Catalogs > Industrial Controls Catalog > Motor Control, Solid-State > Soft Starters > Bulletin 150 Overview
Bulletin 150 Overview
Product Overview
|
|
|
|
||
| Features | SMC™ Flex | SMC™-3 | SMC™ Dialog Plus | STC™ | |
| 200…690V 1…1250 A |
200…600V 1…480 A |
200…600V 1…1000 A |
100…240V 1Æ, 1…22 A |
200…600V 3Æ, 1…22 A |
|
| Soft Start | S | S | S | S | S |
| Kickstart | S | S | S | — | — |
| Current Limit | S | S | S | — | — |
| Dual Ramp Start | S | — | S | — | — |
| Full Voltage | S | — | S | — | — |
| Energy Saver | — | — | S | — | — |
| Soft Stop | S | S | O | — | — |
| Pump Control | O | — | O | — | — |
| Preset Slow Speed | S | — | O | — | — |
| Linear Acceleration/Deceleration | S | — | — | — | — |
| Torque Control | — | — | — | — | — |
| SMB™ Smart Motor Braking | O | — | O | — | — |
| Accu-Stop™ | O | — | O | — | — |
| Slow Speed with Braking | O | — | O | — | — |
| Integrated Bypass Contactor | S | S | NA♠ | — | — |
| Integrated Motor Overload Protection | S | S | S | — | — |
| Single-phase Operation | — | — | — | S | — |
| DPI Communication | S | — | — | — | — |
| Metering | S | — | S | — | — |
| Real Time Clock | — | — | — | — | — |
| Motor Winding Heater Function | ‡ | — | — | — | — |
| Diagnostic Faults and Alarms | S | — | — | — | — |
| Motor and Starter | — | — | — | — | — |
| Individual Bit Enable of Faults and Alarms | — | — | — | — | — |
| Automatic Tuning of Motor Parameters | — | — | — | — | — |
| Parameter Configuration/Programming | S | — | S | — | — |
| Human Interface Module (HIM) | O | — | — | — | — |
| Parameter Configruation Module | — | — | — | — | — |
| Configuration Software: Drives Explorer and Drives Executive | O | — | — | — | — |
| Digital I/O Expansion Module§ ♣ | — | — | — | — | — |
| Ground Fault/CT/PTC Module§ | — | — | — | — | — |
| Network Communications | O | — | — | — | — |
| Inside Delta Connection | S | S | — | — | — |
| Standards Compliance: CE Marked per Low Voltage Directive 73/23/EEC, 93/68/EEC CSA Certified (File No. LR 1234) UL Listed (File No. E96956) |
S | S | S | S | S |
| S = Standard Feature O = Optional Feature |
|||||
| ⋆ Starter does not include a configuration device as standard. | |||||
| ‡ Option using a Bulletin 1410 motor winding heater. | |||||
| § With removable terminal block. | |||||
| ♣ Starter ships with 2 DC inputs and 2 relay outputs as standard. | |||||
| ♠ The starter is fully solid-state (no integral bypass). An external bypass contactor can be added as an option. | |||||
| & Note: Information for this product line is available on the Industrial Controls catalog web site: www.ab.com/catalogs. | |||||
| ∆ Note: Information for this product line is available in publication 150-SG010* or on the Industrial Controls catalog web site: www.ab.com/catalogs. | |||||