Catalogs > Industrial Controls Catalog > Motor Control, IEC > Molded Case Circuit Breakers > Bulletin 140UE H-Frame
Bulletin 140UE H-Frame
Accessories
Internal Control Modules — Field Installed
| Description | Mounting Location | Diagram | Cat. No. | ||
|
Auxiliary Contact (AX) Electrically indicates "ON/OFF" status of breakers |
(1) 1a-1b |
|
|
140U-H-EA1 |
| (2) 1a-1b | Right Side Only | 140U-H-EA2 | |||
| Alarm Contact (AL) Electrically indicates when the breaker is in the "TRIPPED" state |
(1) 1M (make)-1B (break) |
|
|
140U-H-ER1 | |
| Right Side Only | |||||
|
Auxiliary/Alarm Contact (AX/AL) Combination Combination of auxiliary contact and alarm contact |
(1) 1a-1b (1) 1M (make)-1B (break) |
|
|
140U-H-EA1R1 |
| Right Side Only | |||||
|
Shunt Trip (SNT) Provides remote tripping of the circuit breaker Undervoltage trip not available when shunt trip is used |
24…60 V, 50/60/DC |
|
|
140U-H-SNJ |
| 110…240V, 50/60/DC | 140U-H-SND | ||||
| 380…600V, 50/60 Hz | Left Side Only | 140U-H-SNB | |||
| Undervoltage Release (UVT) Automatically trips breaker when voltage falls between preset value, 35…70% Shunt trip is not available when undervoltage release is used |
24V, 50/60Hz AC; 24V DC |
|
|
140U-H-UJ | |
| 110…127V, 50/60 Hz | 140U-H-UD | ||||
| 208…240V, 50/60 Hz | 140U-H-UA | ||||
| 380…500V, 50/60 Hz | 140U-H-UB | ||||
| 525…600V, 50/60 Hz | Left Side Only | 140U-H-UC | |||
Internal Control Modules — Factory Installed
Left side only
Mounting Location
Right side only
|
| Auxiliary and Alarm Contacts |
Suffix |
| (1) AX | - A |
| (2) AX | - B |
| (1) AL | - D |
| (1) AX + (1) AL | - F |
| Shunt Trip Combinations |
Suffix | ||
| (1) SNT only | - PÄ | ||
| (1) AX + (1) SNT | - QÄ | ||
| (2) AX + (1) SNT | - RÄ | ||
| (1) AX + (1) AL + (1) SNT | - TÄ | ||
| (1) AL + (1) SNT | - VÄ | ||
| ÄStandard Voltage Suffix Codes¬ | |||
| Voltage [V] | 24…60 | 110…240 | 380…600 |
| AC, 50/60 Hz |
J | D | B |
| DC | J | D | — |
| Undervoltage Release Combinations | Suffix | ||||
| (1) UVT only | - GÄ | ||||
| (1) AX + (1) UVT | - HÄ | ||||
| (2) AX + (1) UVT | - JÄ | ||||
| (1) AX + (1) AL + (1) UVT | - LÄ | ||||
| (1) AL + (1) UVT | - NÄ | ||||
| ÄStandard Voltage Suffix Codes¬ | |||||
| Voltage [V] | 24 | 110…127 | 208…240 | 380…500 | 525…600 |
| AC, 50/60 Hz |
J | D | A | B | C |
| DC | J | — | — | — | — |
¬ For additional voltages, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
External Accessories
| Description | For Use With | Cat. No. | |||
|
Terminal End Cover 6.4 mm (0.25 in.) diameter cable entry |
Qty: 1 | 3-Pole MCCBs | 140U-H-TC2 | |
| Terminal End Cover 10.4 mm (0.41 in.) diameter cable entry |
3-Pole MCCBs | 140U-H-TC4 | |||
|
Terminal Shields IP20 Ingress Protection Rating |
Qty: 1 | 3-Pole MCCBs | 140U-H-TS | |
| Qty: 1 | 4-Pole MCCBs | 140U-H-TS4 | |||
|
Rotary, Variable-Depth Operating Mechanism Rotary handle - IP66, UL Type 3/12/4/4X 21 in. (53.34 cm) operating rod |
Black Handle 12 in. (30.5 cm)Shaft |
3- or 4-Pole MCCBs | 140U-H-RVM12B | |
| Red/Yellow Handle 12 in. (30.5 cm)Shaft |
140U-H-RVM12R | ||||
| Black Handle 21 in. (53.4 cm)Shaft |
140U-H-RVM21B | ||||
| Red/Yellow Handle 21 in. (53.4 cm)Shaft |
140U-H-RVM21R | ||||
|
Flex-Cable Operating Mechanism Includes handle, cable, operating, and bail mechanism Pre-assembled and adjusted Non-Metallic - UL IP66, Type 1/3/12/4/4X Flange Mount Operating Handle |
1.5 ft (0.46 m) Cable | 3-Pole MCCBs | 140U-H-FCX01 | |
| 3 ft (0.9 m) Cable | 140U-H-FCX03 | ||||
| 4 ft (1.3 m) Cable | 140U-H-FCX04 | ||||
| 6 ft (1.8 m) Cable | 140U-H-FCX06 | ||||
| 10 ft (3.0 m) Cable | 140U-H-FCX10 | ||||
|
Rotary, Direct Couple Operating Mechanism Rotary handle - IP42 UL Type 1 Breaker mounted |
Black Handle | 3- or 4-Pole MCCBs | 140U-H-RCB | |
| Red/Yellow Handle | 140U-H-RCR | ||||
|
End Cap Kit Provides three-phase connections for terminal or bolt-on connections Metric hardware provided |
Qty: 1 | 3-Pole MCCBs | 140U-H-ECM | |
| Qty: 1 | 4-Pole MCCBs | 140U-H-ECM4 | |||
|
Multi-Tap Terminal Lugs | (3) #14…2 AWG or (3) 2.5…35 mm2 |
Qty: 3 | 3-Pole MCCBs | 140U-H-MTL3AN |
| (6) #14…6 AWG or (6) 2.5…10 mm2 |
Qty: 3 | 3-Pole MCCBs | 140U-H-MTL6AN | ||
| (3) #14…2 AWG or (3) 2.5…35 mm2 |
Qty: 3 with terminal shield | 3-Pole MCCBs | 140U-H-MTL3A | ||
| (6) #14…6 AWG or (6) 2.5…10 mm2 |
Qty: 3 with terminal shield | 3-Pole MCCBs | 140U-H-MTL6A | ||
| Cat. No. 140U-H-MTL3AN | (3) #14…2 AWG or (3) 2.5…35 mm2 |
Qty: 4 | 4-Pole MCCBs | 140U-H-MTL3A4 | |
| (6) #14…6 AWG or (6) 2.5…10 mm2 |
Qty: 4 | 4-Pole MCCBs | 140U-H-MTL6A4 | ||
External Accessories, Continued
| Description | For Use With | Cat. No. | ||
|
Phase Barriers Provides additional phase clearance when special connections that extend past the circuit breaker housing are required |
Qty: 2 | 3-Pole MCCBs | 140U-H-PB |
| Qty: 3 | 4-Pole MCCBs | 140U-H-PB4 | ||
|
Padlock Kit Padlocking hasp Lock-OFF only |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-H-PL |
|
DIN Rail Adapter Allows H-frame MCCB to mount to 35 mm DIN Rail |
Qty: 1 | 3-Pole H-Frame MCCBs | 140U-H-DRA |
|
Plug-in Base Adapters Plug-in provides power terminations and adapter for applications where the ability to quickly remove or replace the circuit breakers is required |
Qty: 1 | 3-Pole MCCBs | 140U-H-PAD3 |
| 4-Pole MCCBs | 140U-H-PAD4 | |||
| Plug-in Base Auxiliary Contacts Provides auxiliary contact functions to detect breaker installation status |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-H-PDK | |
|
Replacement Mounting Hardware (4) M4 - 0.7 x 75 mm |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-H-MHM |
|
Motor Operator Remotely opens, closes, and resets the circuit breaker 110…240V AC |
Qty: 1 | 3- or 4-Pole MCCBs, 110…240V AC/DC | 140U-H-EOPD |
| 3- or 4-Pole MCCBs, 24V DC | 140U-H-EOPZ | |||
|
Slide Bar Interlock | Qty: 1 | — | 140U-H-SBLK |