Catalogs >
Industrial Controls Catalog >
Relays, Timers, and Temperature Controllers >
Single Loop Temperature/Heater Controllers >
Bulletin 900-TC
Bulletin 900-TC
Approximate Dimensions
Approximate dimensions are shown in millimeters unless otherwise indicated. Dimensions are not to be used for manufacturing purposes.
Bulletin 900-TC8
Panel Cutouts
|
|
- Recommended panel thickness is 1…8 mm.
- Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between controllers when they are group mounted. UL Type 4X is not possible when group mounting.)
- To mount the unit so that it is waterproof, apply the waterproof gasket to the unit
- When two or more units are mounted together, make sure that the surrounding ambient temperature does not exceed the allowable operating temperature specification.
Safety Terminal Cover⋆
Bulletin 900-TC16
Panel Cutouts
|
|
- Recommended panel thickness is 1…5 mm.
- Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers when they are group mounted. IP66 UL Type 4X is not possible when group mounting.)
- To mount the unit so that it is waterproof, apply the waterproof gasket to the unit.
- When two or more units are mounted together, make sure that the surrounding ambient temperature does not exceed the allowable operating temperature specification.
Safety Terminal Cover⋆
⋆ Conforms to VDE 0106 (finger protection) when installed on the controller.
Approximate dimensions are shown in millimeters unless otherwise indicated. Dimensions are not to be used for manufacturing purposes.
Bulletin 900-TC32
Panel Cutouts
|
|
- Recommended panel thickness is 1…5 mm.
- When carrying out maintenance on the unit, the I/O wiring terminal block can be removed from the module with the terminal leads still attached.
- Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between controllers when they are group mounted. IP66 UL Type 4X is not possible when group mounting.)
- To mount the unit so that it is waterproof, apply the waterproof gasket to the unit.
- When two or more units are mounted together, make sure that the surrounding ambient temperature does not exceed the allowable operating temperature specification.
Current Transformer (Sold Separately) (Bulletins 900-TC8 and 900-TC16 Only)
Cat. No. 900-CT1
|
|
Cat. No. 900-CT2
|
|
Note:The hole diameter is the major functional difference between Cat. Nos. 900-CT1 and 900-CT2. The current output signal is the same.
| Ratings
|
| Dielectric Strength
|
1000V AC for 1 min.
|
| Vibration Resistance
|
50 Hz, 98 m/s2
|
| Weight
|
900-CT1: Approx. 11.5 g, 900-CT2: Approx. 50 g
|
|
|
900-CT1 Thru-current (Io) vs. Output Voltage (Eo) Reference Values
900-CT2 Thru-current (Io) vs. Output Voltage (Eo) Reference Values
