Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Distributed Starters (Networked) > Bulletin 280/281 ArmorStart Distributed Motor Controller
Bulletin 280/281 ArmorStart Distributed Motor Controller
| Introduction | Standards Compliance and Certifications | Description | Cat. No. Explanation |
| Product Selection | Options Factory Installed | Specifications | Approximate Dimensions |
Accessories
Sealing Caps
| Description | For Use With | Cat. No. |
| Plastic Sealing Cap (M12)¬ | Input I/O Connection | 1485A-M12 |
| AC Micro Aluminum Sealing Cap - External¬ | Output I/O Connection | 889A-RMCAP |
| Stainless Steel Sealing Cap (M12)T | Input I/O Connection | 1485AS-C3 |
| Stainless Steel Sealing Cap (M12)T | Output I/O Connection | 889AS-RMCAP |
| ¬ To achieve IP67 rating, sealing caps must be installed on all unused I/O connections. | ||
| T To achieve IP69K/NEMA 4X rating, sealing caps must be installed on all unused I/O connections. | ||
Cables
| Description | Cable Rating | Length m (ft) | Cat. No. |
| Extended Motor Cable Cordsets | |||
| 90° M22 Motor Cordset | IP67/NEMA Type 4 | 6 (19.6) | 280-MTR22-M6 |
| 14 (45.9) | 280-MTR22-M14 | ||
| 90° M35 Motor Cordset | IP67/NEMA Type 4 | 6 (19.6) | 280-MTR35-M6 |
| 14 (45.9) | 280-MTR35-M14 | ||
| 90° M22 Motor Cordset | IP69K | 6 (19.6) | 280S-MTR22-M6 |
| 14 (45.9) | 280S-MTR22-M14 | ||
| 90° M35 Motor Cordset | IP69K | 6 (19.6) | 280S-MTR35-M6 |
| 14 (45.9) | 280S-MTR35-M14 | ||
| Motor Cable Patchcords | |||
| 90° Male/Straight Female M22 | IP67/NEMA Type 4 | 1 (3.3) | 280-MTR22-M1D |
| 3 (9.8) | 280-MTR22-M3D | ||
| 90° Male/Straight Female M35 | IP67/NEMA Type 4 | 1 (3.3) | 280-MTR35-M1D |
| 3 (9.8) | 280-MTR35-M3D | ||
| 90° Male/Straight Female M22 | IP69K | 1 (3.3) | 280S-MTR22-M1D |
| 3 (9.8) | 280S-MTR22-M3D | ||
| 90° Male/Straight Female M35 | IP69K | 1 (3.3) | 280S-MTR35-M1D |
| 3 (9.8) | 280S-MTR35-M3D | ||
ArmorPoint® Media §
| Description | Length m (ft) | Cat. No. |
| ArmorPoint Bus Extension Cable including Terminating Resistor | 1 (3.3) | 280A-EXT1 |
| Extension Cable to connect two ArmorStart Distributed Motor Controllers to ArmorPoint communication protocol | 1 (3.3) | 280A-EXTCABLE |
| § ArmorPoint media is only available with an IP67/NEMA Type 4 rating. | ||
DeviceNet Media §
Sensor Media z
Peer-to-Peer Communications
|
The Zone Control capabilities of ArmorStart Distributed Motor Controller is ideal for large horsepower (0.5…10 Hp) motored conveyors. The ArmorStart Distributed Motor Controllers have built-in DeviceNet Communications, DeviceLogix technology, and the added Zone Interlocking Parameters (ZIP) which allows one ArmorStart to consume data directly from up to four other DeviceNet nodes without going through the network scanner. These direct communications between conveyor zones are beneficial in a merge, diverter, and accumulation conveyor applications.
ArmorStart to ArmorPoint Connectivity - (Networks other than DeviceNet)
|
When connecting to the Bulletin 1738 ArmorPoint Distributed I/O product, a network adapter and at least one ArmorPoint Digital Output, Digital Input, Analog, AC and Relay product, or Specialty product must be selected. The ArmorPoint Distributed I/O can accomodate up to 63 modules per network node. The cable that connects the ArmorPoint Distributed I/O product to the ArmorStart Distributed Motor Controller is the Bulletin 280A-EXT1. The 280A-EXT1 includes an ArmorPoint bus extension cable and a network terminating resistor.
Note: Access to DeviceLogix programming is available with RSNetworx for DeviceNet.
If an additional ArmorStart Distributed Motor Controller is to be connected, the Bulletin 280A-EXTCABLE will be required. A maximum of two ArmorStart Distributed Motor Controllers can be connected to the Bulletin 1738 Distributed I/O.
|
I/O Expansion with DeviceNet
If the I/O capability of the Bulletin 280/281D ArmorStart Distributed Motor Controller needs to be expanded beyond the standard four inputs and two outputs, the ArmorStart Distributed Motor Controller with the DeviceNet communication protocol can be configured to the ADNX Architecture, in which the ArmorStart is part of the DeviceNet subnet, using the Bulletin 1738-ADNX ArmorPoint Distributed I/O product.
|
Bulletin 1738 ArmorPoint Distributed I/O Products
Digital Output Products
Digital Input Products
Analog Products
Power Supply Products
| Description | Cat. No. | |
|
|
ArmorPoint I/O Field Potential Distributor Module | 1738-FPD |
| 24V DC Expansion Power Supply | 1738-EP24DC | |
AC and Relay Products
Specialty Products
Adapter Products
