Soft Starters

Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Soft Starters > SMC™ Flex Smart Motor Controllers

SMC™ Flex Smart Motor Controllers

Introduction Standards Compliance and Certifications Modes of Operation Description Cat. No. Explanation
Product Selection Modifications Accessories Specifications Approximate Dimensions
Open Type and Non-Combination Enclosed (IP65, Type 4/12) Controllers — For use with Line-Connected Motors

Build a Catalog Number


Enclosures other than those listed are available; consult your local Rockwell Automation sales office or Allen-Bradley distributor.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type — Line-Connected Motors⋆  IP65 (Type 4/12) Enclosed
Non-Combination Controllers♣ ♦ 
Cat. No. Cat. No.
200/208 1…5 — 1 100…240V AC, 50/60 Hz 150-F5NBD 150-F5FHD
24V AC/DC∆  150-F5NBR —
5...25 — 5 100…240V AC, 50/60 Hz 150-F25NBD 150-F25FHD
24V AC/DC∆  150-F25NBR —
8.6...43 — 10 100…240V AC, 50/60 Hz 150-F43NBD 150-F43FHD
24V AC/DC∆  150-F43NBR —
12...60 — 15 100…240V AC, 50/60 Hz 150-F60NBD 150-F60FHD
24V AC/DC∆  150-F60NBR —
17...85 — 25 100…240V AC, 50/60 Hz 150-F85NBD 150-F85FHD
24V AC/DC∆  150-F85NBR —
27…108 — 30 100…240V AC, 50/60 Hz 150-F108NBD 150-F108FHD
24V AC/DC∆  150-F108NBR —
34…135 — 40 100…240V AC, 50/60 Hz 150-F135NBD 150-F135FHD
24V AC/DC∆  150-F135NBR —
67…201 — 60 100…240V AC, 50/60 Hz 150-F201NBD 150-F201FHD
24V AC/DC∆  150-F201NBR —
84…251 — 75 100…240V AC, 50/60 Hz 150-F251NBD 150-F251FHD
24V AC/DC∆  150-F251NBR —
106…317 — 100 100…240V AC, 50/60 Hz 150-F317NBD 150-F317FHD
24V AC/DC∆  150-F317NBR —
120…361 — 125 100…240V AC, 50/60 Hz 150-F361NBD 150-F361FHD
24V AC/DC∆  150-F361NBR —
160…480 — 150 100…240V AC, 50/60 Hz 150-F480NBD 150-F480FHD
24V AC/DC∆  150-F480NBR —
208…625 — 200 110/120V AC, 50/60 Hz 150-F625NBE ♠  150-F625JHE
230/240V AC, 50/60 Hz 150-F625NBA ♠  150-F625JHA
260…780 — 250 110/120V AC, 50/60 Hz 150-F780NBE ♠  150-F780JHE
230/240V AC, 50/60 Hz 150-F780NBA ♠  150-F780JHA
323…970 — 350 110/120V AC, 50/60 Hz 150-F970NBE —
230/240V AC, 50/60 Hz 150-F970NBA —
416…1250 — 400 110/120V AC, 50/60 Hz 150-F1250NBE —
230/240V AC, 50/60 Hz 150-F1250NBA —
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
♣ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.
♦ Line and load termination are provided as standard.
♠ Available in IP54 (Type 12) enclosure only.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type — Line-Connected Motors⋆  IP65 (Type 4/12) Enclosed
Non-Combination Controllers♣ ♦ 
Cat. No. Cat. No.
230 1…5 1.1 1 100…240V AC, 50/60 Hz 150-F5NBD 150-F5FAD
24V AC/DC∆  150-F5NBR —
5...25 5.5 7.5 100…240V AC, 50/60 Hz 150-F25NBD 150-F25FAD
24V AC/DC∆  150-F25NBR —
8.6...43 11 15 100…240V AC, 50/60 Hz 150-F43NBD 150-F43FAD
24V AC/DC∆  150-F43NBR —
12...60 15 20 100…240V AC, 50/60 Hz 150-F60NBD 150-F60FAD
24V AC/DC∆  150-F60NBR —
17...85 22 30 100…240V AC, 50/60 Hz 150-F85NBD 150-F85FAD
24V AC/DC∆  150-F85NBR —
27…108 30 40 100…240V AC, 50/60 Hz 150-F108NBD 150-F108FAD
24V AC/DC∆  150-F108NBR —
34…135 37 50 100…240V AC, 50/60 Hz 150-F135NBD 150-F135FAD
24V AC/DC∆  150-F135NBR —
67…201 55 75 100…240V AC, 50/60 Hz 150-F201NBD 150-F201FAD
24V AC/DC∆  150-F201NBR —
84…251 75 100 100…240V AC, 50/60 Hz 150-F251NBD 150-F251FAD
24V AC/DC∆  150-F251NBR —
106…317 90 125 100…240V AC, 50/60 Hz 150-F317NBD 150-F317FAD
24V AC/DC∆  150-F317NBR —
120…361 110 150 100…240V AC, 50/60 Hz 150-F361NBD 150-F361FAD
24V AC/DC∆  150-F361NBR —
160…480 132 200 100…240V AC, 50/60 Hz 150-F480NBD 150-F480FAD
24V AC/DC∆  150-F480NBR —
208…625 200 250 110/120V AC, 50/60 Hz 150-F625NBE ♠  150-F625JAE
230/240V AC, 50/60 Hz 150-F625NBA ♠  150-F625JAA
260…780 250 300 110/120V AC, 50/60 Hz 150-F780NBE ♠  150-F780JAE
230/240V AC, 50/60 Hz 150-F780NBA ♠  150-F780JAA
323…970 315 400 110/120V AC, 50/60 Hz 150-F970NBE —
230/240V AC, 50/60 Hz 150-F970NBA —
416…1250 400 500 110/120V AC, 50/60 Hz 150-F1250NBE —
230/240V AC, 50/60 Hz 150-F1250NBA —
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
♣ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.
♦ Line and load termination are provided as standard.
♠ Available in IP54 (Type 12) enclosure only.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type — Line-Connected Motors⋆  IP65 (Type 4/12) Enclosed
Non-Combination Controllers♣ ♦ 
Cat. No. Cat. No.
400/415/460 1…5 2.2 3 100…240V AC, 50/60 Hz 150-F5NBD 150-F5FBD
24V AC/DC∆  150-F5NBR —
5...25 11 15 100…240V AC, 50/60 Hz 150-F25NBD 150-F25FBD
24V AC/DC∆  150-F25NBR —
8.6...43 22 30 100…240V AC, 50/60 Hz 150-F43NBD 150-F43FBD
24V AC/DC∆  150-F43NBR —
12...60 30 40 100…240V AC, 50/60 Hz 150-F60NBD 150-F60FBD
24V AC/DC∆  150-F60NBR —
17...85 45 60 100…240V AC, 50/60 Hz 150-F85NBD 150-F85FBD
24V AC/DC∆  150-F85NBR —
27…108 55 75 100…240V AC, 50/60 Hz 150-F108NBD 150-F108FBD
24V AC/DC∆  150-F108NBR —
34…135 75 100 100…240V AC, 50/60 Hz 150-F135NBD 150-F135FBD
24V AC/DC∆  150-F135NBR —
67…201 110 150 100…240V AC, 50/60 Hz 150-F201NBD 150-F201FBD
24V AC/DC∆  150-F201NBR —
84…251 132 200 100…240V AC, 50/60 Hz 150-F251NBD 150-F251FBD
24V AC/DC∆  150-F251NBR —
106…317 160 250 100…240V AC, 50/60 Hz 150-F317NBD 150-F317FBD
24V AC/DC∆  150-F317NBR —
120…361 200 300 100…240V AC, 50/60 Hz 150-F361NBD 150-F361FBD
24V AC/DC∆  150-F361NBR —
160…480 250 400 100…240V AC, 50/60 Hz 150-F480NBD 150-F480FBD
24V AC/DC∆  150-F480NBR —
208…625 355 500 110/120V AC, 50/60 Hz 150-F625NBE ♠  150-F625JBE
230/240V AC, 50/60 Hz 150-F625NBA ♠  150-F625JBA
260…780 450 600 110/120V AC, 50/60 Hz 150-F780NBE ♠  150-F780JBE
230/240V AC, 50/60 Hz 150-F780NBA ♠  150-F780JBA
323…970 560 800 110/120V AC, 50/60 Hz 150-F970NBE —
230/240V AC, 50/60 Hz 150-F970NBA —
416…1250 710 1000 110/120V AC, 50/60 Hz 150-F1250NBE —
230/240V AC, 50/60 Hz 150-F1250NBA —
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
♣ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.
♦ Line and load termination are provided as standard.
♠ Available in IP54 (Type 12) enclosure only.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type — Line-Connected Motors⋆  IP65 (Type 4/12) Enclosed
Non-Combination Controllers♣ ♦ 
Cat. No. Cat. No.
500/575 1...5 2.2 3 100…240V AC, 50/60 Hz 150-F5NCD 150-F5FCD
24V AC/DC∆  150-F5NCR —
5...25 15 20 100…240V AC, 50/60 Hz 150-F25NCD 150-F25FCD
24V AC/DC∆  150-F25NCR —
8.6...43 22 40 100…240V AC, 50/60 Hz 150-F43NCD 150-F43FCD
24V AC/DC∆  150-F43NCR —
12...60 37 50 100…240V AC, 50/60 Hz 150-F60NCD 150-F60FCD
24V AC/DC∆  150-F60NCR —
17...85 55 75 100…240V AC, 50/60 Hz 150-F85NCD 150-F85FCD
24V AC/DC∆  150-F85NCR —
27…108 75 100 100…240V AC, 50/60 Hz 150-F108NCD 150-F108FCD
24V AC/DC∆  150-F108NCR —
34…135 90 125 100…240V AC, 50/60 Hz 150-F135NCD 150-F135FCD
24V AC/DC∆  150-F135NCR —
67…201 132 200 100…240V AC, 50/60 Hz 150-F201NCD 150-F201FCD
24V AC/DC∆  150-F201NCR —
84…251 160 250 100…240V AC, 50/60 Hz 150-F251NCD 150-F251FCD
24V AC/DC∆  150-F251NCR —
106…317 200 300 100…240V AC, 50/60 Hz 150-F317NCD 150-F317FCD
24V AC/DC∆  150-F317NCR —
120…361 250 350 100…240V AC, 50/60 Hz 150-F361NCD 150-F361FCD
24V AC/DC∆  150-F361NCR —
160…480 315 500 100…240V AC, 50/60 Hz 150-F480NCD 150-F480FCD
24V AC/DC∆  150-F480NCR —
208…625 450 600 110/120V AC, 50/60 Hz 150-F625NCE ♠  150-F625JCE
230/240V AC, 50/60 Hz 150-F625NCA ♠  150-F625JCA
260…780 560 800 110/120V AC, 50/60 Hz 150-F780NCE ♠  150-F780JCE
230/240V AC, 50/60 Hz 150-F780NCA ♠  150-F780JCA
323…970 710 1000 110/120V AC, 50/60 Hz 150-F970NCE —
230/240V AC, 50/60 Hz 150-F970NCA —
416…1250 900 1300 110/120V AC, 50/60 Hz 150-F1250NCE —
230/240V AC, 50/60 Hz 150-F1250NCA —
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
♣ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.
♦ Line and load termination are provided as standard.
♠ Available in IP54 (Type 12) enclosure only.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type — Line-Connected Motors⋆ 
Cat. No.
690/Y§  27…108 90 100 100…240V AC, 50/60 Hz 150-F108NZD
34…135 132 175 100…240V AC, 50/60 Hz 150-F135NZD
67…201 160 200 100…240V AC, 50/60 Hz 150-F201NZD
84…251 200 250 100…240V AC, 50/60 Hz 150-F251NZD
106…317 315 400 100…240V AC, 50/60 Hz 150-F317NZD
120…361 355 450 100…240V AC, 50/60 Hz 150-F361NZD
160…480 450 600 100…240V AC, 50/60 Hz 150-F480NZD
208…625 630 800 110/120V AC, 50/60 Hz 150-F625NZE
230/240V AC, 50/60 Hz 150-F625NZA
260…780 800 1000 110/120V AC, 50/60 Hz 150-F780NZE
230/240V AC, 50/60 Hz 150-F780NZA
323…970 1000 1300 110/120V AC, 50/60 Hz 150-F970NZE
230/240V AC, 50/60 Hz 150-F970NZA
416…1250 1200 1600 110/120V AC, 50/60 Hz 150-F1250NZE
230/240V AC, 50/60 Hz 150-F1250NZA
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
♣ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.
♦ Line and load termination are provided as standard.
§ To be used only in a Y-type system.

Open Type Controllers — For use with Delta-Connected Motors

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type⋆ 
Cat. No.
200/208 1.7…8.7 — 2 100…240V AC, 50/60 Hz 150-F5NBD
24V AC/DC∆  150-F5NBR
8.7…43 — 10 100…240V AC, 50/60 Hz 150-F25NBD
24V AC/DC∆  150-F25NBR
14.9…74 — 20 100…240V AC, 50/60 Hz 150-F43NBD
24V AC/DC∆  150-F43NBR
20.8…104 — 30 100…240V AC, 50/60 Hz 150-F60NBD
24V AC/DC∆  150-F60NBR
29.4…147 — 40 100…240V AC, 50/60 Hz 150-F85NBD
24V AC/DC∆  150-F85NBR
47…187 — 60 100…240V AC, 50/60 Hz 150-F108NBD
24V AC/DC∆  150-F108NBR
59…234 — 75 100…240V AC, 50/60 Hz 150-F135NBD
24V AC/DC∆  150-F135NBR
116…348 — 100 100…240V AC, 50/60 Hz 150-F201NBD
24V AC/DC∆  150-F201NBR
145…435 — 150 100…240V AC, 50/60 Hz 150-F251NBD
24V AC/DC∆  150-F251NBR
183…549 — 200 100…240V AC, 50/60 Hz 150-F317NBD
24V AC/DC∆  150-F317NBR
208…625 — 200 100…240V AC, 50/60 Hz 150-F361NBD
24V AC/DC∆  150-F361NBR
277…831 — 300 100…240V AC, 50/60 Hz 150-F480NBD
24V AC/DC∆  150-F480NBR
283…850 — 300 110/120V AC, 50/60 Hz 150-F625NBE
230/240V AC, 50/60 Hz 150-F625NBA
300…900 — 300 110/120V AC, 50/60 Hz 150-F780NBE
230/240V AC, 50/60 Hz 150-F780NBA
400…1200 — 400 110/120V AC, 50/60 Hz 150-F970NBE
230/240V AC, 50/60 Hz 150-F970NBA
533…1600 — 500 110/120V AC, 50/60 Hz 150-F1250NBE
230/240V AC, 50/60 Hz 150-F1250NBA
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type⋆ 
Cat. No.
230 1.7…8.7 2.2 2 100…240V AC, 50/60 Hz 150-F5NBD
24V AC/DC∆  150-F5NBR
8.7…43 11 15 100…240V AC, 50/60 Hz 150-F25NBD
24V AC/DC∆  150-F25NBR
14.9…74 22 25 100…240V AC, 50/60 Hz 150-F43NBD
24V AC/DC∆  150-F43NBR
20.8…104 30 40 100…240V AC, 50/60 Hz 150-F60NBD
24V AC/DC∆  150-F60NBR
29.4…147 45 50 100…240V AC, 50/60 Hz 150-F85NBD
24V AC/DC∆  150-F85NBR
47…187 55 60 100…240V AC, 50/60 Hz 150-F108NBD
24V AC/DC∆  150-F108NBR
59…234 75 75 100…240V AC, 50/60 Hz 150-F135NBD
24V AC/DC∆  150-F135NBR
116…348 110 125 100…240V AC, 50/60 Hz 150-F201NBD
24V AC/DC∆  150-F201NBR
145…435 132 150 100…240V AC, 50/60 Hz 150-F251NBD
24V AC/DC∆  150-F251NBR
183…549 160 200 100…240V AC, 50/60 Hz 150-F317NBD
24V AC/DC∆  150-F317NBR
208…625 200 250 100…240V AC, 50/60 Hz 150-F361NBD
24V AC/DC∆  150-F361NBR
277…831 250 350 100…240V AC, 50/60 Hz 150-F480NBD
24V AC/DC∆  150-F480NBR
283…850 250 350 110/120V AC, 50/60 Hz 150-F625NBE
230/240V AC, 50/60 Hz 150-F625NBA
300…900 250 350 110/120V AC, 50/60 Hz 150-F780NBE
230/240V AC, 50/60 Hz 150-F780NBA
400…1200 400 400 110/120V AC, 50/60 Hz 150-F970NBE
230/240V AC, 50/60 Hz 150-F970NBA
533…1600 500 600 110/120V AC, 50/60 Hz 150-F1250NBE
230/240V AC, 50/60 Hz 150-F1250NBA
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type⋆ 
Cat. No.
400/415/460 1.7…8.7 4 5 100…240V AC, 50/60 Hz 150-F5NBD
24V AC/DC∆  150-F5NBR
8.7…43 22 30 100…240V AC, 50/60 Hz 150-F25NBD
24V AC/DC∆  150-F25NBR
14.9…74 37 50 100…240V AC, 50/60 Hz 150-F43NBD
24V AC/DC∆  150-F43NBR
20.8…104 55 75 100…240V AC, 50/60 Hz 150-F60NBD
24V AC/DC∆  150-F60NBR
29.4…147 75 100 100…240V AC, 50/60 Hz 150-F85NBD
24V AC/DC∆  150-F85NBR
47…187 90 150 100…240V AC, 50/60 Hz 150-F108NBD
24V AC/DC∆  150-F108NBR
59…234 132 150 100…240V AC, 50/60 Hz 150-F135NBD
24V AC/DC∆  150-F135NBR
116…348 160 250 100…240V AC, 50/60 Hz 150-F201NBD
24V AC/DC∆  150-F201NBR
145…435 250 350 100…240V AC, 50/60 Hz 150-F251NBD
24V AC/DC∆  150-F251NBR
183…549 315 450 100…240V AC, 50/60 Hz 150-F317NBD
24V AC/DC∆  150-F317NBR
208…625 355 500 100…240V AC, 50/60 Hz 150-F361NBD
24V AC/DC∆  150-F361NBR
277…831 450 700 100…240V AC, 50/60 Hz 150-F480NBD
24V AC/DC∆  150-F480NBR
283…850 500 700 110/120V AC, 50/60 Hz 150-F625NBE
230/240V AC, 50/60 Hz 150-F625NBA
300…900 500 700 110/120V AC, 50/60 Hz 150-F780NBE
230/240V AC, 50/60 Hz 150-F780NBA
400…1200 710 1000 110/120V AC, 50/60 Hz 150-F970NBE
230/240V AC, 50/60 Hz 150-F970NBA
533…1600 900 1400 110/120V AC, 50/60 Hz 150-F1250NBE
230/240V AC, 50/60 Hz 150-F1250NBA
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.

Rated Voltage
[V AC] 		Motor Current [A]‡  Max. kW, 50 Hz Max. Hp, 60 Hz Control Power Open Type⋆ 
Cat. No.
500/575 1.7…8.7 5.5 7.5 100…240V AC, 50/60 Hz 150-F5NCD
24V AC/DC∆  150-F5NCR
8.7…43 15 40 100…240V AC, 50/60 Hz 150-F25NCD
24V AC/DC∆  150-F25NCR
14.9…74 45 60 100…240V AC, 50/60 Hz 150-F43NCD
24V AC/DC∆  150-F43NCR
20.8…104 55 100 100…240V AC, 50/60 Hz 150-F60NCD
24V AC/DC∆  150-F60NCR
29.4…147 90 150 100…240V AC, 50/60 Hz 150-F85NCD
24V AC/DC∆  150-F85NCR
47…187 132 150 100…240V AC, 50/60 Hz 150-F108NCD
24V AC/DC∆  150-F108NCR
59…234 160 200 100…240V AC, 50/60 Hz 150-F135NCD
24V AC/DC∆  150-F135NCR
116…348 250 300 100…240V AC, 50/60 Hz 150-F201NCD
24V AC/DC∆  150-F201NCR
145…435 315 400 100…240V AC, 50/60 Hz 150-F251NCD
24V AC/DC∆  150-F251NCR
183…549 400 500 100…240V AC, 50/60 Hz 150-F317NCD
24V AC/DC∆  150-F317NCR
208…625 450 600 100…240V AC, 50/60 Hz 150-F361NCD
24V AC/DC∆  150-F361NCR
277…831 560 900 100…240V AC, 50/60 Hz 150-F480NCD
24V AC/DC∆  150-F480NCR
283…850 560 900 110/120V AC, 50/60 Hz 150-F625NCE
230/240V AC, 50/60 Hz 150-F625NCA
300…900 630 900 110/120V AC, 50/60 Hz 150-F780NCE
230/240V AC, 50/60 Hz 150-F780NCA
400…1200 800 1300 110/120V AC, 50/60 Hz 150-F970NCE
230/240V AC, 50/60 Hz 150-F970NCA
533…1600 1100 1600 110/120V AC, 50/60 Hz 150-F1250NCE
230/240V AC, 50/60 Hz 150-F1250NCA
  
⋆ Controllers rated 108 A and greater are not equipped with line and load terminal lugs. See Terminal Lug Kits (108…1250 A) for terminal lug kits.
‡ Motor FLA rating should fall within specified current range for unit to operate properly. Special consideration should be given when using a motor with a potentially high starting current (greater than ten times motor FLA) with the SMC Flex in the "Full Voltage" starting mode. Contact Rockwell Automation technical support for further guidance.
∆ Separate 120V or 240V single-phase power supply is required for fan operation.

Combination Line-Connected Controllers — IP65 (Type 4/12) Enclosed with Fusible Disconnect or Circuit Breaker

Build a Catalog Number


These controllers include line and load terminations. Enclosures other than those listed are available; consult your local Rockwell Automation sales office or Allen-Bradley distributor. All 153 bulletin numbers are supplied with thermal magnetic circuit breakers.

The Fusible Disconnects do not come with fuses.

Rated Voltage
[V AC] 		kW, 50 Hz Hp, 60 Hz Controller Current
Rating [A] ‡  		IP65 (Type 4/12) Enclosed Combination Controllers with Fusible Disconnect⋆  IP65 (Type 4/12) Enclosed Combination Controllers with Circuit Breaker⋆ 
Cat. No.♣  Cat. No.
200 — 0.5 5 152H-F5FHD-33 153H-F5FHD-33
— 0.75 5 152H-F5FHD-34 153H-F5FHD-34
— 1 5 152H-F5FHD-35 153H-F5FHD-35
— 1.5 25 152H-F25FHD-36 153H-F25FHD-36
— 2 25 152H-F25FHD-37 153H-F25FHD-37
— 3 25 152H-F25FHD-38 153H-F25FHD-38
— 5 25 152H-F25FHD-39 153H-F25FHD-39
— 5 25 152H-F25FHD-40 153H-F25FHD-40
— 10 43 152H-F43FHD-41 153H-F43FHD-41
— 15 60 152H-F60FHD-42 153H-F60FHD-42
— 20 85 152H-F85FHD-43 153H-F85FHD-43
— 25 85 152H-F85FHD-44 153H-F85FHD-44
— 30 108 152H-F108FHD-45 153H-F108FHD-45
— 40 135 152H-F135FHD-46 153H-F135FHD-46
— 50 201 152H-F201FHD-47 153H-F201FHD-47
— 60 201 152H-F201FHD-48 153H-F201FHD-48
— 75 251 152H-F251FHD-49 153H-F251FHD-49
— 100 317 152H-F317FHD-50 153H-F317FHD-50
— 125 361 152H-F361FHD-51 153H-F361FHD-51
— 150 480 152H-F480FHD-52 153H-F480FHD-52
— 200 625 ∆  152H-F625JHD-54 ∆  153H-F625JHD-54
— 250 780 ∆  152H-F780JHD-56 ∆  153H-F780JHD-56
230 0.37 0.5 5 152H-F5FAD-33 153H-F5FAD-33
0.55 0.75 5 152H-F5FAD-34 153H-F5FAD-34
0.75 1 5 152H-F5FAD-35 153H-F5FAD-35
1.1 1.5 25 152H-F25FAD-36 153H-F25FAD-36
1.5 2 25 152H-F25FAD-37 153H-F25FAD-37
2.2 3 25 152H-F25FAD-38 153H-F25FAD-38
3.7 5 25 152H-F25FAD-39 153H-F25FAD-39
5.5 7.5 25 152H-F25FAD-40 153H-F25FAD-40
7.5 10 43 152H-F43FAD-41 153H-F43FAD-41
11 15 43 152H-F43FAD-42 153H-F43FAD-42
15 20 60 152H-F60FAD-43 153H-F60FAD-43
18.5 25 85 152H-F85FAD-44 153H-F85FAD-44
22 30 85 152H-F85FAD-45 153H-F85FAD-45
30 40 108 152H-F108FAD-46 153H-F108FAD-46
37 50 135 152H-F135FAD-47 153H-F135FAD-47
45 60 201 152H-F201FAD-48 153H-F201FAD-48
55 75 201 152H-F201FAD-49 153H-F201FAD-49
75 100 251 152H-F251FAD-50 153H-F251FAD-50
90 125 317 152H-F317FAD-51 153H-F317FAD-51
110 150 361 152H-F361FAD-52 153H-F361FAD-52
132 200 480 ∆  152H-F480JAD-54 153H-F480FAD-54
185 250 625 ∆  152H-F625JAD-56 ∆  153H-F625JAD-56
220 300 780 ∆  152H-F780JAD-57 ∆  153H-F780JAD-57
  
⋆ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
‡ The nominal current rating for the combination package may differ from the controller, based on the horsepower. Consult your local Rockwell Automation sales office or Allen-Bradley distributor.
♣ Provided with Class J or L fuse clips as standard.
∆ Available in IP54 (Type 12) enclosure only.

Rated Voltage
[V AC] 		kW, 50 Hz Hp, 60 Hz Controller Current
Rating [A] ‡  		IP65 (Type 4/12) Enclosed Combination Controllers with Fusible Disconnect⋆  IP65 (Type 4/12) Enclosed Combination Controllers with Circuit Breaker⋆ 
Cat. No.♣  Cat. No.
400/460 0.37 0.5 5 152H-F5FBD-33 153H-F5FBD-33
0.55 0.75 5 152H-F5FBD-34 153H-F5FBD-34
0.75 1 5 152H-F5FBD-35 153H-F5FBD-35
1.1 1.5 5 152H-F5FBD-36 153H-F5FBD-36
1.5 2 5 152H-F5FBD-37 153H-F5FBD-37
2.2 3 5 152H-F5FBD-38 153H-F5FBD-38
3.7 5 25 152H-F25FBD-39 153H-F25FBD-39
5.5 7.5 25 152H-F25FBD-40 153H-F25FBD-40
7.5 10 25 152H-F25FBD-41 153H-F25FBD-41
11 15 25 152H-F25FBD-42 153H-F25FBD-42
15 20 43 152H-F43FBD-43 153H-F25FBD-43
18.5 25 43 152H-F43FBD-44 153H-F43FBD-44
22 30 43 152H-F43FBD-45 153H-F43FBD-45
30 40 60 152H-F60FBD-46 153H-F60FBD-46
37 50 85 152H-F85FBD-47 153H-F85FBD-47
45 60 85 152H-F85FBD-48 153H-F85FBD-48
55 75 108 152H-F108FBD-49 153H-F108FBD-49
75 100 135 152H-F135FBD-50 153H-F135FBD-50
90 125 201 152H-F201FBD-51 153H-F201FBD-51
110 150 201 152H-F201FBD-52 153H-F201FBD-52
132 200 251 152H-F251FBD-54 153H-F251FBD-54
160 250 317 152H-F317FBD-56 153H-F317FBD-56
200 300 361 152H-F361FBD-57 153H-F361FBD-57
250 350 480 152H-F480FBD-58 153H-F480FBD-58
250 400 480 ∆  152H-F480JBD-59 153H-F480FBD-59
355 500 625 ∆  152H-F625JBD-61 ∆  153H-F625JBD-61
450 600 780 ∆  152H-F780JBD-62 ∆  153H-F780JBD-62
500/575 0.55 0.75 5 152H-F5FCD-34 153H-F5FCD-34
0.75 1 5 152H-F5FCD-35 153H-F5FCD-35
1.1 1.5 5 152H-F5FCD-36 153H-F5FCD-36
1.5 2 5 152H-F5FCD-37 153H-F5FCD-37
2.2 3 5 152H-F5FCD-38 153H-F5FCD-38
3.7 5 25 152H-F25FCD-39 153H-F25FCD-39
5.5 7.5 25 152H-F25FCD-40 153H-F25FCD-40
7.5 10 25 152H-F25FCD-41 153H-F25FCD-41
11 15 25 152H-F25FCD-42 153H-F25FCD-42
15 20 43 152H-F43FCD-43 153H-F43FCD-43
18.5 25 43 152H-F43FCD-44 153H-F43FCD-44
22 30 43 152H-F43FCD-45 153H-F43FCD-45
22 40 43 152H-F43FCD-46 153H-F43FCD-46
37 50 60 152H-F60FCD-47 153H-F60FCD-47
45 60 85 152H-F85FCD-48 153H-F85FCD-48
55 75 85 152H-F85FCD-49 153H-F85FCD-49
75 100 108 152H-F108FCD-50 153H-F108FCD-50
90 125 135 152H-F135FCD-51 153H-F135FCD-51
110 150 201 152H-F201FCD-52 153H-F201FCD-52
132 200 201 152H-F201FCD-54 153H-F201FCD-54
160 250 251 152H-F251FCD-56 153H-F251FCD-56
200 300 317 152H-F317FCD-57 153H-F317FCD-57
250 350 361 152H-F361FCD-58 153H-F361FCD-58
295 400 480 ∆  152H-F480JCD-59 153H-F480FCD-59
315 450 480 ∆  152H-F480JCD-60 153H-F480FCD-60
315 500 480 ∆  152H-F480JCD-61 153H-F480FCD-61
450 600 625 ∆  152H-F625JCD-62 ∆  153H-F625JCD-62
560 800 780 ∆  152H-F780JCD-65 ∆  153H-F780JCD-65
  
⋆ These controllers require a separate 100…240V, 50/60 Hz single-phase control source. To add a control circuit transformer to the enclosure, add the appropriate option code to the catalog string.
‡ The nominal current rating for the combination package may differ from the controller, based on the horsepower. Consult your local Rockwell Automation sales office or Allen-Bradley distributor.
♣ Provided with Class J or L fuse clips as standard.
∆ Available in IP54 (Type 12) enclosure only.