Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Soft Starters > SMC™-3 Smart Motor Controllers
SMC™-3 Smart Motor Controllers
| Introduction |  |
Standards Compliance and Certifications | |
Modes of Operation | |
Description of Features | |
Cat. No. Explanation | |
Product Selection | |
| Typical Wiring Diagrams | |
Specifications | |
Approximate Dimensions | |
Enclosed Options | |
Accessories | |
Accessories
Auxiliary Contact Blocks
| Description | N.O. | N.C. | Connection Diagram | Cat. No. | ||||
|
Auxiliary Contact Blocks for side mounting with sequence terminal designations 1- and 2-pole Quick and easy mounting without tools One block per device only |
1 | 0 |
|
|
|
|
150-CA10 |
| 2 | 0 | 150-CA20 | ||||||
| 0 | 1 | 150-CA01 | ||||||
| 1 | 1 | 150-CA11 (Form C) |
||||||
Fans
| Description | For Use With | Pkg. Qty. | Cat. No. | ||
|
Fan Field installed |
Optional | 150-C3…37 | 1 | 150-CF64 |
| Replacement | 150-C43…85 | 150-CF147 | |||
| 150-C108, 150-C135 | 41391-801-03 | ||||
| 150-C201, 150-C251 | 41391-801-01 | ||||
| 150-C317…C480 | 41391-801-02 | ||||
Connecting Modules
| Description | For Use With | Pkg. Qty. | Cat. No. | |
|
Connecting modules to 140-M Electrical interconnection between SMC-Delta/SMC-3 and 140-M. Motor protector and SMC must be mounted separately. |
Connects 140-M-C to 150-C3…25 |
1 | 150-CC25 |
| Connects 140-M-D to 150-C3…25 |
1 | 150-CD25 | ||
| Connects 140-M-F to 150-C3…37 |
1 | 150-CF45 | ||
|
Connecting modules to 100-C Electrical interconnection between SMC-Delta/SMC-3 and 100-C. Contactor and SMC must be mounted separately. |
Connects 100-C09…23 to 150-C3…19 |
1 | 150-CI23 |
| Connects 100-C30…37 to 150-C3…37 |
1 | 150-CI37 | ||
Protective Modules
Protective modules must not be placed on the load side of a device when using an inside-the-delta connection.
| Description | For Use With | Pkg. Qty. | Cat. No. | |
|
480V Protective Module | 150-C3…37NB | 1 | 150-C84 |
| 150-C43…85NB (line and/or load) | 1 | 150-C84P | ||
| 150-C108…480NB (line and/or load) | 1 | 150-F84L | ||
| 600V Protective Module | 150-C3…37NC | 1 | 150-C86 | |
| 150-C43…85NC (line and/or load) | 1 | 150-C86P | ||
| 150-C108…480NC (line and/or load) | 1 | 150-F86L | ||
IEC Terminal Covers
| Description | For Use With | Pkg. Qty. | Cat. No. | |
|
Terminal Cover IEC line or load terminal covers for 108…480 A devices. Dead front protection |
150-C108…-C135 | 1 | 150-TC1 |
| 150-C201…-C251 | 1 | 150-TC2 | ||
| 150-C317…-C480 | 1 | 150-TC3 | ||
Terminal Lug Kits (108…1250 A)
|
Current Rating (A) T |
Wire Size | Total No. of Line Controller Terminal Lugs Possible Each Side |
Pkg. Qty. | Cat. No. | |
| Line Side | Load Side | |||||
| 108…135§ | #6…250 MCM AWG 16 mm2…120 mm2 |
3 | 3 | 3 | 199-LF1 | |
| 201…251§ | 6 | 6 | ||||
| 317…480§ | #4…500 MCM AWG 25 mm2…240 mm2 |
6 | 6 | 199-LG1 | ||
| Line and Load terminals are provided as standard on enclosed SMCs. | ||||||
| T 1…85 A units have box lugs standard. No additional lugs are required. | ||||||
| § When a multi-conductor lug is required, refer to the Instruction Sheet for appropriate lug catalog number. | ||||||
Marking Tags and Covers
| Description | For Use With | Pkg. Qty. | Cat. No. | |
|
Marking Tag Sheet 160 perforated paper labels each, 6 x 17 mm, to be used with a transparent cover |
150-C, 150-D | 10 | 100-FMP |
| Transparent Cover To be used with marking tag sheets |
150-C, 150-D | 100 | 100-FMC | |
Remote Reset Solenoid
| Description | For Use With | Pkg. Qty. | Cat. No. | |
|
Remote Reset Solenoid for remote reset of electronic overload | 193-T all, 150-C | 1 | 193-ER1Ä |
Ä Voltage Suffix Code
Available Coil Voltages 12…600V 50 Hz/12…600V 60 Hz
Standard Coil Voltages
| Voltage | 24 | 48 | 110 | 115 | 120 | 220 | 240 |
| 50 Hz | J | — | D | — | — | A | — |
| 60 Hz | J | — | — | — | D | — | A |
| DC | Z24 | Z48 | — | Z01 | — | — | — |
| Surcharge for special voltages up to 20 pcs. (no surcharge for quantities greater than 20 pcs.) | |||||||