Molded Case Circuit Breakers

Catalogs > Industrial Controls Catalog > Motor Control, IEC > Molded Case Circuit Breakers > Bulletin 140U L-Frame

Bulletin 140U L-Frame

Accessories — 600 A, L-Frame

Internal Control Modules — Field Installed

	Description		Diagram	Mounting Location	Cat. No.
	Auxiliary Contact (AX) Electrically indicates "ON/OFF" status of breakers	(1) 1a-1b			140U-H-EA1
		(2) 1a-1b		Left AND Right side	140U-H-EA2
	Alarm Contact (AL) Electrically indicates when the breaker is in the "TRIPPED" state	(1) 1M (make)-1B (break)			140U-J-ER1
				Right side ONLY
	Auxiliary/Alarm Contact (AX/AL) Combination Combination of auxiliary contact and alarm contact	(1) 1a-1b (1) 1M (make)-1B (break)			140U-J-EA1R1
				Right side ONLY
	Shunt Trip (SNT) Provides remote tripping of the circuit breaker Undervoltage trip not available when shunt trip is used	24…60 V, 50/60/DC			140U-H-SNJ
		110…240V, 50/60/DC			140U-H-SND
		380…600V, 50/60 Hz		Left side ONLY	140U-H-SNB
	Undervoltage Release (UVT) Automatically trips breaker when voltage falls between preset value, 35…70% Shunt trip is not available when undervoltage release is used	24V, 50/60 Hz			140U-H-UJ
		110…127V, 50/60 Hz			140U-H-UD
		208…240V, 50/60 Hz			140U-H-UA
		380…500V, 50/60 Hz			140U-H-UB
		525…600V, 50/60 Hz		Left side ONLY	140U-H-UC

Note: For Factory-Installed internal control modules, please see Internal Control Modules — Factory Installed

For use with H-, J-, K-, L-, M-, and N-Frame Molded Case Circuit Breakers

External Accessories

	Description			Cat. No.
	Terminal Shields IP20 Ingress Protection Rating			140U-L-TS
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted UL Type 1/3/12/4/4X Flange-Mount Operating Handle Non-Metallic		4 ft (1.3 m) Cable	140U-L-FCX04
			6 ft (1.9 m) Cable	140U-L-FCX06
			10 ft (3.0 m) Cable	140U-L-FCX10
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted UL Type 4/4X Flange-Mount Operating Handle Stainless Steel		4 ft (1.2 m) Cable	140U-L-FCS04
			6 ft (1.9 m) Cable	140U-L-FCS06
			10 ft (3.0 m) Cable	140U-L-FCS10
	Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted Painted metal — Type 1/12 Flange mount operating handle		4 ft (1.2 m) Cable	140U-L-FMX04
			6 ft (1.9 m) Cable	140U-L-FMX06
			10 ft (3.0 m) Cable	140U-L-FMX10
	Rotary, Variable-Depth Operating Mechanism UL Type 3/12/4/4X, IP 66 Rotary handle 12 in. (30.48 cm) operating rod		Black Handle	140U-L-RVM12B
			Red/Yellow Handle	140U-L-RVM12R
	Rotary, Variable-Depth Operating Mechanism UL Type 3/12/4/4X, IP 66 Rotary handle 21 in. (53.34 cm) operating rod		Black Handle	140U-L-RVM21B
			Red/Yellow Handle	140U-L-RVM21R
	Rotary, Variable-Depth Operating Mechanism with Internal NFPA79 Operating Handle External UL Type 3/12/4/4X, IP 66 Rotary Handle 12 in. (30.48 cm) operating rod		Black Handle	140U-L-NVM12B
			Red/Yellow Handle	140U-L-NVM12R
	Rotary, Variable-Depth Operating Mechanism with Internal NFPA79 Operating Handle External UL Type 3/12/4/4X, IP 66 Rotary Handle 21 in. (53.34 cm) operating rod		Black Handle	140U-L-NVM21B
			Red/Yellow Handle	140U-L-NVM21R
	Rotary, Direct Couple Operating Mechanism Breaker Mounted		Black Handle	140U-L-RMX
	End Cap Kit Provides 3-phase connections for terminal or bolt-on connections Metric hardware provided		Qty: 1	140U-L-ECM
	Phase Barriers Provides additional phase clearance when special connections that extend past the circuit breaker housing are required		Qty: 2	140U-K-PB
	Ground Fault Leakage Module Current pickup settings are selectable from 0.03…30 A with time delays up to1.0 s. Time delays are also selectable from Instantaneous…1.0 s for 0.10 A settings and above. A current pickup setting of 0.03 A defaults to an Instantaneous time setting regardless of the time dial’s position. Two alarm contacts come as standard: a 50% pretrip and a 100% after trip contact, both based only on earth leakage current levels.	400 A	For use with L-Frame 3-pole MCCBs up to 400 A	140U-L-GFP4003
		600 A	For use with L-Frame 3-pole MCCBs up to 600 A	140U-L-GFP6003
	Motor Operator Remotely opens, closes, and resets the circuit breaker 110…240V AC		For use with 3- or 4-Pole MCCBs, 110…240V AC/DC	140U-L-EOPD
			For use with 3- or 4-Pole MCCBs, 24V DC	140U-L-EOPZ
	Replacement Mounting Hardware (4) M5 - 0.8 x 100 mm §		For use with 3- or 4-Pole MCCBs	140U-L-MHM
§ Supplied with breaker.