Enclosed Starters

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Enclosed Starters > Bulletin 106-C IEC Reversing Combination Starters Fusible Disconnect Type

Bulletin 106-C IEC Reversing Combination Starters Fusible Disconnect Type

Product Selection

Your order must include: Cat. No. of the reversing combination starter selected, coil voltage code, overload relay suffix code, and, if required, factory-installed modifications suffix code and/or Cat. No. of any accessories.

Fusible Disconnect Type
AC Operated

Ratings (AC3, AC4)							IP42 (Type 1) General-Purpose Sheet Metal Enclosure (Hinged Cover)	IP66 (Type 3, 4, 12) Watertight, Dusttight Sheet Metal Enclosure (Hinged Cover)
Max Ie [A]	kW	Hp				Fuse Clip Rating Amperes/UL Class
	3-Phase	3-Phase					Cat. No.	Cat. No.
	380…415V	200V	230V	460V	575V
9	4	2	2	5	7-1/2	30 A/Class J	106-C09Aĵ	106-C09Fĵ
12	5-1/2	3	3	7-1/2	10	30 A/Class J	106-C12Aĵ	106-C12Fĵ
23	11	5	7-1/2	15	15	30 A/Class J	106-C23Aĵ	106-C23Fĵ
30	15	7-1/2	10	20	25	60 A/Class J	106-C30Aĵ	106-C30Fĵ
43	22	10	15	30	30	60 A/Class J	106-C43Aĵ	106-C43Fĵ
60	30	15	20	40	50	100 A/Class J	106-C60Aĵ	106-C60Fĵ
72	37	20	25	50	60	100 A/Class J	106-C72Aĵ	106-C72Fĵ

Ä Coil Voltage Code

    The Cat. No. as listed is incomplete. Select a Coil Voltage Code from the table below to complete the Cat. No. Example:
Cat. No. 106-C09Aĵ becomes Cat. No. 106-C09ABµ.

Voltage		208V	230…240V	460…480V	575…600V
Common Control ⋆  Coil Voltage Code	60 Hz	H	A	B	C
120V — Separate Control (without transformer) Coil Voltage Code		AD	AD	CD	CD

µ Overload Relay Code

    The Cat. No. as listed is incomplete. Select an overload relay code from Bulletin 193 E1 Plus electronic overload relay for 3-phase applications:
Selectable Trip Class 10, 15, 20, 30, selectable manual/auto reset to complete the Cat. No.

⋆ When selecting a factory-installed control circuit transformer (see Modifications Full Voltage Non-Reversing Starters and Lighting Contactors (Bulletins 109 with metal enclosures, 100L)), use the Common Control Coil Voltage Code to denote the transformer primary voltage. The starter coil and transformer secondary voltage will both be 120V by default. Example: Cat. No. 106-C09FBµ-6P will have a transformer with a 480V primary/120V secondary and a 120V starter coil. If a starter coil voltage other than 120V is desired, a second Coil Voltage Code must be added to denote the coil/transformer secondary voltage. Example: Cat. No. 106-C09FBJµ-6P will have a transformer with a 480V primary/24V secondary and a 24V starter coil.