Solid-State Relays

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > Solid-State Relays > Bulletin 700-SF Square Base Relay

Bulletin 700-SF Square Base Relay

Specifications

Control/Input Ratings
Cat. No.	Rated Control Voltage	Max. Operating Control Voltage Range [V DC]	Max. Reverse Control Voltage [V]	Impedance	Control Voltage Levels
					Pick-up Voltage	Drop-out Voltage
700-SFZY3Z25	5…24V DC	4…28V DC	–32	15 mA max.¬	4V DC max.	1V DC min.
700-SFTY3Z24	24V DC	19.2…28.8V DC	–28.8	2 kW ± 20%	19.2V DC max.	1V DC min.
700-SFNY3Z25	5…24V DC	4…28V DC	–28.8	1.5 kW + 20%/–10%T	4V DC max.	1V DC min.
¬  With constant current input circuit system, SSR impedance varies with a change in input voltage.
T  Input impedance reaches its maximum at the operating voltage.

Load/Output Ratings
Cat. No.	Rated Load Voltage	Max. Load Voltage Range	Continuous Load Current (Resistive) [A]		Max. Inrush Current‡
			Min.	Max.§
700-SFZY3Z25	100…240V AC	75…264V AC	0.1	3	45 A @ 50/60 Hz, 1 cycle
700-SFTY3Z24			0.1	3
700-SFNY3Z25	4…48V DC	3…52.8V DC	0.1	3	18 A (10 ms)
‡  If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to the “Inrush Current Resistivity” graphs on page 50 for more details.
§  Refer to "Load Current vs. Ambient Temperature Characteristics" on page 50 for additional load current details.

Characteristics
Description	Cat. No. 700-SFZY3Z25	Cat. No. 700-SFTY3Z24	Cat. No. 700-SFNY3Z25
Load Switching Method/Device	Triac	Transistor
Pick-up Time	1/2 cycle of load power source cycle time §  + 1 ms max.	1 ms max.	0.5 ms max.
Drop-out Time	1/2 cycle of load power source cycle time§  + 1 ms max.		2 ms max.
Output ON Voltage Drop	1.6V (RMS) max.		1.5V max.
Output Leakage Current	5 mA max. (@ 100 V AC); 10 mA max. (@ 200 V AC)	2.5 mA max. (@ 100V AC); 5 mA max. (@ 200V AC)	5 mA max. (@ 50V DC)
Output VDRM, VCEO (V)	600	600	80
Output di/dt (A/uS)	50	50	—
Output dv/dt (V/uS)	250	250	—
Output I2t (A2S)	18	18	—
Output Tj (°C) Max.	125	125	150
Insulation Resistance	100 MW min. (at 500V DC)
Dielectric Strength	1,500V AC, 50/60 Hz for 1 min
Vibration Resistance (Max.)	10…55 Hz, 1.5 mm double amplitude (10 G)
Shock Resistance (Max.)	1000 m/s2 (100 G)
Ambient Temperature	Operating: –30…+80 °C (–22…+176 °F) with no icing or condensation Storage: –30…+100 °C (–22…=212 °F) with no icing or condensation
Ambient Humidity	45…85% (no condensation)
Standards Compliance	UL 508, CSA C22.2 No. 14, EN/IEC 60947-1, -4-3, EN/IEC 60950
Certifications	cURus Recognized (File No. E96956, Guide NMFT2/NMFT8), CE Marked, VDE Certified
Weight	Approx. 50 g
§ 60 Hz full cycle time = 16.6 ms, 50 Hz full cycle time 20 ms

Note:These data are non-repetitive. Keep the inrush current to half the rated value if it occurs repetitively. Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR.

Load Current vs. Ambient Temperature Characteristics

700-SF…



Inrush Current Resistivity¬ 

700-SFZ… 700SFT…



Inrush Current Resistivity¬ 

700-SFN…

¬ Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR.