Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > Solid-State Relays > Bulletin 700-SK Slim Line Relay
Bulletin 700-SK Slim Line Relay
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
Input Sensor Module
| Input Sensor Ratings | |||||
| Cat. No. | Rated Input Voltage | Max. Operating Input Voltage Range | Input Current | Pick-up Voltage | Drop-out Voltage |
| 700-SKICZ24 | 12…24V DC | 6.6…32V DC | 8 mA max. | 6.6V DC max. | 3.6V DC min. |
| 700-SKICA18 | 100…240V AC | 60…264V AC | 15 mA max. | 60V AC max. | 20V AC min. |
| Output Logic Ratings | ||
| Cat. No. | Logic Level Supply Voltage | Logic Level Supply Current Draw |
| 700-SKICZ24 | 4…32V DC | 0.1…100 mA |
| 700-SKICA18 | ||
| Characteristics | |||
| Description | Cat. No. 700-SKICA18 | Cat. No. 700-SKICZ24 | |
| Pick-up time | 20 ms max. | 0.1 ms max. | |
| Drop-out time | 20 ms max. | 0.1 ms max. | |
| Response frequency | 10 Hz | 1 kHz | |
| Output ON voltage drop | 1.6V max. | ||
| Leakage current | 5 mA max. | ||
| Output VDRM, VCEO (V) | 80 (ref. value) | 80 (ref. value) | |
| Output di/dt (A/uS) | — | — | |
| Output dv/dt (V/uS) | — | — | |
| Output I2t (A2S) | — | — | |
| Output Tj (°C) Max. | 150 | 150 | |
| Insulation Resistance | 100 MW min. between input and output | ||
| Dielectric Strength | 4000V AC, 50/60 Hz for 1 min between input and output | ||
| Vibration Resistance (Max.) | 10…55 Hz, 1.5 mm double amplitude (10 G) | ||
| Shock Resistance (Max.) | 1000 m/s2 (100 G) | ||
| Ambient Temperature | Operating | –30…+80 °C (–22…+176 °F) with no icing or condensation | |
| Storage | –30…+100 °C (–22…+212 °F) with no icing or condensation | ||
| Standards Compliance | UL 508, CSA C22.2 No. 14, EN/IEC 60950 | ||
| Certifications | cURus Recognized (File No. E96956, Guide NMFT2/NMFT8), CE Marked, TÜV Certified | ||
| Ambient humidity Operating | 45…85% (no condensation) | ||
| Weight | Approx. 18 g | ||
Output SSR Module
| Control/Input Ratings | ||||||
| Cat. No. | Rated Control Voltage | Max. Operating Control Voltage Range | Max. Reverse Control Voltage |
Impedance⋆ | Pick-up Voltage |
Drop-out Voltage |
| 700-SKOZ2Z25 | 5…24V DC | 4…32V DC | -32V DC | 15 mA max. at 25 °C (77 °F) |
4V DC max. |
1V DC min. |
| 700-SKON2Z25 | ||||||
| 700-SKOC2Z25 | 8 mA max. | |||||
| 700-SKOC1Z25 | ||||||
| Load/Output Ratings | |||||
| Cat. No. |
Rated Load Voltage | Maximum Load Voltage Range |
Continuous Load Current (Resistive) [A] | Max. Inrush Current‡ | |
| Min. | Max.§ | ||||
| 700-SKOZ2Z25 | 100…240V AC | 75…264V AC | 0.05 | 2 | 30 A (@50/60 Hz, 1 cycle) |
| 700-SKON2Z25 | |||||
| 700-SKOC2Z25 | 5…48V DC | 4…60V DC | 0.1 | 2 | 8 A (10 ms) |
| 700-SKOC1Z25 | 48…200V DC | 40…200V DC | 0.1 | 1.5 | 8 A (10 ms) |
| ⋆ With a constant current input system. SSR impedance varies with a change in input voltage. | |||||
| ‡ If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to the “Inrush Current Resistivity” graphs on Inrush Current Resistivity‡ for more details. | |||||
| § Refer to "Load Current vs. Ambient Temperature Characteristics" graphs on Inrush Current Resistivity‡ for additional details. | |||||
Output Module, Continued
| Characteristics | |||||
| Description | Cat. No. 700-SKOZ2Z25 | Cat. No. 700-SKON2Z25 | Cat. No. 700-SKOC2Z25 | Cat. No. 700-SKOC1Z25 | |
| Load Switching Method/Device | Triac | Transistor | |||
| Pick-up Time | 1/2 cycle of load power source cycle time⋆ + 1 ms max. | 1 ms max. | |||
| Drop-out Time | 1/2 of load power source cycle time⋆ + 1 ms max. | 2 ms max. | |||
| Response Frequency | 20 Hz | 100 kHz | |||
| Output ON Voltage Drop | 1.6V max. | 2.5V max. | |||
| Leakage Current | 1.5 mA max. | 1 mA max. | |||
| Output VDRM, VCEO (V) | 600 (ref.value) | 600 (ref.value) | 80 (ref.value) | 400 (ref.value) | |
| Output di/dt (A/uS) | 30 | 30 | — | — | |
| Output dv/dt (V/uS) | 300 | 300 | — | — | |
| Output I2t (A2S) | 10.4 | 10.4 | — | — | |
| Output Tj (°C) Max. | 125 | 125 | 150 | 150 | |
| Insulation Resistance | 100 MW min. between input and output | ||||
| Dielectric Strength | 4000V AC, 50/60 Hz for 1 min between input and output | ||||
| Vibration Resistance (Max.) | 10…55 Hz, 1.5 mm double amplitude (10 G) | ||||
| Shock Resistance (Max.) | 1000 m/s2 (100 G) | ||||
| Ambient Temperature | Operating | –30…+80 °C (–22…+176 °F) with no icing or condensation | |||
| Storage | –30…+100 °C (–22…+212 °F) with no icing or condensation | ||||
| Standards Compliance | UL 508, CSA C22.2 No. 14, EN/IEC 60950 | ||||
| Certifications | cURus Recognized (File No. E96956, Guide NMFT2/NMFT8), CE Marked, TÜV Certified | ||||
| Ambient Humidity Operating | 45…85% (no condensation) | ||||
| Weight | Approx. 18 g | ||||
| ⋆ 60 Hz cycle time = 16.6 ms, 50 Hz cycle time = 20 ms. | |||||
Load Current vs. Ambient Temperature Characteristics
|
Inrush Current Resistivity‡
|
‡ Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR.