Catalogs > Industrial Controls Catalog > Motor Control, IEC > Overload Relays > Bulletin 193-M Bimetallic Overload Relays
Bulletin 193-M Bimetallic Overload Relays
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Specifications | |
Approximate Dimensions | |
|
Bulletin 193-M — Bimetallic Overload Relays
- Phase Failure Sensitivity
- Temperature Compensation
- Optional Auxiliary Contact (1 N.O. Contact)
- Manual Reset/Stop Button
- Built-in Connection Between N.C. Trip Contact (95) and Contactor
Coil Terminal (A2)
- “Trip Free” Construction
- Trip Indicator
Bulletin 193-M thermal overload relays are designed for use with Bulletin 100-M contactors and Bulletin 104-M reversing contactors. These class 10 ambient compensated thermal overload relays use integral heater elements; therefore, additional heater elements are not required.
The trip setting is adjustable over the listed motor full load current range. The overload relay can be operated in a manual reset mode only. An isolated normally open contact is optional.