Catalogs > Industrial Controls Catalog > Motor Control, IEC > Overload Relays > Bulletin 193-EF Solid-State Overload Relays
Bulletin 193-EF Solid-State Overload Relays
| Introduction |  |
Standards Compliance and Certifications | |
Product Overview | |
Catalog Number Explanation | |
| Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
Electronic Motor Protection Relays
| Mounts to Contactor | Adjustment Range [A] | Cat. No. | Cat. No.§ |
| 100-D95…100-D180§ | 20…180T | 193-EF1AÄ | 193-EF2AÄ |
| 100-D210…100-D420 | 160…400 | 193-EF1BÄ | 193-EF2BÄ |
| 100-D210…100-D420 | 160…630 | — | 193-EF2CÄ |
| § Contactor mounting requires the use of a bus bar mounting kit (Cat. Nos. 825-MVS or 825-MVS2). | |||
| T 0.5…20 A can be achieved by looping the motor supply cables. (Refer to the Specifications section.) Use cable support Cat. No. 193-HD. | |||
| § Device ships with the External Indication Module accessory (Cat. No. 193-LB1) included. | |||
Ä Coil Voltage Code
The catalog number as listed is incomplete. Select a coil voltage code from the table below for completion.
Example: Cat. No. 193-EF1AÄ becomes Cat. No. 193-EF1AKP.
| Voltage [V] | 24 | 36 | 48 | 110 | 120 | 230 | 240 | 400 | 415 | 440 |
| 50/60 Hz | KJ | KV | KY | KD | KP | KF | KA | KN | KG | KB |
| DC | ZJ | — | ZY | — | — | — | — | — | — | — |
Factory Modification Options
| Description | Suffix Code¬ |
| Automatic Reset of overload and thermistor overtemperature protection | -R |
| Remote Reset‡ | -F |
| External Indication§ | -L |
| ¬ Refer to the Catalog Number explanation section for the proper suffix code sequence. | |
| ‡ Device ships with the Remote Reset Module accessory (Cat. No. 193-RB1) included. | |
| § Device ships with the External Indication Module accessory (Cat. No. 193-LB1) included. | |