Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Distributed Starters (Networked) > Bulletin 283 ArmorStart Distributed Motor Controller
Bulletin 283 ArmorStart Distributed Motor Controller
| Introduction |  |
Standards Compliance and Certifications | |
Description | |
Factory Installed Options | |
Cat. No. Explanation | |
| Product Selection | |
Options – Factory Installed | |
Specifications | |
Approximate Dimensions | |
HOA Selector Keypad
The HOA Selector Keypad allows for local start/stop control.
Source Brake Contactor
An internal contactor is used to switch the electromechanical motor brake on/off. The motor brake is powered from the main power circuit. A customer accessible 3.0 A fuse is provided to protect the brake cable. A 3-meter, 3-pin cable for connection to the motor brake, is provided as standard when this option is selected.
Safety Monitor
The Safety Monitor Option allows for independent monitoring of the output status of the device. The function is implemented using a normally closed contact which complies with IEC 60947-5-1 for mechanically linked contacts. Two terminal blocks are provided as the inputs which maybe used with an external safety circuit. The external safety circuit monitors the status of the isolation contactor.