Motor Protection Circuit Breakers and Motor Circuit Protectors

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Motor Protection Circuit Breakers and Motor Circuit Protectors > Bulletin 140M Motor Protection Circuit Breakers

Bulletin 140M Motor Protection Circuit Breakers

Accessories

Description							Connection Diagram T	For Use With	Cat. No.
		Operator Position ¬			Term. No.	Description
		OFF	ON	Tripped
	Front-Mounted Auxiliary Contact 1-pole or 2-pole No additional space required -One only per MPCB	O	X	O	13-14	N.O. Aux		140M-C, D, F	140M-C-AFA10
		X	O	X	11-12	N.C. Aux		140M-C, D, F	140M-C-AFA01
		O	X	O	13-14	N.O. Aux		140M-C, D, F	140M-C-AFA11
		X	O	X	21-22	N.C. Aux
		O	X	O	13-14	N.O. Aux		140M-C, D, F	140M-C-AFA20
		O	X	O	23-24	N.O. Aux
		X	O	X	11-12	N.C. Aux		140M-C, D, F	140M-C-AFA02
		X	O	X	21-22	N.C. Aux
	Right Side-Mounted Auxiliary Contact 2-pole Adds 9 mm to the width of the device -Two per MPCB	O	X	O	33-34	N.O. Aux		140M-C, D, F	140M-C-ASA20
		O	X	O	43-44	N.O. Aux
		X	O	X	31-32	N.C. Aux		140M-C, D, F	140M-C-ASA02
		X	O	X	41-42	N.C. Aux
		O	X	O	33-34	N.O. Aux		140M-C, D, F	140M-C-ASA11
		X	O	X	41-42	N.C. Aux
¬ X = Contact Closed; O = Contact Open
T

Description							Connection Diagram T			For Use With	Cat. No.
		Operator Position ¬			Term. No.	Description
		OFF	ON	Tripped
								N.O.	N.C.
	Front-Mounted Trip Contact 2-pole Indicates tripping of device No additional space required	O	X	O	13-14	N.O. Aux		2	0	140M-C, D, F	140M-C-AFAR10A10
		O	O	X	27-28	N.O. Trip (Short-Circuit & Overload)
		X	O	X	11-12	N.C. Aux		1	1	140M-C, D, F	140M-C-AFAR10A01
		O	O	X	27-28	N.O. Trip (Short-Circuit & Overload)
	Right-Side Mounted Trip Contact 2-pole Indicates tripping of Motor Protection Circuit Breaker Adds 9 mm to the width of the circuit breaker -One only per MPCB -A right-side mounted auxiliary contact may be tandem mounted on top of this Trip Contact	O	O	X	57-58	N.O. Trip (Short-Circuit & Overload)		2	0	140M-C, D, F	140M-C-ASAR10M10
		O	O	X	67-68	N.O. Trip (Short-Circuit)
		O	O	X	57-58	N.O. Trip (Short-Circuit & Overload)		1	1	140M-C, D, F	140M-C-ASAR10M01
		X	X	O	65-66	N.C. Trip (Short-Circuit)
		X	X	O	55-56	N.C. Trip (Short-Circuit & Overload)		1	1	140M-C, D, F	140M-C-ASAR01M10
		O	O	X	67-68	N.O. Trip (Short-Circuit)
		X	X	O	55-56	N.C. Trip (Short-Circuit & Overload)		0	2	140M-C, D, F	140M-C-ASAR01M01
		X	X	O	65-66	N.C. Trip (Short-Circuit)
		O	O	X	77-78	N.O. Trip (Short-Circuit)		1	1	140M-C, D, F	140M-C-ASAM11
		X	X	O	65-66	N.C. Trip (Short-Circuit)
¬ X = Contact Closed; O = Contact Open
T

Description							Connection DiagramT			For Use With	Cat. No.
		Operator Position¬			Term. No.	Description
		OFF	ON	Tripped
								N.O.	N.C.
	Front-Mounted Auxiliary Contact Internal 2-pole -One per MPCB	O	X	O	13-14	N.O. Aux		2	0	140-CMN	140-CA20
		O	X	O	23-24	N.O. Aux
		X	O	X	11-12	N.C. Aux		0	2	140-CMN	140-CA02
		X	O	X	21-22	N.C. Aux
		O	X	O	13-14	N.O. Aux		1	1	140-CMN	140-CA11
		X	O	X	21-22	N.C. Aux
	Front-Mounted Trip-Indicating Auxiliary Contact Internal 2-pole -One per MPCB	O	O	X	37-38	N.O. Trip (Overload)		2	0	140-CMN	140-CT10-10
		O	O	X	43-44	N.O. Trip (Short-Circuit)
		X	X	O	35-36	N.C. Trip (Overload)		0	2	140-CMN	140-CT01-01
		X	X	O	41-42	N.C. Trip (Short-Circuit)
		X	X	O	35-36	N.C. Trip (Overload)		1	1	140-CMN	140-CT01-10
		O	O	X	43-44	N.O. Trip (Short-Circuit)
		O	O	X	37-38	N.O. Trip (Overload)		1	1	140-CMN	140-CT10-01
		X	X	O	41-42	N.C. Trip (Short-Circuit)
¬ X = Contact Closed O = Contact Open
T

Description		Connection Diagram¬	Trip Rating	For Use With	Cat. No.
	Undervoltage Trip Left-side mounted Adds 18 mm to the width of the circuit breaker Automatically trips MPCB/MCP when voltage falls below 35…70%		24V, 60 Hz	140M-C, D, F	140M-C-UXJ
			24V, 50 Hz		140M-C-UXK
			120V, 60 Hz		140M-C-UXD
			110V, 50 Hz		140M-C-UXC
			208V, 60 Hz		140M-C-UXH
			220…230V, 50 Hz		140M-C-UXF
			240…260V, 60 Hz		140M-C-UXA
			277V, 60 Hz		140M-C-UXT
			380…400V, 50 Hz		140M-C-UXN
			480V, 60 Hz/415V, 50 Hz		140M-C-UXB
			575V, 60 Hz/500V, 50 Hz		140M-C-UXM
			600V, 60 Hz		140M-C-UXVC
	Undervoltage Trip Left-side mounted 2 early make contacts integrated Adds 18 mm to the width of the circuit breaker Automatically trips MPCB/MCP when voltage falls below 35…70%		24V, 60 Hz	140M-C, D, F	140M-C-UCJ
			24V, 50 Hz		140M-C-UCK
			120V, 60 Hz		140M-C-UCD
			110V, 50 Hz		140M-C-UCC
			208V, 60 Hz		140M-C-UCH
			220…230V, 50 Hz		140M-C-UCF
			240…260V, 60 Hz		140M-C-UCA
			277V, 60 Hz		140M-C-UCT
			380…400V, 50 Hz		140M-C-UCN
			480V, 60 Hz/415V, 50 Hz		140M-C-UCB
			575V, 60 Hz/500V, 50 Hz		140M-C-UCM
			600V, 60 Hz		140M-C-UCVC
	Shunt Trip Left-side mounted Adds 18 mm to the width of the circuit breaker Provides remote tripping of the MPCB/MCP		24V, 60 Hz	140M-C, D, F	140M-C-SNJ
			24V, 50 Hz		140M-C-SNK
			110V, 50 Hz/120V, 60 Hz		140M-C-SND
			208V, 60 Hz		140M-C-SNH
			220…230V, 50 Hz		140M-C-SNF
			240…260V, 60 Hz		140M-C-SNA
			277V, 60 Hz		140M-C-SNT
			380…400V, 50 Hz		140M-C-SNN
			480V, 60 Hz/415V, 50 Hz		140M-C-SNB
			575V, 60 Hz/500V, 50 Hz		140M-C-SNM
			600V, 60 Hz		140M-C-SNVC
			24V DC		140M-C-SNZJ
	Undervoltage Trip Unit Internal, front-mounted Integrated short-circuit trip indication Automatically trips MPCB when voltage falls below 35…70%		24V, 50/60 Hz	140-CMN	140-CUV-KJ
			110V, 50 Hz/120V, 60 Hz		140-CUV-D
			220V, 50 Hz/240V, 60 Hz		140-CUV-A
	Shunt Trip Unit Internal, front-mounted Integrated short-circuit trip indication Provides remote tripping of the MPCB		24V, 50/60 Hz	140-CMN	140-CRT-KJ
			110V, 50 Hz/120V, 60 Hz		140-CRT-D
			220V, 50 Hz/240V, 60 Hz		140-CRT-A
¬
Package Quantity = 1 Discount Group = MAC

Description			For Use With	PQ	Cat. No.
	Anti-Tamper Shield Provides protection against inadvertent adjustment of the current setting	10 pcs/pkg	140M-C, D, F	10	140M-C-CA
	Lockable Twist Knob For one padlock 4…6 mm (1/4 in.) dia. shackle Can be locked in OFF position	Black	140M-C, D, F	1	140M-C-KN
		Red/Yellow	140M-C/-D	1	140M-C-KRY
		Red/Yellow	140M-F	1	140M-F-KRY
	Padlockable Operating Knob Accepts 8 mm (5/16 in.) dia. padlock — up to three padlocks Permits padlocking in the off position	Black	140-CMN	1	140-KN
		Red/Yellow		1	140-KRY
	Door Coupling Handle For three padlocks 4…8 mm (5/16 in.) dia. IP66 Protection/Type 1, 4, 4X, 12 Interlock override capability Can be modified for locking in ON position Ships with coupling — order extension shaft and legend plate separately Mounting depth (front of DIN Rail to front of enclosure door): 140M-C: 105.5 mm ± 5 mm (4.15 in. ± 3/16 in.) 140M-D: 114.5 mm ± 5 mm (4.5 in. ± 3/16 in.) 140M-F: 137.1 mm ± 5 mm (5.4 in. ± 3/16 in.) 140-CMN: 169 mm +/- 5 mm (6.7 in. +/- 3/16 in.)	Black	140M-C, D, F	1	140M-C-DN66
			140-CMN	1	140-CDN66
		Red/Yellow	140M-C, D, F	1	140M-C-DRY66
			140-CMN	1	140-CDRY66
	Extension Shaft Cut to required length for mounting depth (front of DIN Rail to front of enclosure door): 140M-C: 117…338 mm (4.6.…13.3 in.) 140M-D: 126…347 mm (5.0.…13.7 in.) 140M-F: 149…369 mm (5.9.…14.5 in.) 140-CMN: 180…403 mm (7.1.…15.9 in.)		140M-C-DN66, 140M-C-DRY66, 140-CDN66, 140-CDRY66	1	140M-C-DS
	Extension Shaft (Extended Length) Cut to required length for mounting depth (front of DIN Rail to front of enclosure door): 140M-C: 117…488 mm (4.6…19.2 in.) 140M-D: 126…497 mm (5.0…19.6 in.) 140M-F: 149…519 mm (5.9…20.4 in.) 140-CMN: 180…553 mm (7.1…21.8 in.)		140M-C-DN66, 140M-C-DRY66, 140-CDN66, 140-CDRY66	1	140M-C-DSL
	Coupler Included with Cat. Nos. 140M-C-DN66 and 140M-C-DRY66		140M-C, D, F	1	140M-C-DNC
	Legend Plate Marking: "Hauptschalter" and "Main Switch" Marking: "Not-Aus" and "Emergency Off"		140-CDN66	1	140M-C-DFCN
			140-CDRY66	1	140M-C-DFCRY
	Locking Tag Padlock attachment to the lockable handles Up to three padlocks 4…8 mm (5/16 in.) dia. shackle		140M-C-KN 140M-C-KRY 140M-F-KRY	1	140M-C-M3
	IP65 Non-Metallic Enclosure Knockouts for M20 and M25 fittings Suitable for flexible cable with internal ground wire or conduit when externally grounded around the outside of the enclosure (no UL approval)	Black Handle	140M-C	1	198E-AYTG2
		Red/Yellow Handle	140M-C	1	198E-AYTJ2
	Terminal Cover For covering of unused commoning link terminals IP2X finger protection		140M-C, 140M-D	1	140M-C-WS
			140M-F	1	140M-F-WS
	Screw Adapter For screw arrangement of a Motor Protection Circuit Breaker	10 pcs/pkg	140M-C, D, F	10	140M-C-N45
PQ = Package Quantity Discount Group = MAC

Description			For Use With	Cat. No.
	ECO Connecting Module — 12 and 25 A For DOL and reversing starters Eco-starters mount on single DIN Rail (140M on DIN Rail) Electrical and mechanical interconnection of 140M MPCB and 100-K contactors		140M-C to 100-K	140M-C-PEK12
	ECO Connecting Modules — 25 A Eco-starters mount on single DIN Rail (140M on DIN Rail) Electrical and mechanical interconnection of 140M MPCB and 100-C (with AC coils or 24V DC electronic coils) contactors		140M-C to 100-C09…C23	140M-C-PEC23
			140M-D to 100-C09…C23	140M-D-PEC23
	Connecting Modules — 25 and 45 A Contactor and MPCB MUST BE mounted separately on (2) DIN Rails Electrical interconnection between 140M MPCB and 100-C contactors (with AC coils)		140M-C to 100-C09…C23	140M-C-PNC23
			140M-D to 100-C09…C23	140M-D-PNC23
			140M-D to 100-C30…C37	140M-D-PNC37
			140M-F to 100-C30…C37	140M-F-PNC37
			140M-F to 100-C43	140M-F-PNC43
	Coil Modules — 25 A and 45 A For use with Bulletin 103T/107T 3-component starters		140M-C, -D to 100-C09…C23	140M-C-PSC23
			140M-D, -F to 100-C30…C43	140M-F-PSC43
	Spacing Adapter Required for Self-Protected combination motor controller (Type E) applications of Bul. 140M-C, -D, and -F MPCBs		140M-C, -D	140M-C-TE1
			140M-F	140M-F-TE
	Compact Busbar Feeder Block Supply of compact busbars Increases terminal capacity		140M-C, -D	140M-C-WBE
			140M-F	140M-F-WBE
	Compact Busbar Feeder Terminal For supply of commoning links Top feed — overlaps commoning link Meets UL Type E spacing requirements		140M-C, -D	140M-C-WTE
			140M-F	140M-F-WTE
	Three-Phase Compact Busbar for 25 A Motor Protection Circuit Breakers — 63 A Max. Continuous Current 45 mm spacing For use with front-mounted auxiliary contact	2 connections	140M-C, -D	140M-C-W452
		3 connections		140M-C-W453
		4 connections		140M-C-W454
		5 connections		140M-C-W455
	Three-Phase Compact Busbar for 25 A Motor Protection Circuit Breakers — 63 A Max. Continuous Current 54 mm spacing For use with side-mounted auxiliary contact	2 connections	140M-C, -D	140M-C-W542
		3 connections		140M-C-W543
		4 connections		140M-C-W544
		5 connections		140M-C-W545
	Three-Phase Compact Busbar for 25 A Motor Protection Circuit Breakers — 63 A Max. Continuous Current 63 mm spacing For use with side-mounted undervoltage trip and shunt trip	2 connections	140M-C, -D	140M-C-W632
		3 connections		140M-C-W633
		4 connections		140M-C-W634
		5 connections		140M-C-W635
	Jumper for 140M-D to 140M-C Accommodates difference in depth from Bul. 140M-D to 140M-C 54 mm spacing Can be used with all other commoning links	2 connections	140M-D to 140M-C	140M-C-WD542
	Three-Phase Compact Busbar for 45 A Motor Protection Circuit Breakers — 115 A Max. Continuous Current 54 mm spacing For use with front-mounted auxiliary contact	2 connections	140M-F	140M-F-W542
		3 connections		140M-F-W543
		4 connections		140M-F-W544
	Three-Phase Compact Busbar for 45 A Motor Protection Circuit Breakers — 115 A Max. Continuous Current 63 mm spacing For use with side-mounted auxiliary contact	2 connections	140M-F	140M-F-W632
		3 connections		140M-F-W633
		4 connections		140M-F-W634
	DIN (#3) Symmetrical Rail 35 x 7.5 x 1 m	10 pcs/kg	140M-D 140M-F	199-DR1
	DIN (#3) Symmetrical Rail 35 mm x 15 mm x 1 m long Top Hat Rail (DIN #3 Symmetrical Rail)	5 pcs/kg	140M-C 140M-D 140M-F 140-CMN	1492-DR9

Notes:  1. See Bulletin 140U for Internal and External Accessories for Bulletin 140M-H, J, L and N frames.

 2. Bulletin 140M-I frame Accessories such as auxiliaries, alarms, undervoltage and shunt trips are only available as factory installed modifications. See 140M Factory Modifications (Open).

Description		For Use With	Pkg. Quantity	Cat. No.
	Terminal End Cover — 0.25 in.	140M-I	1	140U-I-TC2
	Terminal End Cover — 0.41 in.			140U-I-TC4
	Terminal Shields (Plastic) IP20 Ingress Protection	140M-I	1	140U-I-TS1
	Padlockable Handle Lock Hasp — Off only Padlocking Hasp Lock-OFF only	140M-I	1	140U-I-PL
	End Cap Kit Provides 3-phase connections for terminal or bolt-on connections Metric Hardware	140M-I	1	140U-I-ECM
	Phase Barriers Provides additional phase clearance when special connections are required	140M-I	2	140U-I-PB
	Terminal Lugs Steel Terminal Copper/Aluminum wire #4-4/0 AWG	140M-I	3	140U-I-TLS1
	Terminal Lugs Stainless Steel Terminal Copper/Aluminum wire #4-4/0 AWG			140U-I-TLS2
	Rotary Close Couple Handle International Black handle	140M-I	1	140U-I-RCB
	Rotary Close Couple Handle International Red/Yellow handle			140U-I-RCR
	Operating Mechanism for External Handles	140M-I	1	198-H2
	External Handles
	Black/Grey IP66 (Type 3/3R/4/4X/12)	140M-I	1	190-HM4
	Red/Yellow IP66 (Type 3/3R/4/4X/12)			190-HM4E
	Black/Grey IP55 (Type 1)			190-HM1
	Red/Yellow IP55 (Type 1)			190-HM1E
	Overload Pre-trip Auxiliary Contact (AX) Opens contactor coil circuit on overload before MPCB trips (Automatic reset)	140M-J, -L (MPCB only)	1	140U-J-ER1RX

Description			For Use With	Pkg. Quantity	Cat. No.
	Extension Shafts		140M-I	5	194R-R3
	Standard Enclosure Working Depth [mm (in.)]
	Minimum	203 (8)
	Maximum	305 (12)
	Extended				194R-R4
	Minimum	203 (8)
	Maximum	508 (20)
Package Quantity = 1 Discount Group = MAC ¬ May be ordered in quantities of 20. Add the letter M to the end of the cat. no. (Example: 140M-C-PEM12M).

Description			For Use With	Pkg. Quantity	Cat. No.
	Flex-Cable Operating Mechanism NEMA Type 1/3/12/4/4X Flange-Mount Handle	3 ft. (0.9 m) Cable	140M-I	1	140U-I-FCX03
		4 ft. (1.2 m) Cable			140U-I-FCX04
		6 ft. (1.9 m) Cable			140U-I-FCX06
		10 ft. (3.0 m) Cable			140U-I-FCX10
	Flex-Cable Operating Mechanism Stainless Steel - Type 4/4X Flange Mount Handle	3 ft. (0.9 m) Cable			140U-I-FCS03
		4 ft. (1.2 m) Cable			140U-I-FCS04
		6 ft. (1.9 m) Cable			140U-I-FCS06
		10 ft. (3.0 m) Cable			140U-I-FCS10

Internal Control Modules — Field Installed

	Description		Diagram	Mounting Location	For Use With	Cat. No.
	Auxiliary Contact (AX) Electrically indicates "ON/OFF" status of breakers	(1) 1a-1b			140M-H, -J, -L	140U-H-EA1
					140M-N	140U-N-EA1
		(2) 1a-1b			140M-H, -J, -L	140U-H-EA2
				Left AND Right side	140M-N	140U-N-EA2
		(1) 1a-1b			140M-I (Note: adding this part in the field voids UL/CSA on the MPCB)	140U-I-EA1RX
				Right side only
	Alarm Contact (AL) Electrically indicates when the breaker is in the "TRIPPED" state	(1) 1M (make)-1B (break)			140M-H	140U-H-ER1
					140M-J, -L	140U-J-ER1
				Right side ONLY	140M-N	140U-N-ER1
					140M-I (Note: adding this part in the field voids UL/CSA on the MPCB)	140U-I-ER1LX
				Left side ONLY
	Auxiliary/Alarm Contact (AX/AL) Combination Combination of auxiliary contact and alarm contact	(1) 1a-1b (1) 1M (make)-1B (break)			140M-H	140U-H-EA1R1
					140M-J, -L	140U-J-EA1R1
				Right side only	140M-N	140U-N-EA1R1
	Overload Pre-trip Auxiliary Contact (AX) Opens contactor coil circuit on overload before MPCB trips (Automatic reset)	(1) 1a-1b			140M-J, -L (MPCB only)	140U-J-ER1RX
				Right side only
	Shunt Trip (SNT) Provides remote tripping of the circuit breaker Undervoltage trip not available when shunt trip is used	24…60 V, 50/60/DC			140M-H, -J, -L	140U-H-SNJ
		12…24V, 50/60/DC			140M-N	140U-N-SNJ
		110…240V, 50/60/DC			140M-H, -J, -L	140U-H-SND
		110…240V AC			140M-N	140U-N-SND
		380…440V AC, 220…250V DC			140M-H, -J, -L	140U-H-SNN
		380…440V AC, 220…250V DC			140M-N	140U-N-SNN
		380…600V, 50/60 Hz		Left side ONLY	140M-H, -J, -L	140U-H-SNB
		480…600V, 50/60 Hz			140M-N	140U-N-SNB
	Undervoltage Release (UVT) Automatically trips breaker when voltage falls between preset value, 35…70% Shunt trip is not available when undervoltage release is used	24V, 50/60 Hz			140M-H, -J, -L	140U-H-UJ
		=17,1114339			140M-N	140U-N-UJ
		110…127V, 50/60 Hz			140M-H, -J, -L	140U-H-UD
		=19,1114339			140M-N	140U-N-UD
		208…240V, 50/60 Hz			140M-H, -J, -L	140U-H-UA
		=23,1114339			140M-N	140U-N-UA
		380…500V, 50/60 Hz		Left side ONLY	140M-H, -J, -L	140U-H-UB
		=21,1114339		140M-N	140U-N-UB
		525…600V, 50/60 Hz		140M-H, -J, -L	140U-H-UC

	Description		For Use With	Cat. No.
	Terminal End Cover 6.4 mm (0.25 in.) diameter cable entry		140M-H	140U-H-TC2
			140M-I	140U-I-TC2
	Terminal End Cover 10.4 mm (0.41 in.) diameter cable entry		140M-H	140U-H-TC4
			140M-I	140U-I-TC4
	Terminal Shields IP20 Ingress Protection Rating		140M-H	140U-H-TS
			140M-I	140U-I-TS1
			140M-J	140U-J-TS
			140M-L	140U-L-TS
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted Non-Metallic - UL IP66, Type 1/3/12/4/4X Flange Mount Operating Handle	3 ft (0.9 m) Cable	140M-H	140U-H-FCX03
		4 ft (1.3 m) Cable		140U-H-FCX04
		6 ft (1.8 m) Cable		140U-H-FCX06
		10 ft (3.0 m) Cable		140U-H-FCX10
		3 ft. (0.9 m) Cable	140M-I	140U-I-FCX03
		4 ft. (1.2 m) Cable		140U-I-FCX04
		6 ft. (1.9 m) Cable		140U-I-FCX06
		10 ft. (3.0 m) Cable		140U-I-FCX10
		3 ft (0.9 m) Cable	140M-J	140U-J-FCX03
		4 ft (1.3 m) Cable		140U-J-FCX04
		6 ft (1.8 m) Cable		140U-J-FCX06
		10 ft (3.0 m) Cable		140U-J-FCX10
		4 ft (1.2 m) Cable	140M-L	140U-L-FCX04
		6 ft (1.9 m) Cable		140U-L-FCX06
		10 ft (3.0 m) Cable		140U-L-FCX10
		4 ft. (1.2 m) Cable	140M-N	140U-N-FCX04
		6 ft. (1.9 m) Cable		140U-N-FCX06
		10 ft. (3.0 m) Cable		140U-N-FCX10
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted Stainless Steel - Type 4/4X Flange Mount Operating Handle	3 ft (0.9 m) Cable	140M-H	140U-H-FCS03
		4 ft (1.3 m) Cable		140U-H-FCS04
		6 ft (1.8 m) Cable		140U-H-FCS06
		10 ft (3.0 m) Cable		140U-H-FCS10
		3 ft. (0.9 m) Cable	140M-I	140U-I-FCS03
		4 ft. (1.2 m) Cable		140U-I-FCS04
		6 ft. (1.9 m) Cable		140U-I-FCS06
		10 ft. (3.0 m) Cable		140U-I-FCS10
		3 ft (0.9 m) Cable	140M-J	140U-J-FCS03
		4 ft (1.3 m) Cable		140U-J-FCS04
		6 ft (1.8 m) Cable		140U-J-FCS06
		10 ft (3.0 m) Cable		140U-J-FCS10
		4 ft (1.2 m) Cable	140M-L	140U-L-FCS04
		6 ft (1.9 m) Cable		140U-L-FCS06
		10 ft (3.0 m) Cable		140U-L-FCS10

	Description		For Use With	Cat. No.
	Rotary, Variable-Depth Operating Mechanism Rotary handle - IP66, UL Type 3/12/4/4X 12 in. (30.48 cm) operating rod	Black Handle	140M-H	140U-H-RVM12B
		Red/Yellow Handle		140U-H-RVM12R
		Black Handle	140M-J	140U-J-RVM12B
		Red/Yellow Handle		140U-J-RVM12R
		Black Handle	140M-L	140U-L-RVM12B
		Red/Yellow Handle		140U-L-RVM12R
		Black Handle	140M-N	140U-N-RM12B
	Rotary, Variable-Depth Operating Mechanism UL Type 3/12/4/4X, IP 66 Rotary handle 21 in. (53.34 cm) operating rod	Black Handle	140M-H	140U-H-RVM21B
		Red/Yellow Handle		140U-H-RVM21R
		Black Handle	140M-J	140U-J-RVM21B
		Red/Yellow Handle		140U-J-RVM21R
		Black Handle	140M-L	140U-L-RVM21B
		Red/Yellow Handle		140U-L-RVM21R
	Rotary, Variable-Depth Operating Mechanism with Internal NFPA 79 Operating Handle External Type 3/4/4X/12 IP66 Rotary Handle 12 in. (30.48 cm) operating rod	Black Handle	140M-H	140U-H-NVM12B
		Red/Yellow Handle		140U-H-NVM12R
		Black Handle	140M-J	140U-J-NVM12B
		Red/Yellow Handle		140U-J-NVM12R
		Black Handle	140M-L	140U-L-NVM12B
		Red/Yellow Handle		140U-L-NVM12R
	Rotary, Variable-Depth Operating Mechanism with Internal NFPA 79 Operating Handle External Type 3/4/4X/12 IP66 Rotary Handle 21 in. (53.34 cm) operating rod	Black Handle	140M-H	140U-H-NVM21B
		Red/Yellow Handle		140U-H-NVM21R
		Black Handle	140M-J	140U-J-NVM21B
		Red/Yellow Handle		140U-J-NVM21R
		Black Handle	140M-L	140U-L-NVM21B
		Red/Yellow Handle		140U-L-NVM21R

	Description		For Use With	Cat. No.
	Operating Mechanism for External Handles		140M-I	198-H2
	External Operating Handle	Black/Grey Handle IP66 (Type 3/3R/4/4X/12)	140M-I	190-HM4
		Red/Yellow Handle IP66 (Type 3/3R/4/4X/12)		190-HM4E
		Black/Grey Handle IP55 (Type 1)		190-HM1
		Red/Yellow Handle IP55 (Type 1)		190-HM1E
	Extension Shaft Standard length — Enclosure Working Depth Minimum: 8 in. (203 mm) Maximum: 12 in (305 mm)		140M-I	194R-R3
	Extension Shaft Extended length — Enclosure Working Depth Minimum: 8 in. (203 mm) Maximum: 20 in (508 mm)			194R-R4
	Motor Operator Remotely opens, closes, and resets the MPCB or MCP	For use with 3- or 4-Pole MCCBs, 110…240V AC/DC	140M-H	140U-H-EOPD
		For use with 3- or 4-Pole MCCBs, 24V DC		140U-H-EOPZ
		For use with 3- or 4-Pole MCCBs, 110…240V AC/DC	140M-J	140U-J-EOPD
		For use with 3- or 4-Pole MCCBs, 24V DC		140U-J-EOPZ
		For use with 3- or 4-Pole MCCBs, 110…240V AC/DC	140M-L	140U-L-EOPD
		For use with 3- or 4-Pole MCCBs, 24V DC		140U-L-EOPZ
		For use with 3- or 4-Pole MCCBs, 110…240V AC/DC	140M-N	140U-N-EOPD
		For use with 3- or 4-Pole MCCBs, 230…240V AC/DC		140U-N-EOPA
		For use with 3- or 4-Pole MCCBs, 24V DC		140U-N-EOPZ
	Rotary, Direct Couple Operating Mechanism Rotary handle - IP42 UL Type 1 Breaker mounted	Black Handle	140M-H	140U-H-RCB
		Black Handle		140U-H-RCB
		Black Handle	140M-I	140U-I-RCB
		Red/Yellow Handle		140U-I-RCR
		Black Handle	140M-J	140U-J-RCB
		Red/Yellow Handle		140U-J-RCR
		For use with 3- or 4-Pole MCCBs	140M-L	140U-L-RMX
	End Cap Kit Provides three-phase connections for terminal or bolt-on connections Metric hardware provided		140M-H	140U-H-ECM
			140M-I	140U-I-ECM
			140M-J	140U-J-ECM
			140M-L	140U-L-ECM
	Padlock Kit Padlocking hasp Lock-OFF only		140M-H	140U-H-PL
			140M-I	140U-I-PL
			140M-J	140U-J-PL
			140M-N	140U-N-PL
	DIN Rail Adapter Allows H-frame MCCB to mount to 35 mm DIN Rail		140M-H	140U-H-DRA
	Phase Barriers Provides additional phase clearance when special connections that extend past the circuit breaker housing are required	Qty: 2	140M-H	140U-H-PB
			140M-I	140U-I-PB
			140M-J	140U-J-PB
			140M-L	140U-K-PB
			140M-N	140U-N-PB
	Plug-in Base Adapters Plug-in provides power terminations and adapter for applications where the ability to quickly remove or replace the circuit breakers is required		140M-H	140U-H-PAD3
	Plug-in Base Auxiliary Contacts Provides auxiliary contact functions to detect breaker installation status		140M-H	140U-H-PDK
	Replacement Mounting Hardware	(4) M4 - 0.7 x 75 mm	140M-H	140U-H-MHM
	Replacement Mounting Hardware	(4) M4 - 0.7 x 90 mm	140M-J	140U-J-MHM
	Replacement Mounting Hardware	(4) M5 - 0.8 x 100 mm	140M-L	140U-L-MHM
	Replacement Mounting Hardware	(4) M8 - 1 x 35 mm	140M-N	140U-N-MHM

Terminal Lugs

	Description			Frame Size	Cat. No.
	Terminal Lugs	Steel Terminal Copper/Aluminum wire #4-4/0 AWG	Qty: 3	I	140U-I-TLS1
		Stainless Steel Terminal Copper/Aluminum wire #4-4/0 AWG	Qty: 3	I	140U-I-TLS2
	Terminal Lugs	Aluminum lugs, Al or Cu wire (1) 4…350 MCM or (1) 25…185 mm2	Qty: 1	J	140U-J-TLA1
		Stainless Steel Box Lugs, Cu wire Only (1) 4…350 MCM or (1) 25…185 mm2	Qty: 1	J	140U-J-TLS1
	Terminal Lugs	Aluminum lug, Al or Cu wire (1) 2…500 MCM or (1) 35…240 mm2	Qty: 1	L	140U-L-TL4A1
		Copper lug, Cu wire only (1) 2…500 MCM or (1) 35…240 mm2	Qty: 1		140U-L-TL4C1
		Aluminum lug, Al or Cu wire (1) 500…750 MCM or (1) 240…380 mm2	Qty: 3 (includes shield)		140U-L-TL6A1
		Copper lug, Cu wire only (1) 500…750 MCM or (1) 240…380 mm2	Qty: 3 (includes shield)		140U-L-TL6C1
	Terminal Lugs	Aluminum lug, Al or Cu wire (2) 2…500 MCM or (2) 35…240 mm2	Qty: 3 (includes shield)	L	140U-L-TL6A2
		Copper lug, Cu wire only (2) 2…500 MCM or (2) 35…240 mm2	Qty: 3 (includes shield)		140U-L-TL6C2

Terminal Lugs, Continued

	Description			Frame Size	Cat. No.
	Terminal Lugs	Aluminum lug, Al or Cu wire (2) 1…500 MCM or (2) 50…240 mm2	Qty: 1	N	140U-N-TLA2
		Aluminum lug, Al or Cu wire (3) 3/0…400 MCM or (3) 95…185 mm2	Qty: 1	N	140U-N-TLA3
		Aluminum lug, Al or Cu wire (4) 4/0…500 MCM or (4) 120…300 mm2	Qty: 1	N	140U-N-TLA4
		Aluminum lug, Al or Cu wire (3) 500…750 MCM or (3) 300…400 mm2	Qty: 1	N	140U-N-TLA3A
		Copper lug, Cu wire only (2) 2/0…500 MCM or (2) 70…240 mm2	Qty: 1	N	140U-N-TLC2
		Copper lug, Cu wire only (3) 3/0…500 MCM or (3) 95…240 mm2	Qty: 1		140U-N-TLC3
		Copper lug, Cu wire only (4) 3/0…400 MCM or (4) 95…185 mm2	Qty: 1		140U-N-TLC4

140M Factory Modifications (Open)

Note: For modifications add (option code _) for desired features to cat. no. Available in North America only.

f
Miscellaneous
Code	Description	Frame Size
KN	Black Lockable Knob	C, D, F, CMN
KY	Red/Yellow Lockable Knob	C, D, F, CMN
TE	Spacing Adapter for Self-Protected Starters (Type E)	C, D, F
MT	STD Bus Bar Mount, Top	C, D, F, H, CMN
MU	STD Bus Bar Mount, Universal	J, K, L

g
Aux / Trip Contacts - C, D, F
1st Code	Description	2nd Code	Description
Bottom Front		Right Side
X	Placeholder	X	Placeholder
A	1 N.C.	C	1 N.O. + 1 N.C.
B	1 N.O.	D	2 N.O.
C	1 N.O. + 1 N.C.	E	2 N.C.
D	2 N.O.	K	1 N.C. (SC+OL) + 1 N.C. (SC)
E	2 N.C.	L	1 N.O. (SC+OL) + 1 N.O. (SC)
R	1 N.C. + 1 N.O. (SC+OL)	M	1 N.C. (SC+OL) + 1 N.O. (SC)
S	1 N.O. + 1 N.O. (SC+OL)	N	1 N.O. (SC+OL) + 1 N.C. (SC)
		Q	1 N.O. (SC) + 1 N.C. (SC)

g
Aux / Trip Contacts - CMN
1st Code	Description	2nd Code	Description
Bottom Front		Top Front‡
X	Placeholder	X	Placeholder
C	1 N.O. + 1 N.C.	K	1 N.C. (OL) + 1 N.C. (SC)
D	2 N.O.	L	1 N.O. (OL) + 1 NO (SC)
E	2 N.C.	M	1 N.C. (OL) + 1 N.O. (SC)
		N	1 N.O. (OL) + 1 N.C. (SC)

‡ Cannot be combined with option "h".

g
Aux / Trip Contacts - H, J, L
1st Code	Description	2nd Code	Description
Bottom Front		Right Side
X	Placeholder	X	Placeholder
		C	1 N.O. + 1 N.C.
		RT	1 N.O. + 1 N.C. (Overload Function)
		F¬	2 N.O. + 2 N.C.
		N¬	1 N.O. (SC+OL) + 1 N.C. (SC)
		T¬	1 N.O. + 1 N.C. and 1 N.O. + 1 N.C. (SC+OL)

¬ Only available on MCPs.
T J- and L-Frame MPCB only.

g
Aux / Trip Contacts - I, N
1st Code	Description	2nd Code	Description
Left Side		Right Side
X	Placeholder	X	Placeholder
C	1 N.O. + 1 N.C.	C	1 N.O. + 1 N.C.
F	2 N.O. + 2 N.C.	F¬	2 N.O. + 2 N.C.
N	1 N.O. (SC+OL) + 1 N.C. (SC)	N¬	1 N.O. (SC+OL) + 1 N.C. (SC)
T	1 N.O. + 1 N.C. and 1 N.O. + 1 N.C. (SC+OL)	T¬	1 N.O. + 1 N.C. and 1 N.O. + 1 N.C. (SC+OL)

¬ Only available on MCPs.

140M Factory Modifications (Open), Continued

Note: For modifications add (option code *) for desired features to cat. no. Available in North America only.

h
UV and Shunt Trips - C, D, F
1st Code	Description	2nd Code	Description
Left Side		Voltage
G	Undervoltage Trip	J	24V AC, 60 Hz
P	Shunt Trip	K	24V AC, 50 Hz
		D	120V AC, 60 Hz
		C	110V AC, 50 Hz
		H	208V AC, 60 Hz
		F	220…230V AC, 50 Hz
		A	240V AC, 60 Hz
		T	277V AC, 50 Hz
		N	380…400V AC, 50 Hz
		B	480V AC, 60 Hz and 415V AC, 50 Hz
		VC	600V AC, 60 Hz
		M	575V AC, 60 Hz and 500V AC, 50 Hz
		ZR	9V DC
		ZQ	12V DC
		ZJ	24V DC
		ZW	36V DC
		ZY	48V DC
		ZZ	60V DC
		ZB	64V DC
		ZG	72V DC
		ZE	80V DC

h
UV and Shunt Trips - CMN
1st Code	Description	2nd Code	Description
Top Front‡		Voltage
G	Undervoltage Trip	KJ	24V AC, 60 Hz and 24V AC, 50 Hz
P	Shunt Trip	D	120V AC, 60 Hz and 110V AC, 50 Hz
		A	240V AC, 60 Hz and 220…230V AC, 50 Hz
‡ Cannot be combined with option "g".

h
UV and Shunt Trips - H, J, L
1st Code	Description	2nd Code	Description
Left Front		UV Voltage
G	Undervoltage Trip	J	24V AC/DC
		D	110…127V AC
		A	208…240V AC
		B	380…500V AC
		C	525…600V AC
Left Front		Shunt Voltage
P	Shunt Trip	J	12…60V AC/DC
		D	110…240V AC/DC
		B	380…600V AC

h
UV and Shunt Trips - I
1st Code	Description	2nd Code	Description
Left Front		UV Voltage
G	Undervoltage Trip	J	24V AC
		D	110…127V AC
		A	208…240V AC
		B	380…480V AC
Left Front		Shunt Voltage
P	Shunt Trip	J	12…24V AC/DC
		D	48…127V AC and 48…60V DC
		N	208…380V AC and 110…127V DC
		B	415…600V AC and 220…250V DC

h
UV and Shunt Trips - N
1st Code	Description	2nd Code	Description
Left Front		UV Voltage
G	Undervoltage Trip	J	24V AC
		D	110…127V AC
		A	208…240V AC
		B	380…480V AC
Left Front		Shunt Voltage
P	Shunt Trip	J	12…24V AC/DC
		D	110…240V AC and 110…125V DC
		N	380…440V AC and 220…250V DC
		B	480…600V AC