Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Distributed Starters (Networked) > Bulletin 284 ArmorStart Distributed Motor Controller
Bulletin 284 ArmorStart Distributed Motor Controller
| Introduction |  |
Standards Compliance and Certifications | |
Description | |
Factory-Installed Options | |
Catalog Number Explanation | |
Product Selection | |
| Catalog Number Explanation | |
Product Selection | |
Options — Factory Installed | |
Accessories | |
Specifications | |
Approximate Dimensions | |
DeviceNet Media ∆
| Description | Length [m (ft)] | Cat. No. | |
| Sealed | |||
|
KwikLink pigtail drops are Insulation Displacement Connector (IDC) with integral Class 1 round cables for interfacing devices or power supplies to flat cable | 1 (3.3) | 1485P-P1E4-B1-N5 |
| 2 (6.5) | 1485P-P1E4-B2-N5 | ||
| 3 (9.8) | 1485P-P1E4-B3-N5 | ||
| 6 (19.8) | 1485P-P1E4-B6-N5 | ||
|
DeviceNet Mini- T-Port Tap | Left Keyway | 1485P-P1N5-MN5KM |
| Right Keyway | 1485P-P1N5-MN5NF | ||
| Description | Connector | Cat. No. | |
|
Gray PVC Thin Cable | Mini Straight Female Mini Straight Male |
1485G-P‡ N5-M5 |
| Mini Straight Female Mini Right Angle Male |
1485G-P‡ W5-N5 | ||
| Mini Right Angle Female Mini Straight Male |
1485G-P‡ M5-Z5 | ||
| Mini Right Angle Female Mini Straight Male |
1485G-P‡ W5-Z5 | ||
|
Thick Cable | Mini Straight Female Mini Straight Male |
1485C-P§ N5-M5 |
| Mini Straight Female Mini Right Angle Male |
1485C-P§ W5-N5 | ||
| Mini Right Angle Female Mini Straight Male |
1485C-P§ M5-Z5 | ||
| Mini Right Angle Female Mini Straight Male |
1485C-P§ W5-Z5 | ||
| Description | Length m (ft) | Cat. No. | |
|
DeviceNet Configuration Terminal Used to interface with objects on a DeviceNet network. Includes 1 m communications cable. |
1 (3.3) | 193-DNCT |
| Communication cable, color-coded bare leads | 1 (3.3) | 193-CB1 | |
| Communication cable, microconnector (male) | 1 (3.3) | 193-CM1 | |
| Panel Mount Adapter/Door Mount Bezel Kit | — | 193-DNCT-BZ1 | |
| ∆ See On-Machine Connectivity Catalog for complete cable selection information. | |||
| ‡ Replace symbol with desired length in meters (Example: 1485G-P1N5-M5 for a 1 m cable). Standard cable lengths: 1, 2, 3, 4, 5, and 6 m. | |||
| § Replace symbol with desired length in meters (Example: 1485C-P1N5-M5 for a 1 m cable). Standard cable lengths: 1, 2, 3, 4, 5, 6, 8, 10, 12, 18, 24, and 30 m. | |||
Industrial EtherNet Media∆
| Description | Connector Type | Unshielded |
| Cat. No. | ||
| M12, D-Code Patchcords and Cordsets | ||
|
Straight male to straight male | 1585D-M4TBDM-⋆ |
|
Straight male to right angle male | 1585D-M4TBDE-⋆ |
|
Right angle male to right angle male | 1585D-E4TBDE-⋆ |
|
Straight male to straight female | 1585D-M4TBDF-⋆ |
| Front Mount Receptacle | ||
|
Front mount female to RJ45 | 1585D-D4TBJM-⋆ |
| Transition Cable | ||
|
Straight male to RJ45 | 1585D-M4TBJM-⋆ |
| Description | Conductors | Jacket Material | Cable Type | Jacket Color | Cat. No. |
| RJ45 Patchcords | |||||
|
4-pair | Riser PVC | Unshielded twisted pair | Teal | 1585J-M8PBJM-⋆ |
| High-flex TPE | Teal | 1585J-M8TBJM-⋆ | |||
| M12 to RJ45 Bulkhead Adapter | |||||
|
1585A-DD4JD | ||||
| ⋆ Lengths available in 0.3, 0.6, 1, 2, 5, 10, 15, and additional increments of 5 m, up to 75 m. | |||||
| ∆ See On-Machine Connectivity Catalog for complete cable selection information. | |||||
ArmorPoint® Media ♣
| Description | Length [m (ft)] | Cat. No. |
| ArmorPoint Bus Extension Cable including Terminating Resistor | 1 (3.3) | 280A-EXT1 |
| Extension Cable to connect two ArmorStart Distributed Motor Controllers to ArmorPoint communication protocol | 1 (3.3) | 280A-EXTCABLE |
| ♣ ArmorPoint media is only available with an IP67/NEMA Type 4 rating. | ||
Sensor Media ♠
| DeviceNet/ArmorPoint Communications | |||||
| Description | ArmorStart I/O Connection | Pin Count | Connector | Cat. No. | |
|
DC Micro Patchcord | Input | 4-pin | Straight Female Straight Male |
889D-F4ACDM-♦ |
| Straight Female Right Angle Male |
889D-F4ACDE-♦ | ||||
|
DC Micro V-Cable | Input | 4-pin | Straight Female | 879D-F4ACDM-♦ |
| Right Angle Female | 879D-R4ACM-♦ | ||||
|
AC Micro Patchcord | Output | 3-pin | Straight Female Straight Male |
889R-F3AERM-♦ |
| Straight Female Right Angle Male |
889R-F3AERE-♦ | ||||
| EtherNet/IP Communications | |||||
| Description | ArmorStart I/O Connection | Pin Count | Connector | Cat. No. | |
|
|
DC Micro Patchcord | Input/Output | 4-pin | Straight Female Straight Male |
889D-F4ACDM-♦ |
| Straight Female Right Angle Male |
889D-F4ACDE-♦ | ||||
|
|
DC Micro V-Cable | Input | 4-pin | Straight Female | 879D-F4ACDM-♦ |
| Right Angle Male | 879D-R4ACM-♦ | ||||
| ♠ See On-Machine Connectivity Catalog for complete cable selection information. | |||||
| ♦ Replace symbol with desired length in meters (Example: 889D-F4ACDM-1 for a 1 m cable). Standard cable lengths: 1, 2, 5, and 10 m. | |||||
Motor and Brake Cables
|
||||
| Description | Cable Rating | Length [m (ft)] | Cat. No. | |
| Motor Cable Cordsets | 90° M22 Motor Cordset | IP67/NEMA Type 4 | 3 (9.8) | 280-MTR22-M3 |
| 6 (19.6) | 280-MTR22-M6 | |||
| 10 (32.8) | 280-MTR22-M10 | |||
| 14 (45.9) | 280-MTR22-M14 | |||
| 20 (65.6) | 280-MTR22-M20 | |||
| 90° M35 Motor Cordset | IP67/NEMA Type 4 | 3 (9.8) | 280-MTR35-M3 | |
| 6 (19.6) | 280-MTR35-M6 | |||
| 10 (32.8) | 280-MTR35-M10 | |||
| 14 (45.9) | 280-MTR35-M14 | |||
| 20 (65.6) | 280-MTR35-M20 | |||
| 90° M22 Motor Cordset | IP69K/NEMA 4X | 3 (9.8) | 280S-MTR22-M3 | |
| 6 (19.6) | 280S-MTR22-M6 | |||
| 14 (45.9) | 280S-MTR22-M14 | |||
| 90° M35 Motor Cordset | IP69K/NEMA 4X | 6 (19.6) | 280S-MTR35-M6 | |
| 14 (45.9) | 280S-MTR35-M14 | |||
| Motor Cable Cordsets, High Flex⋆ | 90° M22 Motor Cordset | IP67/NEMA Type 4 | 3 (9.8) | 280-MTRF22-M3 |
| 6 (19.6) | 280-MTRF22-M6 | |||
| 8 (26.2) | 280-MTRF22-M8 | |||
| 10 (32.8) | 280-MTRF22-M10 | |||
| 14 (45.9) | 280-MTRF22-M14 | |||
| 20 (65.6) | 280-MTRF22-M20 | |||
| Motor Cable Cordsets, Shielded (VFD) |
90° M22 Motor Cordset | IP67/NEMA Type 4 | 3 (9.8) | 284-MTRS22-M3 |
| 6 (19.6) | 284-MTRS22-M6 | |||
| 14 (45.9) | 284-MTRS22-M14 | |||
| 90° M22 Motor Cordset | IP69K/NEMA Type 4X | 3 (9.8) | 284S-MTRS22-M3 | |
| 6 (19.6) | 284S-MTRS22-M6 | |||
| 14 (45.9) | 284S-MTRS22-M14 | |||
| Extended Source/Control Brake Cable Cordsets | 90° M25 Source Brake Cable | IP67/NEMA Type 4 | 6 (19.6) | 285-BRC25-M6 |
| 14 (45.9) | 285-BRC25-M14 | |||
| IP69K | 6 (19.6) | 285S-BRC25-M6 | ||
| 14 (45.9) | 285S-BRC25-M14 | |||
| Extended Source/Control Brake Cable Cordsets, High Flex⋆ | 90° M25 Source Brake Cable | IP67/NEMA Type 4 | 3 (9.8) | 285-BRCF25-M3 |
| 6 (19.6) | 285-BRCF25-M6 | |||
| 10 (32.8) | 285-BRCF25-M10 | |||
| 14 (45.9) | 285-BRCF25-M14 | |||
| 20 (65.6) | 285-BRCF25-M20 | |||
| Dynamic Brake Cables | M22 Dynamic Brake Cable (DB Option) | IP67/NEMA Type 4 | 3 (9.8) | 285-DBK22-M3 |
| IP69K | 3 (9.8) | 285S-DBK22-M3 | ||
|
||||
| Description | Description | Cable Rating | Length [m (ft)] | Cat. No. |
| Motor Cable Patchcords | 90° Male/Straight Female M22 | IP67/NEMA Type 4 | 1 (3.3) | 280-MTR22-M1D |
| 3 (9.8) | 280-MTR22-M3D | |||
| 90° Male/Straight Female M35 | IP67/NEMA Type 4 | 1 (3.3) | 280-MTR35-M1D | |
| 3 (9.8) | 280-MTR35-M3D | |||
| 90° Male/Straight Female M22 | IP69K/NEMA Type 4X | 1 (3.3) | 280S-MTR22-M1D | |
| 3 (9.8) | 280S-MTR22-M3D | |||
| 90° Male/Straight Female M35 | IP69K/NEMA Type 4X | 1 (3.3) | 280S-MTR35-M1D | |
| 3 (9.8) | 280S-MTR35-M3D | |||
| Motor Cable Patchcords, Shielded (VFD) | 90° Male/Straight Female M22 | IP67/NEMA Type 4 | 1 (3.3) | 284-MTRS22-M1D |
| 3 (9.8) | 284-MTRS22-M3D | |||
| 90° Male/Straight Female M22 | IP69K/NEMA Type 4X | 1 (3.3) | 284S-MTRS22-M1D | |
| 3 (9.8) | 284S-MTRS22-M3D | |||
| ⋆ 14 million flex cycles, bend radius is maximum 8X the cable diameter (0.362 in. OD). | ||||
Sealing Caps
|
|
| ArmorPoint | DeviceNet | EtherNet/IP | ||||
| Input | Output | Input | Output | Input | Output | |
| Cat. No. | Cat. No. | Cat. No. | Cat. No. | Cat. No. | Cat. No. | |
| Plastic Sealing Cap (M12)⋆ | — | 1485A-M12 | 1485A-M12 | 1485A-M12 | 1485A-M12 | 1485A-M12 |
| AC Micro Aluminum Sealing Cap⋆ | — | 889A-RMCAP | — | 889A-RMCAP | — | — |
| Stainless Steel Sealing Cap§ | — | 889AS-RMCAP | 1485AS-C3 | 889AS-RMCAP | — | — |
| Motor Connector Aluminum Sealing Cap (M22) for 10 A protection⋆ | — | 1485A-C1 | — | 1485A-C1 | — | 1485A-C1 |
| Motor Connector Aluminum Sealing Cap (M35) for 25 A protection⋆ | — | 889A-QMCAP | — | 889A-QMCAP | — | 889A-QMCAP |
| Dynamic Brake Connector (M22) | — | 1485A-C1 | — | 1485A-C1 | — | 1485A-C1 |
| Source/Control Brake Cap (M25) | — | ∆ | — | ∆ | — | ∆ |
| ⋆ To achieve IP67 rating, sealing caps must be installed on all unused I/O connections. | ||||||
| § To achieve IP69K/NEMA 4X rating, sealing caps must be installed on all unused I/O connections. | ||||||
| ∆ Contact your local Rockwell Automation sales office or Allen-Bradley distributor. | ||||||
Handle and Cord Accessories
| Description | Cat. No. | |
|
Locking Tag |
140M-C-M3 |
|
Replacement At-Motor Disconnect Handle Kit includes: (1) handle, (1) guard, and (3) screws |
280-DISHDL |
| Cord grips for ArmorStart devices with 10 A short circuit protection rating | ||
|
3/4 in. Strain relief cord connector and 3/4 in. lock nut Cable range: 0.31…0.56 in. Used with control power media cordset - Example cat. no.: 889N-M65GF-M2 |
Thomas & Betts Cord Grip Cat. No. 2931NM |
| 1 in. Strain relief cord connector and 1 in. lock nut Cable range: 0.31…0.56 in. Used with control power media cordset - Example cat. no.: 280-PWR22G-M |
Thomas & Betts Cord Grip Cat. No. 2940NM | |
| Cord grips for ArmorStart devices with 25 A short circuit protection rating | ||
|
|
3/4 in. Strain relief cord connector and 3/4 in. lock nut Cable range: 0.31…0.56 in. Used with control power media cordset - Example cat. no.: 889N-M65GF-M2 |
Thomas & Betts Cord Grip Cat. No. 2931NM |
| 1 in. Strain relief cord connector and 1 in. lock nut Cable range: 0.70…0.95 in. Used with three-phase power media cordset - Example cat. no.: 280-PWR35G-M1 |
Thomas & Betts Cord Grip Cat. No. 2942NM | |
ArmorStart Bulletin 284 Option DB (IP20) Resistor Installation Dimensions
Dimensions are in millimeters (inches) and weights are in kilograms (pounds). Dimensions are not intended to be used for manufacturing purposes.
|
| Frame | Cat. No. | Weight [kg (lb)] |
| A | AK-R2-091P500, AK-R2-047P500, AK-R2-360P500 | 1.1 (2.5) |
| B | AK-R2-030P1K2, AK-R2-120P1K2 | 2.7 (6) |
Recommended thermostat control wiring to prevent dynamic brake overheating
|
|
|
Peer-to-Peer Communications
|
(ZIP) Zone interlocking Parameters
The Zone Control capabilities of ArmorStart Distributed Motor Controller is ideal for large horsepower (0.5…10 Hp) motored conveyors. The ArmorStart Distributed Motor Controllers have built-in DeviceNet Communications, DeviceLogix technology, and the added Zone Interlocking Parameters (ZIP), which allow one ArmorStart to consume data directly from up to four other DeviceNet nodes without going through the network scanner. These direct communications between conveyor zones are beneficial in a merge, diverter, and accumulation conveyor applications.
ArmorStart to ArmorPoint Connectivity - (Networks other than DeviceNet)
|
When connecting to the Bulletin 1738 ArmorPoint Distributed I/O product, a network adapter and at least one ArmorPoint Digital Output, Digital Input, Analog, AC and Relay product, or Specialty product must be selected. The ArmorPoint Distributed I/O can accomodate up to 63 modules per network node. The cable that connects the ArmorPoint Distributed I/O product to the ArmorStart Distributed Motor Controller is the Cat. No. 280A-EXT1. The Cat. No. 280A-EXT1 includes an ArmorPoint bus extension cable and a network terminating resistor.
Note:Access to DeviceLogix programming is available with RSNetworx for DeviceNet.
|
If an additional ArmorStart Distributed Motor Controller is to be connected, the Cat. No. 280A-EXTCABLE will be required. A maximum of two ArmorStart Distributed Motor Controllers can be connected to the Bulletin 1738 Distributed I/O.
I/O Expansion with DeviceNet
If the I/O capability of the Bulletin 280/281D ArmorStart Distributed Motor Controller needs to be expanded beyond the standard four inputs and two outputs, the ArmorStart Distributed Motor Controller with the DeviceNet communication protocol can be configured to the ADNX Architecture, in which the ArmorStart is part of the DeviceNet subnet, using the Cat. No. 1738-ADNX ArmorPoint Distributed I/O product.
|
Bulletin 1738 ArmorPoint Distributed I/O Products
Digital Output Products
| Description | Cat. No. | |
|
24V DC, eight source output with eight M12 connectors | 1738-OB8EM12 |
| 24V DC, eight source output with eight M8 connectors | 1738-OB8EM8 | |
| 24V DC, four source output with four M12 connectors | 1738-OB4EM12 | |
| 24V DC, four source output with four M8 connectors | 1738-OB4EM8 | |
| 24V DC, two source output with two M12 connectors | 1738-OB2EM12 | |
| 24V DC, two source output, 2 A prot. with two M12 connectors | 1738-OB2EPM12 | |
| 24V DC, four sink output with four M12 connectors | 1738-OV4EM12 | |
Digital Input Products
| Description | Cat. No. | |
|
24V DC, eight sink input with four M12 connectors, two points per connector | 1738-IB8M12 |
| 24V DC, eight sink input with eight M8 connectors | 1738-IB8M8 | |
| 24V DC, eight sink input with one M23 connector | 1738-IB8M23 | |
| 24V DC, four sink input with four M12 connectors | 1738-IB4M12 | |
| 24V DC, four sink input with four M8 connectors | 1738-IB4M8 | |
| 24V DC, two sink input with two M12 connectors | 1738-IB2M12 | |
| 24V DC, four source input with four M12 connectors | 1738-IV4M12 | |
Analog Products
| Description | Cat. No. | |
|
24V DC analog current input with two M12 connectors | 1738-IE2CM12 |
| 24V DC analog voltage input with two M12 connectors | 1738-IE2VM12 | |
| 24V DC analog current output with two M12 connectors | 1738-OE2CM12 | |
| 24V DC analog voltage output with two M12 connectors | 1738-OE2VM12 | |
| 24V DC, two thermocouple input | 1738-IT2IM12 | |
| 24V DC, two RTD input | 1738-IR2M12 | |
Power Supply Products
| Description | Cat. No. | |
|
ArmorPoint I/O Field Potential Distributor Module | 1738-FPD |
| 24V DC Expansion Power Supply | 1738-EP24DC | |
AC and Relay Products
| Description | Cat. No. | |
|
24V DC Coil, N.O. DPST relay with two M12 connectors | 1738-OW4M12 |
| 24V DC Coil, N.O. DPST relay with two AC M12 connectors | 1738-OW4M12AC | |
| 120V AC, two input with two AC 4-pin M12 connectors | 1738-IA2M12AC4 | |
| 120V AC, two input with two AC 3-pin M12 connectors | 1738-IA2M12AC3 | |
| 120/230V AC, two output with two AC 3-pin M12 connectors | 1738-OA2M12AC3 | |
Specialty Products
| Description | Cat. No. | |
|
ArmorPoint I/O RS-232 ASCII Serial Interface Module | 1738-232ASCM12 |
| ArmorPoint I/O RS-485 ASCII Serial Interface Module | 1738-485ASCM12 | |
| 24V DC Very High Speed Counter Module | 1738-VHSC24M23 | |
| ArmorPoint 5V Encoder/Counter Module | 1738-IJM23 | |
| ArmorPoint Synchronous Serial Interface Module with Absolute Encoder | 1738-SSIM23 | |
Adapter Products
| Description | Cat. No. | |
|
ArmorPoint DeviceNet Adapter Module, Drop or Pass-through, with male and female M12 connectors | 1738-ADN12 |
| ArmorPoint DeviceNet Adapter Module, Drop only, with male M18 connector | 1738-ADN18 | |
| ArmorPoint DeviceNet Adapter Module, Drop or Pass-through, with male and female M18 connectors | 1738-ADN18P | |
| ArmorPoint DeviceNet 24V DC Adapter Module with subnet expansion | 1738-ADNX | |
| ArmorPoint Redundant ControlNet Adapter Module | 1738-ACNR | |
| ArmorPoint Ethernet/IP 10/100 Mbps Adapter Module | 1738-AENT | |
| ArmorPoint I/O 2-Port EtherNet/IP Adapter (star, tree, linear, or ring topology)⋆ | 1738-AENTR | |
| ⋆ Requires a 24V DC expansion power unit (cat. no. 1738-EP24DC) when two ArmorStarts are connected to point bus. | ||