Bulletin 140U J-Frame

Product Selection — 250 A, J-Frame

• UL 489
  
• CSA 22.2, No. 5
  
• IEC 60947-2
  
• CE
  
• KEMA
  CCC (Pending)

Note: Terminal box lugs must be ordered separately. See Terminal Lugs

Breaker Frames

Rated Current In [A]	Breaking Capacity (50 Hz) Icu /Ics [kA]								Interrupting Rating (60 Hz) [kA]			Cat. No.
	220…240V		380…415V		525V		690V		240V	480V	600V
250	65	65	25	25	18	12	12	6	65	25	18	140U-J2X3
	85	85	45	45	18	12	12	6	85	35	18	140U-J3X3
	100	100	70	70	25	13	14	7	100	65	25	§	140U-J6X3
	200	200	100	100	35	18	16	12	200	100	35	§	140U-J0X3
§ Current limiting

Trip Units

Thermal-Magnetic
Rated Current In [A]	Adjustment Range [A]		Cat. No.
	Thermal Trip Ir = In (Fixed)	Magnetic Trip Im = 5…10 x Ir
90	90	450…900	140U-JTD3-C90
100	100	500…1000	140U-JTD3-D10
125	125	600…1250	140U-JTD3-D12
150	150	750…1500	140U-JTD3-D15
175	175	875…1750	140U-JTD3-D17
200	200	1000…2000	140U-JTD3-D20
225	225	1125…2250	140U-JTD3-D22
250	250	1250…2500	140U-JTD3-D25

Electronic
Rated Current In [A]	Adjustment Range [A]		Protection Type	Cat. No.
	Thermal Trip Ir = 0.4…1.0 x In	Magnetic Trip Im = 2…14 x Ir
50	20…50	40…700	LS	140U-JTL3-C50
50	20…50	40…700	LSI	140U-JTH3-C50
50	20…50	40…700	LSG	140U-JTG3-C50
50	20…50	40…700	LSIG	140U-JTI3-C50
100	40…100	80…1400	LS	140U-JTL3-D10
100	40…100	80…1400	LSI	140U-JTH3-D10
100	40…100	80…1400	LSG	140U-JTG3-D10
100	40…100	80…1400	LSIG	140U-JTI3-D10
160	63…160	126…2240	LS	140U-JTL3-D16
160	63…160	126…2240	LSI	140U-JTH3-D16
160	63…160	126…2240	LSG	140U-JTG3-D16
160	63…160	126…2240	LSIG	140U-JTI3-D16
250	100…250	200…3500	LS	140U-JTL3-D25
250	100…250	200…3500	LSI	140U-JTH3-D25
250	100…250	200…3500	LSG	140U-JTG3-D25
250	100…250	200…3500	LSIG	140U-JTI3-D25

Assembled Circuit Breakers with Thermal-Magnetic Trip Units

Rated Current In [A]	Breaking Capacity/ Interrupting Rating [kA]‡		Cat. No.	Breaking Capacity/ Interrupting Rating [kA]‡		Cat. No.	Breaking Capacity/ Interrupting Rating [kA]‡		Cat. No.
	400V	480V		400V	480V		400V	480V
90	25	25	140U-J2D3-C90	40	35	140U-J3D3-C90	70	65	140U-J6D3-C90
100	25	25	140U-J2D3-D10	40	35	140U-J3D3-D10	70	65	140U-J6D3-D10
125	25	25	140U-J2D3-D12	40	35	140U-J3D3-D12	70	65	140U-J6D3-D12
150	25	25	140U-J2D3-D15	40	35	140U-J3D3-D15	70	65	140U-J6D3-D15
175	25	25	140U-J2D3-D17	40	35	140U-J3D3-D17	70	65	140U-J6D3-D17
200	25	25	140U-J2D3-D20	40	35	140U-J3D3-D20	70	65	140U-J6D3-D20
225	25	25	140U-J2D3-D22	40	35	140U-J3D3-D22	70	65	140U-J6D3-D22
250	25	25	140U-J2D3-D25	40	35	140U-J3D3-D25	70	65	140U-J6D3-D25
‡ Interrupting ratings shown are for 400V and 480V, respectively. The complete range of ratings can be found in the frame rating table on Breaker Frames.

Assembled Circuit Breakers with Electronic Trip Units

Rated Current In [A]	Protection Type	Breaking Capacity/ Interrupting Rating [kA]‡		Cat. No.	Breaking Capacity/ Interrupting Rating [kA]‡		Cat. No.	Breaking Capacity/ Interrupting Rating [kA]‡		Cat. No.
		400V	480V		400V	480V		400V	480V
50	LS	25	25	140U-J2L3-C50	40	35	140U-J3L3-C50	70	65	140U-J6L3-C50
50	LSI	25	25	140U-J2H3-C50	40	35	140U-J3H3-C50	70	65	140U-J6H3-C50
50	LSG	25	25	140U-J2G3-C50	40	35	140U-J3G3-C50	70	65	140U-J6G3-C50
50	LSIG	25	25	140U-J2I3-C50	40	35	140U-J3I3-C50	70	65	140U-J6I3-C50
100	LS	25	25	140U-J2L3-D10	40	35	140U-J3L3-D10	70	65	140U-J6L3-D10
100	LSI	25	25	140U-J2H3-D10	40	35	140U-J3H3-D10	70	65	140U-J6H3-D10
100	LSG	25	25	140U-J2G3-D10	40	35	140U-J3G3-D10	70	65	140U-J6G3-D10
100	LSIG	25	25	140U-J2I3-D10	40	35	140U-J3I3-D10	70	65	140U-J6I3-D10
160	LS	25	25	140U-J2L3-D16	40	35	140U-J3L3-D16	70	65	140U-J6L3-D16
160	LSI	25	25	140U-J2H3-D16	40	35	140U-J3H3-D16	70	65	140U-J6H3-D16
160	LSG	25	25	140U-J2G3-D16	40	35	140U-J3G3-D16	70	65	140U-J6G3-D16
160	LSIG	25	25	140U-J2I3-D16	40	35	140U-J3I3-D16	70	65	140U-J6I3-D16
250	LS	25	25	140U-J2L3-D25	40	35	140U-J3L3-D25	70	65	140U-J6L3-D25
250	LSI	25	25	140U-J2H3-D25	40	35	140U-J3H3-D25	70	65	140U-J6H3-D25
250	LSI	25	25	140U-J2G3-D25	40	35	140U-J3H3-D25	70	65	140U-J6G3-D25
250	LSIG	25	25	140U-J2I3-D25	40	35	140U-J3I3-D25	70	65	140U-J6I3-D25
‡ Interrupting ratings shown are for 400V and 480V, respectively. The complete range of ratings can be found in the frame rating table on Breaker Frames.

Molded Case Switch — UL 489

Rated Current In [A]	Thermal Trip Ir = In [A]	Magnetic Trip [A] Im = 10 x In	Breaking Capacity (50 Hz) Icu /Ics [kA]								Interrupting Rating (60 Hz) [kA]			Cat. No.
			220…240V		380…415V		500V		690V		240V	480V	600V
250	—	2500	100	100	70	70	42	20	7	3	100	65	25	140U-J6S3-D25

Accessories — 250 A, J-Frame

Pictures shown are representative. Actual product may differ from product shown.

Internal Control Modules — Field Installed

	Description		Diagram	Mounting Location	Cat. No.
	Auxiliary Contact (AX) Electrically indicates "ON/OFF" status of breakers	(1) 1a-1b			140U-H-EA1
		(2) 1a-1b		Right side ONLY	140U-H-EA2
	Alarm Contact (AL) Electrically indicates when the breaker is in the "TRIPPED" state	(1) 1M (make)-1B (break)			140U-J-ER1
				Right side ONLY
	Auxiliary/Alarm Contact (AX/AL) Combination Combination of auxiliary contact and alarm contact	(1) 1a-1b (1) 1M (make)-1B (break)			140U-J-EA1R1
				Right side ONLY
	Shunt Trip (SNT) Provides remote tripping of the circuit breaker Undervoltage trip not available when shunt trip is used	12V DC			140U-H-SNZQ
		24…60 V, 50/60/DC			140U-H-SNJ
		110…240V, 50/60/DC			140U-H-SND
		380…600V, 50/60 Hz		Left side ONLY	140U-H-SNB
	Undervoltage Release (UVT) Automatically trips breaker when voltage falls between preset value, 35…70% Shunt trip is not available when undervoltage release is used	24V, 50/60 Hz			140U-H-UJ
		110…127V, 50/60 Hz			140U-H-UD
		208…240V, 50/60 Hz			140U-H-UA
		380…500V, 50/60 Hz			140U-H-UB
		525…600V, 50/60 Hz		Left side ONLY	140U-H-UC

Note: For Factory-Installed internal control modules, please see Internal Control Modules — Factory Installed
For use with H-, J-, K-, L-, M-, and N-Frame Molded Case Circuit Breakers.

Terminal Lugs

	Description			Frame Size	Cat. No.
	Terminal Lugs	Aluminum lugs, Al or Cu wire (1) 4…350 MCM or (1) 25…185 mm2	Qty: 1	J	140U-J-TLA1
		Stainless steel box lugs, Cu wire only (1) 4…350 MCM or (1) 25…185 mm2	Qty: 1	J	140U-J-TLS1
Cat. No. 140U-J-TLS1

Pictures shown are representative. Actual product may differ from product shown.

External Accessories

	Description			Cat. No.
	Terminal Shields IP20 Ingress Protection Rating			140U-J-TS
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted Non-Metallic - UL IP66, Type 1/3/12/4/4X Flange Mount Operating Handle		3 ft (0.9 m) Cable	140U-J-FCX03
			4 ft (1.3 m) Cable	140U-J-FCX04
			6 ft (1.9 m) Cable	140U-J-FCX06
			10 ft (3.0 m) Cable	140U-J-FCX10
	Flex-Cable Operating Mechanism Stainless Steel IP66/ UL Type 1/3/12/4/4X Flange-Mount Operating Handle		3 ft (0.9 m) Cable	140U-J-FCS03
			4 ft (1.2 m) Cable	140U-J-FCS04
			6 ft (1.9 m) Cable	140U-J-FCS06
			10 ft (3.0 m) Cable	140U-J-FCS10
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted Painted metal — Type 1/12 Flange mount operating handle		3 ft (0.9 m) Cable	140U-J-FMX03
			4 ft (1.2 m) Cable	140U-J-FMX04
			6 ft (1.9 m) Cable	140U-J-FMX06
			10 ft (3.0 m) Cable	140U-J-FMX10
	Rotary, Variable-Depth Operating Mechanism UL Type 3/12/4/4X, IP 66 Rotary handle 12 in. (30.48 cm) operating rod		Black Handle	140U-J-RVM12B
			Red/Yellow Handle	140U-J-RVM12R
	Rotary, Variable-Depth Operating Mechanism UL Type 3/12/4/4X, IP 66 Rotary handle 21 in. (53.34 cm) operating rod		Black Handle	140U-J-RVM21B
			Red/Yellow Handle	140U-J-RVM21R
	Rotary, Variable-Depth Operating Mechanism with Internal NFPA 79 Operating Handle External Type 3/4/4X/12 IP66 Rotary Handle 12 in. (30.48 cm) operating rod		Black Handle	140U-J-NVM12B
			Red/Yellow Handle	140U-J-NVM12R
	Rotary, Variable-Depth Operating Mechanism with Internal NFPA 79 Operating Handle External Type 3/4/4X/12 IP66 Rotary Handle 21 in. (53.34 cm) operating rod		Black Handle	140U-J-NVM21B
			Red/Yellow Handle	140U-J-NVM21R
	Rotary, Direct Couple Operating Mechanism Breaker mounted		Black Handle	140U-J-RCB
			Red/Yellow Handle	140U-J-RCR
	End Cap Kit Provides 3-phase connections for terminal or bolt-on connections Metric hardware			140U-J-ECM
	Phase Barriers Provides additional phase clearance when special connections that extend past the circuit breaker housing are required		Qty: 2	140U-J-PB
	Padlock Kit Padlocking hasp Lock-OFF only		Qty: 1	140U-J-PL
	Multi-Tap Terminal Lug Kit — with IP20 terminal cover	(3) #14…2 AWG or (3) 2.5…25 mm2	Qty: 3	140U-J-MTL3A
		(6) #14…6 AWG or (6) 2.5…10 mm2	Qty: 3	140U-J-MTL6A
	Ground Fault Leakage Module Current pickup settings are selectable from 0.03…10 A with time delays up to. Time delays are also selectable from Instantaneous…1.0 s for 0.10 A settings and above. A current pickup setting of 0.03 A defaults to an Instantaneous time setting regardless of the time dial’s position. Two alarm contacts come as standard: a 50% pretrip and a 100% after trip contact, both based only on earth leakage current levels.	150 A	For use with J-Frame 3-pole MCCBs up to 150 A	140U-J-GFP1503
		250 A	For use with J-Frame 3-pole MCCBs up to 250 A	140U-J-GFP2503
	Motor Operator Remotely opens, closes, and resets the circuit breaker 110…240V AC		For use with 3- or 4-pole MCCBs, 110…240V AC/DC	140U-J-EOPD
			For use with 3- or 4-pole MCCBs, 24V DC	140U-J-EOPZ
	Replacement Mounting Hardware (4) M4 - 0.7 x 90 mm ♣		For use with 3- or 4-pole MCCBs	140U-J-MHM
♣ Supplied with breaker.

Approximate Dimensions — 250 A, J-Frame

Dimensions are in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.



J-Frame with Earth Leakage Module