Catalogs > Industrial Controls Catalog > Motor Control, IEC > Overload Relays > Bulletin 193 E1 Plus Solid-State Overload Relays
Bulletin 193 E1 Plus Solid-State Overload Relays
| Introduction |  |
Standards Compliance and Certifications | |
Product Overview | |
Catalog Number Explanation | |
| Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
| Description | For Use With | Pkg. QuantityPQ | Cat. No. | |
|
DIN Rail/Panel Adapter For separate mounting – can be mounted to top-hat rail EN 50 022-35. |
193-ED1_B, 193-EE_B, 193S-EE_B, 193-EE_Z, 592-EE_T | 1 | 193-EPB |
| 193-ED1_D, 193-EE_D, 193S-EE_D | 193-EPD | |||
| 193-EE_E, 193S-EE_E | 193-EPE | |||
|
Current Adjustment Shield Prevents inadvertent adjustment of the current setting. Must be ordered in multiples of package quantities. |
193-ED (all) 193-EE (all) 592-EE (all) |
10 | 193-BC8 |
|
External Reset Adapter For enclosed, through-the-door reset applications. Use with external reset button. |
193-ED (all) 193-EE_B, 193-EE_D, 193-EE_E 193-EE_Z |
1 | 193-ERA |
|
External Reset Button for Enclosed Devices | 193-E all | 1 | 800FM-R611Button |
|
800F-ATR08Rod | |||
|
Terminal Lugs Set of two Protection class IP2X per IEC 60529 and DIN 40050 |
100-D140, 100-D180, 100-D95E…D180E, 193-EC_F, 193-EE_F | 2 | 100-DTB180 |
| 100-D210...100-D420, 193-EC_G, 193-EF2C, 193-EE_G | 2 | 100-DTB420 | ||
|
Terminal Lugs, Copper Frame Set of three |
100-D95E, 100-D110E, 193-EC_F, 193-EE_F | 3 | 100-DLE110 |
| 3 | 100-DL180 | |||
| 100-D210…100-D420, 193-EC_G, 193-EE_G | 3 | 100-DL420 | ||
| 100-D630, 100-D860, 193-EC_H, 193-EE_H | 3 | 100-DL630 | ||
| 3 | 100-DL860 | |||
|
Terminal Covers Protection class IP20 per IEC 60529 and DIN 40 050 For direct-on-line, reversing, two-speed, and wye-delta/star-delta assemblies |
100-D95…100-D180, 193-EC_F, 193-EE_F | 1 | 100-DTC180 |
| 100-D210...100-D420, 193-EC_G, 193-EE_G | 1 | 100-DTC420 | ||
| 100-D630…100-D860, 193-EC_H, 193-EE_H | 1 | 100-DTC860 | ||
|
Phase Barriers Set of 4 |
100-D630…D860, 193-EC_H, 193-EE_H | 4 | 100-DPB860 |
|
DeviceNet Configuration Terminal Used to interface with objects on a DeviceNet network. Includes 1 m communications cable (193-CB1). |
193-EC (all), 592-EC (all); 280/281/283/284 ArmorStart |
1 | 193-DNCT |
| 1 meter communication cable, color-coded bare leads | 193-DNCT | 1 | 193-CB1 | |
| 1 meter communication cable, microconnector (male) | 193-DNCT | 1 | 193-CM1 | |
| Panel Mount Adapter/Door Mount Bezel Kit | 193-DNCT | 1 | 193-DNCT-BZ1 | |
| Description | Size | For Use With | Pkg. Quantity | Cat. No. | |
|
Core Balanced Ground Fault Sensor |
20 mm (0.79 in.) | 100-C09…100-C37 NEMA size 00…2 |
1 | 193-CBCT1 |
|
40 mm (1.57 in.) | 100-C09…100-C85 NEMA size 00…3 |
1 | 193-CBCT2 | |
|
63 mm (2.5 in.) | 100-C09…100-C85, 100-D95…100-D180 NEMA size 00…4 |
1 | 193-CBCT3 | |
|
82 mm (3.25 in.) | 100-C09…100-C85, 100-D95…100-D420 NEMA size 00…5 |
1 | 193-CBCT4 | |
Side-Mount Expansion Modules¬
| Function | E1 Plus‡ (Cat. No. 193/592-EE_) |
E1 Plus w/ Jam Module (Cat. No. 193-EJM) |
E1 Plus w/ Ground Fault Module¬ (Cat. No. 193-EGF) |
E1 Plus w/ Ground Fault/Jam Module¬ (Cat. No. 193-EGJ) |
E1 Plus w/ PTC Module (Cat. No. 193-EPT) |
E1 Plus w/ Remote Reset Module (Cat. No. 193-ERR) |
|
| Manual/Automatic Reset | X | X | X | X | X | X | |
| Selectable Trip Class | 10 | X | X | X | X | X | |
| 15 | X | X | X | X | X | ||
| 20 | X | X | X | X | X | ||
| 30 | X | X | X | X | X | ||
| Jam Protection | On or Off | — | X | — | X | — | — |
| Trip Level | — | Adjustable 150/200/300/400% | — | Fixed @ 400% | — | — | |
| Trip Delay | — | Adjustable 0.5/1.0/2.0/4.0 s | — | Fixed @ 0.5 s | — | — | |
| Inhibit | — | Dynamic Inhibit‡ | — | Dynamic Inhibit‡ | — | — | |
| Ground Fault Protection | Type | — | — | Core-Balanced Ground Fault Protection¬ | Core-Balanced Ground Fault Protection¬ | — | — |
| On or Off | — | — | X | X | — | — | |
| Trip Level | — | — | Adjustable 20 mA…5 A§ | Adjustable 20 mA…5 A§ | — | — | |
| Trip Delay | — | — | Fixed @ 50 ms ± 20 ms |
Fixed @ 50 ms ± 20 ms |
— | — | |
| Inhibit | — | — | Dynamic Inhibit‡ | Dynamic Inhibit‡ | — | — | |
| PTC Protection | PTC Overtemperature Trip | — | — | — | — | X | — |
| PTC Open Circuit | — | — | — | — | X | — | |
| PTC Short Circuit | — | — | — | — | X | — | |
| Remote Reset Capability | — | X | X | X | X | X | |
| Fault Indication | — | — | X | X | X | — | |
| ‡ Dynamic Inhibit: Protective function is enabled after the motor current goes above 150% and then falls to below 125%. | |||||||
| ¬ Requires use of an external ground fault sensor, Cat. No. 193-CBCT_. | |||||||
| § From 20…100 mA for resistive loads only. | |||||||
| Description | For Use With | Pkg. QuantityPQ | Cat. No. | ||
|
E1 Plus DeviceNet and Protection Module Communicates motor diagnostic data via DeviceNet, includes additional I/O, and provides enhanced motor protection options.¬ |
193-EE (all), 592-EE (all), 193S-EE (all), 592S-EE (all) |
1 | 193-EDN | |
|
E1 Plus Jam Protection Module Provides Jam protection with adjustable trip level and trip delay setting. The module also provides an input to allow remote reset of a trip.¬ |
193-EE (all), 592-EE (all), 193S-EE (all), 592S-EE (all) |
1 | 193-EJM | |
|
E1 Plus Ground Fault Module Provides adjustable 20 mA…5 A ground fault protection. The module also provides an input to allow remote reset of a trip.¬ |
193-EE (all), 592-EE (all), 193S-EE (all), 592S-EE (all) | 1 | ‡ | 193-EGF |
|
E1 Plus Ground Fault/Jam Module Provides adjustable 20 mA…5 A ground fault and fixed jam protection. The module also provides an input to allow remote reset of a trip.¬ |
193-EE (all), 592-EE (all), 193S-EE (all), 592S-EE (all) | 1 | ‡ | 193-EGJ |
|
E1 Plus PTC Module Provides terminals for connection up to six PTC thermistor sensors. Sensors react to actual temperature and therefore provide enhanced motor protection. Module also provides an input to allow remote reset of a trip.¬ |
193-EE (all), 592-EE (all), 193S-EE (all), 592S-EE (all) |
1 | 193-EPT | |
|
E1 Plus Remote Reset Module Provides an input to allow remote reset of a trip.¬ |
193-EE (all), 592-EE (all), 193S-EE (all), 592S-EE (all) |
1 | 193-ERR | |
| Module Adjustment Cover Prevents inadvertent adjustment of setting. Must be ordered in multiples of package quantity. |
193-EJM | 25 | 193-EMC | ||
| ¬ Only one module may be added. | |||||
| ‡ Requires use of an external ground fault sensor (Cat. No. 193-CBCT_). | |||||
Marking Systems
Uniform labeling materials for contactors, motor starting equipment, timing relays and circuit breakers
| Description | Pkg. Qty.T | Cat. No. | |
|
Label Sheet 105 self-adhesive paper labels each, 6 x 17 mm |
10 | 100-FMS |
|
Marking Tag Sheet 160 perforated paper labels each, 6 x 17 mm, to be used with a transparent cover |
10 | 100-FMP |
| Transparent Cover To be used with marking tag sheets |
100 | 100-FMC | |
|
Marking Tag Adapters To be used with marking tag: System 1492 W |
100 | 100-FMA2 |
| PQ = Package Quantity Discount Group PRO |
|||
| T Must be ordered in multiples of package quantities. | |||