Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Soft Starters > SMC™ Flex Smart Motor Controllers
SMC™ Flex Smart Motor Controllers
| Introduction |  |
Standards Compliance and Certifications | |
Modes of Operation | |
Introduction | |
Cat. No. Explanation | |
| Product Selection | |
Control Options (open and enclosed) | |
Accessories | |
Specifications | |
Approximate Dimensions and Shipping Weights | |
Protective Modules¬
Protective modules must not be placed on the load side of a device when using an inside-the-delta connection or with Pump and Braking control.
|
Current Rating | Description | Field Modification Cat. No. |
| 5…85 | 480V Protective Module | 150-F84 | |
| 108…1250 | 150-F84L | ||
| 5…85 | 600V Protective Module | 150-F86 | |
| 108…1250 | 150-F86L | ||
| ¬ The same protective module mounts on the line or load side of the SMC-Flex. For applications requiring both line and load side protection, two protective modules must be ordered. | |||
Terminal Lug Kits (108…1250 A)
|
Current Rating (A) T |
Wire Size | Total No. of Line Controller Terminal Lugs Possible Each Side |
Pkg. Qty. | Cat. No. | |
| Line Side | Load Side | |||||
| 108…135§ | #6…250 MCM AWG 16 mm2…120 mm2 |
3 | 3 | 3 | 199-LF1 | |
| 201…251§ | 6 | 6 | ||||
| 317…480§ | #4…500 MCM AWG 25 mm2…240 mm2 |
6 | 6 | 199-LG1 | ||
| 625…780 | 2/0…500 MCM AWG | 6 | 6 | 100-DL630 | ||
| 970 | 4/0…500 MCM AWG | 3 | 3 | 100-DL860 | ||
| 1250§ | 2/0…500 MCM AWG | 3 | 3 | 100-DL630 | ||
| 4/0…500 MCM AWG | 3 | 3 | 100-DL860 | |||
| Line and Load terminals are provided as standard on enclosed SMCs. | ||||||
| T 5…85 A units have box lugs standard. No additional lugs are required. | ||||||
| § The 1250 A device requires (1) 100-DL630 and (1) 100-DL860 per connection. | ||||||
| § When a multi-conductor lug is required, refer to the User Manual for appropriate lug catalog number. | ||||||
IEC Terminal Covers
|
Description‡ | Package Quantity | Field Modification Cat. No. |
| IEC line or load terminal covers for 108 and 135 A devices. Dead front protection |
1 | 150-TC1 | |
| IEC line or load terminal covers for 201…251 A devices. Dead front protection |
1 | 150-TC2 | |
| IEC line or load terminal covers for 317…480 A devices. Dead front protection |
1 | 150-TC3 | |
Human Interface and Communication Modules
| Description | Cat. No. | |||
|
Hand-Held Human Interface Modules |
LCD Display, Full Numeric Keypad¬ | 20-HIM-A3 | |
| LCD Display, Programmer Only¬ | 20-HIM-A5 | |||
| Door-Mounted Human Interface Modules |
Remote (Panel Mount) LCD Display, Full Numeric Keypad | 20-HIM-C3S | ||
| LCD Display, Programmer Only HIM (includes 3 m cable) | 20-HIM-C5S | |||
| Human Interface Module Interface Cables |
PowerFlex HIM Interface Cable, 1 m (39 in) | 20-HIM-H10 | ||
| Cable Kit (Male-Female) 0.33 m (1.1 ft) | 1202-H03 | |||
| Cable Kit (Male-Female) 1 m (3.3 ft) | 1202-H10 | |||
| Cable Kit (Male-Female) 3 m (9.8 ft) | 1202-H30 | |||
| Cable Kit (Male-Female) 9 m (29.5 ft) | 1202-H90 | |||
| DPI/SCANport™ One to Two Port Splitter Cable | 1203-S03 | |||
| Description (IP30/Type 1) | For Use With | |||
|
Communication Modules | Remote I/O Communication Adapter | Bulletin 150 SMC Flex | 20-COMM-R |
| RS485 DF1 Communication Adapter | 20-COMM-S | |||
| PROFIBUS™ DP Communication Adapter | 20-COMM-P | |||
| ControlNet™ Communication Adapter (Coax) | 20-COMM-C | |||
| Interbus™ Communication Adapter | 20-COMM-I | |||
| Modbus/TCP Communication Adapter | 20-COMM-M | |||
| DeviceNet™ Communication Adapter | 20-COMM-D | |||
| EtherNet/IP™ Communication Adapter | 20-COMM-E | |||
| HVAC Communication Adapter | 20-COMM-H | |||
| ControlNet™ Communication Adapter (Fiber) | 20-COMM-Q | |||
| DriveTools™ | Programming Software | WIN NT/2000/XP | 9303-4DTE01ENE | |
| DriveTools™ Sp | Programming Software | WIN NT/2000/XP | 9303-4DTS01ENE | |
| AnaCANda™ RS-232 to DPi | PC Interface | Serial | 1203-SSS | |
| DPi to USB | PC Interface | USB | 1203-USB | |
| ¬ Requires a 20-HIM-H10 cable to connect to the SMC-Flex. | ||||