Catalogs > Industrial Controls Catalog > Motor Control, IEC > Molded Case Circuit Breakers > Bulletin 140UE J-Frame
Bulletin 140UE J-Frame
Accessories
Internal Control Modules — Field Installed
| Description | Mounting Location | Diagram | Cat. No. | ||
|
Auxiliary Contact (AX) Electrically indicates "ON/OFF" status of breakers |
(1) 1a-1b |
|
|
140U-H-EA1 |
| (2) 1a-1b | Left AND Right Side | 140U-H-EA2 | |||
| Alarm Contact (AL) Electronically indicates when the breaker is in the "TRIPPED" state |
(1) 1M (make)-1B (break) |
|
|
140U-J-ER1 | |
| Right Side Only | |||||
|
Auxiliary/Alarm Contact (AX/AL) Combination Combination of auxiliary contact and alarm contact |
(1) 1a-1b (1) 1M (make)-1B (break) |
|
|
140U-J-EA1R1 |
| Left AND Right Side | |||||
|
Shunt Trip (SNT) Provides remote tripping of the circuit breaker Undervoltage trip not available when shunt trip is used |
24…60 V, 50/60/DC |
|
|
140U-H-SNJ |
| 110…240V, 50/60/DC | 140U-H-SND | ||||
| 380…600V, 50/60 Hz | Left Side Only | 140U-H-SNB | |||
| Undervoltage Release (UVT) Automatically trips breaker when voltage falls between preset value, 35…70% Shunt trip is not available when undervoltage release is used |
24V, 50/60Hz AC; 24V DC |
|
|
140U-H-UJ | |
| 110…127V, 50/60 Hz | 140U-H-UD | ||||
| 208…240V, 50/60 Hz | 140U-H-UA | ||||
| 380…500V, 50/60 Hz | 140U-H-UB | ||||
| 525…600V, 50/60 Hz | Left Side Only | 140U-H-UC | |||
Internal Control Modules — Factory Installed
Left side only
Mounting Location
Right side only
|
| Auxiliary and Alarm Contacts |
Suffix |
| (1) AX | - A |
| (2) AX | - B |
| (1) AL | - D |
| (1) AX + (1) AL | - F |
| Shunt Trip Combinations |
Suffix | ||
| (1) SNT only | - PÄ | ||
| (1) AX + (1) SNT | - QÄ | ||
| (2) AX + (1) SNT | - RÄ | ||
| (1) AX + (1) AL + (1) SNT | - TÄ | ||
| (1) AL + (1) SNT | - VÄ | ||
| ÄStandard Voltage Suffix Codes¬ | |||
| Voltage [V] | 24…60 | 110…240 | 380…600 |
| AC, 50/60 Hz |
J | D | B |
| DC | J | D | — |
| Undervoltage Release Combinations | Suffix | ||||
| (1) UVT only | - GÄ | ||||
| (1) AX + (1) UVT | - HÄ | ||||
| (2) AX + (1) UVT | - JÄ | ||||
| (1) AX + (1) AL + (1) UVT | - LÄ | ||||
| (1) AL + (1) UVT | - NÄ | ||||
| ÄStandard Voltage Suffix Codes¬ | |||||
| Voltage [V] | 24 | 110…127 | 208…240 | 380…500 | 525…600 |
| AC, 50/60 Hz |
J | D | A | B | C |
| DC | J | — | — | — | — |
¬ For additional voltages, consult your local Rockwell Automation sales office or Allen-Bradley distributor.
External Accessories
| Description | For Use With | Cat. No. | |||
|
Terminal Shields IP20 Ingress Protection Rating |
Qty: 1 | 3-Pole MCCBs | 140U-J-TS | |
| 4-Pole MCCBs | 140U-J-TS4 | ||||
|
Flex-Cable Operating Mechanism Non-Metallic IP 66/UL Type 1/3/12/4/4X Flange-Mount Operating Handle |
3 ft (0.9 m) Cable | 3- or 4-Pole MCCBs | 140U-J-FCX03 | |
| 4 ft (1.3 m) Cable | 140U-J-FCX04 | ||||
| 6 ft (1.8 m) Cable | 140U-J-FCX06 | ||||
| 10 ft (3.0 m) Cable | 140U-J-FCX10 | ||||
| Flex-Cable Operating Mechanism Stainless Steel IP66/ UL Type 1/3/12/4/4X Flange-Mount Operating Handle |
3 ft (0.9 m) Cable | 3- or 4-Pole MCCBs | 140U-J-FCS03 | ||
| 4 ft (1.3 m) Cable | 140U-J-FCS04 | ||||
| 6 ft (1.8 m) Cable | 140U-J-FCS06 | ||||
| 10 ft (3.0 m) Cable | 140U-J-FCS10 | ||||
|
Rotary, Variable-Depth Operating Mechanism IP66/ UL Type 1/3/12/4/4X rotary handle 12 in. (30.48 cm) operating rod |
Black Handle | 3- or 4-Pole MCCBs | 140U-J-RVM12B | |
| Red/Yellow Handle | 140U-J-RVM12R | ||||
| Rotary, Variable-Depth Operating Mechanism IP66/ UL Type 1/3/12/4/4X rotary handle 21 in. (53.34 cm) operating rod |
Black Handle | 140U-J-RVM21B | |||
| Red/Yellow Handle | 140U-J-RVM21R | ||||
|
Rotary, Direct Couple Operating Mechanism Breaker mounted |
Black Handle | 3- or 4-Pole MCCBs | 140U-J-RCB | |
| Red/Yellow Handle | 140U-J-RCR | ||||
|
Phase Barriers Provides additional phase clearance when special connections that extend past the circuit breaker housing are required |
Qty: 2 | 3-Pole MCCBs | 140U-J-PB | |
| 4-Pole MCCBs | 140U-J-PB4 | ||||
|
Padlock Kit Padlocking hasp Lock-OFF only |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-J-PL | |
|
Terminal Lugs | Stainless Steel Box Lugs, Cu wire Only (1) 4…350 MCM or (1) 25…185 mm2 |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-J-TLS1 |
| Aluminum lugs, Al or Cu wire (1) 4…350 MCM or (1) 25…185 mm2 |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-J-TLA1 | ||
|
End Cap Kit Provides 3-phase connections for terminal or bolt-on connections Metric hardware |
Qty: 1 | 3-Pole MCCBs | 140U-J-ECM | |
| 4-Pole MCCBs | 140U-J-ECM4 | ||||
External Accessories, Continued
| Description | For Use With | Cat. No. | |||
|
Multi-Tap Terminal Lug Kit — with IP20 terminal cover | (3) #14…2 AWG or (3) 2.5…25 mm2 |
Qty: 3 | 3-Pole MCCBs | 140U-J-MTL3A |
| (6) #14…6 AWG or (6) 2.5…10 mm2 |
140U-J-MTL6A | ||||
|
Multi-Tap Terminal Lugs — with IP20 terminal cover | (3) #14…2 AWG or (3) 2.5…25 mm2 |
Qty: 4 | 4-Pole MCCBs | 140U-J-MTL3A4 |
| (6) #14…6 AWG or (6) 2.5…10 mm2 |
140U-J-MTL6A4 | ||||
|
Plug-in Base Adapters Plug-in provides power terminations and adapter |
Qty: 1 | 3-Pole MCCBs | 140U-J-PAD3 | |
| Qty: 1 | 4-Pole MCCBs | 140U-J-PAD4 | |||
| Plug-in Base Auxiliary Contacts Provides auxiliary contact functions to detect breaker insulation status |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-J-PDK | ||
|
Replacement Mounting Hardware (4) M4 - 0.7 x 90 mm |
Qty: 1 | 3- or 4-Pole MCCBs | 140U-J-MHM | |
|
Slide Bar Interlock | Qty: 1 | 3- or 4-Pole MCCBs | 140U-J-SBLK | |
|
Motor Operator Remotely opens, closes, and resets the circuit breaker 110…240V AC |
Qty: 1 | 3- or 4-Pole MCCBs, 110…240V AC/DC | 140U-J-EOPD | |
| 3- or 4-Pole MCCBs, 24V DC | 140U-J-EOPZ | ||||
|
160 A Earth Leakage Module 0.3…10 A, adjustable |
Qty: 1 | 3-Pole MCCBs | 140U-J-ELP1603 | |
| 4-Pole MCCBs | 140U-J-ELP1604 | ||||
| 250 A Earth Leakage Module 0.3…10 A, adjustable |
Qty: 1 | 3-Pole MCCBs | 140U-J-ELP2503 | ||
| 4-Pole MCCBs | 140U-J-ELP2504 | ||||