	15	30	30	105-C43Aĵ	105-C43Fĵ
60	30	5	10	15	20	40	50	105-C60Aĵ	105-C60Fĵ
72	37	5	15	20	25	50	60	105-C72Aĵ	105-C72Fĵ
85	45	7-1/2	15	25	30	60	60	105-C85Aĵ	105-C85Fĵ

Ä Coil Voltage Code

    The Cat. No. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the Cat. No. Example:
Cat. No. 105-C09Aĵ becomes Cat. No. 105-C09ABµ.

AC Voltage		24	48	110	120	208	208… 240	220	240	277	380… 400	400… 415	440	480	500	600
Common ControlT  Coil Voltage Code	50 Hz	—	—	—	—	—	—	A	T	—	N	G	B	—	M	—
	60Hz	—	—	—	—	H	L	—	A	—	—	—	N	B	—	C
Separate Control (without transformer) Coil Voltage Code	50 Hz	K	Y	D	—	—	—	—	—	—	—	—	—	—	—	—
	60Hz	J	X	—	D	—	—	—	—	T	—	—	—	—	—	—

µ Overload Relay Code

    The Cat. No. as listed is incomplete. Select an overload relay code from Bulletin 193 E1 Plus electronic overload relay for 3-phase applications:
Selectable Trip Class 10, 15, 20, 30, selectable manual/auto reset to complete the Cat. No.

¬ For single-phase (1Æ) applications, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
T When selecting a factory-installed control circuit transformer (see Modifications Full Voltage Non-Reversing Starters and Lighting Contactors (Bulletins 109, 100L)), use the Common Control Coil Voltage Code to denote the transformer primary voltage. The starter coil and transformer secondary voltage will both be 120V by default. Example: Cat. No. 105-C09FBµ-6P will have a transformer with a 480V primary/120V secondary and a 120V starter coil. If a starter coil voltage other than 120V is desired, a second Coil Voltage Code must be added to denote the coil/transformer secondary voltage. Example: Cat. No. 105-C09FBJµ-6P will have a transformer with a 480V primary/24V secondary and a 24V starter coil.