Distributed Starters (Networked)

Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Distributed Starters (Networked) > Bulletin 100 DeviceNet Starter Auxiliary™

Bulletin 100 DeviceNet Starter Auxiliary™

Introduction Standards Compliance Approvals Product Selection Specifications Approximate Dimensions
Specifications

Electrical Data
DeviceNet supply voltage 11…25V DC
DeviceNet input current max. 270 mA
Surge current at powerup <3 A for 5 ms
Site Conditions
Ambient temperature Operation 0…60°C (32…140°F)
Storage –40…85°C (–40…185°F)
Humidity 0…95% (without condensation)
Shock Operation 30 G, peak acceleration
Off-state 50 G, peak acceleration
Vibration resistance 2.5 G, at 10…500 Hz
DeviceNet Communication
Baud rate 125, 250, 500 kBit/s
Distance maximum 500 m (1640 ft.) with 125 kBit/s
200 m (656 ft.) with 250 kBit/s
100 m (328 ft.) with 500 kBit/s
Connection
Connection capacity: (dependent on wire type) 0.25…2.5 mm2/0.25…2.5 mm2/24…12 AWG
Wire type min. 75°C
Tightening torque 0.5…0.6 Nm (4.4…5.3 lb-in)
  

Input Specifications

Cat. Nos. 100-DNY21R, 100-DNY41R 100-DNY42R, 100-DNY42S
Inputs per device 4 4
On-state voltage range
Off-state voltage 		80…132V AC
40V, at 60 Hz 		10… 30V DC
5.5V DC
On-state current 1.2…2.0 mA 3 mA, at 10V (min)…11 mA, at 30V
Off-state current 0.6 mA min. 1.5 mA max.
Transition Voltage 40…79V AC 5…10V DC
Current 0.6…1.2 mA 1.5…3 mA
Sensor Source Voltage — 19…25V DC
Current — 35 mA
  

Output Specifications

Cat. No. 100-DNY41R, 100-DNY42R
(Relay Outputs) 		100-DNY42S
(Transistor Outputs)
Outputs per device 2 2
Voltage range max. 240V AC, 30V DC 15…30V DC, ±0.0%
Switching capacity max. 3600 VA
UL: B 300
IEC: AC-15: 5 A 		—
Thermal continuous current per output max. 5 A —
On-State voltage drop max. — 0.25V at 2 A
On-State current per output max. — 2 A
Maximum off-state leakage current — 1.5 mA
Surge current per output — 4 A for 50 ms