Bulletin 700-HA Tube Base Relay

Bulletin 700-HA — Tube Base Relay

10 A contact rating
DPDT, 3PDT
Pin-style terminals
Standard ON/OFF flag indicator
Options: LED, push-to-test and manual override, socket-mounted surge suppressor module, or multi-function timer
Contact choices: standard silver nickel, bifurcated silver nickel, or bifurcated with gold plating

Standards Compliance and Certifications

See Specifications.

Product Selection

Bulletin 700-HA Tube Base Relay with PIN Terminals (Single Contact) —
Mechanical ON/OFF Indicator included⋆

	Description	Contact Rating	Wiring Diagrams		Coil Voltage	Cat. No.‡ § ♣
	Description	Contact Rating	U.S./Canada	International	Coil Voltage	Cat. No.‡ § ♣
	DPDT 2-pole 2 Form C Single AgNi Contact	10 A B300			6V AC	700-HA32A06
					12V AC	700-HA32A12
					24V AC	700-HA32A24
					120V AC	700-HA32A1
					240V AC	700-HA32A2
					277V AC	700-HA32A27♦
					6V DC	700-HA32Z06
					12V DC	700-HA32Z12
					24V DC	700-HA32Z24
					36V DC	700-HA32Z36
					48V DC	700-HA32Z48
					60V DC	700-HA32Z60
					80V DC	700-HA32Z80
					110V DC	700-HA32Z1
					125V DC	700-HA32Z01
	Sockets		700-HN125	700-HN100 700-HN204	140V DC	700-HA32Z3
	Sockets		700-HN125	700-HN100 700-HN204	220V DC	700-HA32Z2♦
	3PDT 3-pole 3 Form C Single AgNi Contact	10 A B300			6V AC	700-HA33A06
					12V AC	700-HA33A12
					24V AC	700-HA33A24
					120V AC	700-HA33A1
					240V AC	700-HA33A2
					6V DC	700-HA33Z06
					12V DC	700-HA33Z12
					24V DC	700-HA33Z24
					48V DC	700-HA33Z48
					60V DC	700-HA33Z60
					80V DC	700-HA33Z80
					110V DC	700-HA33Z1
					125V DC	700-HA33Z01
	Sockets		700-HN126	700-HN101 700-HN205	140V DC	700-HA33Z3
	Sockets		700-HN126	700-HN101 700-HN205	220V DC	700-HA33Z2♦

⋆ For Time Modules and Surge Suppressor Modules, see Accessories.
‡ LED Option: Add suffix (-4) to the selected Bulletin 700-HA Relay Cat. No., except for the 240V AC Units, add (-4L).
§ Push-to-test, Manual Override, and LED Option: Add suffix (-3-4) to the selected Bulletin 700-HA Relay Cat. No., except for the 240V AC units, add (-3-4L).
♣ Push-to-test and Manual Override option: Add suffix (-3) to the selected Bulletin 700-HA relay.
♦ LED not available for 220V DC and 277V AC coils.

Bulletin 700-HAX Tube Base Relay with PIN Terminals (Bifurcated Contacts with Gold Overlay) —
Mechanical ON/OFF Indicator Included⋆

	Description	Contact Rating	Wiring Diagrams		Coil Voltage	Cat. No.‡ § ♣
			U.S./Canada	International
	DPDT 2-Pole 2 Form C Bifurcated AgNi Contacts with Gold Overlay	6 A			6V AC	700-HAX2A06
					12V AC	700-HAX2A12
					24V AC	700-HAX2A24
					120V AC	700-HAX2A1
					240V AC	700-HAX2A2
					277V AC	700-HAX2A27∆
					6V DC	700-HAX2Z06
					12V DC	700-HAX2Z12
					24V DC	700-HAX2Z24
					36V DC	700-HAX2Z36
					48V DC	700-HAX2Z48
					110V DC	700-HAX2Z1
	Sockets		700-HN125	700-HN100 700-HN204	125V DC	700-HAX2Z01
					140V DC	700-HAX2Z3
	3PDT 3-Pole 3 Form C Bifurcated AgNi Contacts with Gold Overlay	6 A			6V AC	700-HAX3A06
					12V AC	700-HAX3A12
					24V AC	700-HAX3A24
					120V AC	700-HAX3A1
					240V AC	700-HAX3A2
					6V DC	700-HAX3Z06
					12V DC	700-HAX3Z12
					24V DC	700-HAX3Z24
					48V DC	700-HAX3Z48
					110V DC	700-HAX3Z1
	Sockets		700-HN126	700-HN101 700-HN205	125V DC	700-HAX3Z01
					140V DC	700-HAX3Z3

⋆ For Time Module and Surge Suppressor Module, see Accessories.
‡ LED Option: Add suffix (-4) to the selected Bulletin 700-HAX Relay Cat. No., except for the 240V AC Units, add (-4L).
§ Push-to-test and LED Option: Add suffix (-3-4) to the selected Bulletin 700-HAX Relay Cat. No., except for the 240V AC units, add (-3-4L).
♣ Push-to-test and Manual Override option: Add suffix (-3) to the selected Bulletin 700-HA relay.
∆ LED not available.

Accessories

	Description	Pkg. Qty.	Cat. No.
	Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HX Timing Relays, -HT (On-Delay) and -HRM, -HRC and -HV (Repeat Cycle) Timing Relays.	10	700-HN100
Cat. No. 700-HN100
	Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Open Style Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HT (On-Delay) and -HRM, -HRC, and -HV (Repeat Cycle) Timing Relays. No retainer clip required.	10	700-HN125
Cat. No. 700-HN125
	Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting; Guarded Terminal Construction. 11-pin for use with 3PDT 700-HA relays.	10	700-HN101
Cat. No. 700-HN101
	Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting; Open Style Terminal Construction. 11-pin for use with 3PDT 700-HA relays. No retainer clip required.	10	700-HN126
Cat. No. 700-HN126
	8-Pin Socket — Can Be Used With or Without Timing Attachment or Surge Suppressor Screw Terminal Tube Base Sockets — panel or DIN Rail mounting. Guarded terminal construction. Used with DPDT Bulletin 700-HA Relays.	10	700-HN204
	11-Pin Socket — Can Be Used With or Without Timing Module or Surge Suppressor. Screw Terminal Tube Base Sockets — panel or DIN Rail mounting. Guarded terminal construction. Used with 3PDT Bulletin 700-HA relays.	10	700-HN205
Cat. No. 700-HN205
	DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m	10	199-DR1
Cat. No. 199-DR1

	Description		Pkg. Qty.	Cat. No.
	Diode Surge Suppressor⋆ Voltage Range: 6…220V DC used with 700-HN204 and 700-HN205 socket		10	700-ADR
	Diode with LED Surge Suppressor⋆ Voltage Range: 6…24V DC used with 700-HN204 and 700-HN205 socket		10	700-ADL1R
	Diode with LED Surge Suppressor⋆ Voltage Range: 28…60V DC used with 700-HN204 and 700-HN205 socket		10	700-ADL2R
	Diode with LED Surge Suppressor⋆ Voltage Range: 110…220V DC used with 700-HN204 and 700-HN205 socket		10	700-ADL3R
	Varistor with LED Surge Suppressor⋆ Voltage Range: 6…24V AC used with 700-HN204 and 700-HN205 socket		10	700-AV1R
	Varistor with LED Surge Suppressor⋆ Voltage Range: 110…240V AC used with 700-HN204 and 700-HN205 socket		10	700-AV3R
	RC Surge Suppressor⋆ Voltage Range: 6…24V AC/DC used with 700-HN204 and 700-HN205 socket		10	700-AR1
	RC Surge Suppressor⋆ Voltage Range: 110…240V AC/DC used with 700-HN204 and 700-HN205 socket		10	700-AR2
	Timing Module On-Delay or One-Shot selectable voltage range: 12…24V AC/DC used with sockets that accept plug-in accessory modules.		1	700-AT3
	Timing Module On-Delay or One-Shot selectable voltage range: 110…125V AC used with sockets that accept plug-in accessory modules.			700-AT3A1
	Timing Module On-Delay or One-Shot selectable voltage range: 230…240V AC used with sockets that accept plug-in accessory modules.			700-AT3A2
	Multi-Function Multi-Range Time Module⋆ Voltage range 12…240V AC 50/60 Hz and 12…240V DC, with a voltage variation of 85…110%. Repeat accuracy of ±1%. Reset time <50 ms. Refer to Specifications for Specifications.		1	700-HT3
	Eight Timing Modes Seven Timing Ranges as follows:
	1. 1 s	0.05 s…1 s
	2. 10 s	0.5 s…10 s
	3. 100 s	5 s…100 s
	4. 10 min	0.5 min…10 min
	5. 100 min	5 min…100 min
	6. 10 hours	0.5 h…10 h
	7. 100 hours	5 h…100 h
Cat. No. 700-HT3	8. LED Indicator

⋆ Suppressors and Time Modules easily plug into sockets (Cat. Nos. 700-HN204 and 700-HN205). For use with Bulletin 700-HA relays.

ATTENTION: Cat. No. 700-HT3 is wired with signal “S” connected to “A1”. See wiring diagram marked on the timer module.

	Description	Pkg. Qty.	Cat. No.
	Retainer Clip for Cat. Nos. 700-HN100, -HN101, -HN204, and -HN205 Sockets with Bulletin 700-HA Relays⋆ Secures relay in socket.	10	700-HN157
Sample Retainer Clips
	Relay Identification Snap-in Markers§ Snap-in markers fit on top of product covers. Squares slip into molded slot on top of product cover.	5	1492-MS5X12
			1492-MS6X9
			1492-MS6X12
			1492-MS8X9
			1492-MS8X12
			1492-MP-Blank
Snap-in markers
	Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays.	10	700-N40
	Blank Identification Tags — contains 10 sheets of blank identification tags for customer specialized printing. Each sheet contains 546 blank tags. Tags are peel-off with sticky backing for easy placement on relays.	10	700-N41

⋆ See Bulletin 700-HA Relay, Socket, and Retainer Clip Reference Chart below.
§ For pre-printed marker cards, turn to the following 1492 sections (tab 12, under IEC Terminal Block Accessories): 1492-SM5X12_, 1492-SM6X9_,1492-SM8X9_,1492-SM8X12_,1492-MP_.

Relay Type	Socket	Retainer Clip
700-HA32 700-HAB2 700-HAX2	700-HN100 700-HN125 700-HN204 700-HN200	700-HN157 Not Required♣ 700-HN157 700-HN157
700-HA33 700-HAB3 700-HAX3	700-HN201 700-HN101 700-HN126 700-HN205	700-HN157 700-HN157 Not Required♣ 700-HN157

♣ Design of these sockets holds the relays securely and does not require retainer clips.

Specifications

Cat. No. 700-HA…
Electrical Ratings
Pilot Duty Rating‡		NEMA B300
Rated Thermal Current (I_th )		HA = 10 A – 120V, 240V HAX = 6 A – 120V, 240V
Rated Insulation Voltage (U_i)		250V IEC – 300V UL/CSA
Contacts	Inductive	Make	Break	Hp

	120V AC	30 A	3 A	1/3
	240V AC	15 A	1.5 A	1
	General Purpose	10 A, 240V AC
	Resistive	10 A, 30V DC
Min. Low Energy Permissible Load		HA = 10V, 5 mA HAX = 5V, 2 mA
Permissible Coil Voltage Variation		Pickup: 80…110% of Nominal Voltage at 50 Hz 80…110% of Nominal Voltage at 60 Hz 80…110% of Nominal Voltage at DC
Coil Consumption ±10%	AC Coils	50 Hz	60 Hz
	Inrush	3.3 VA	2.85 VA
	Sealed	2.2 VA	1.9 VA
	DC Coils	1.3 W
Must Dropout Voltage		20% of nominal V AC
		10% of nominal V DC
Max. Contact Resistance		50 MW (700-HA and 700-HAB) 30 MW (700-HAX)
Design Specification/Test Requirements
Electrical
Pole-to-Pole		1000V
Contact to Coil		3600V
Contact to Frame		4000V
Electrical Life (Operating)		100 000 min.
Mechanical
Degree of Protection (Open Type) IEC 529		IP 40
Mechanical Life Cycles (AC/DC)		> 20 x 10⁶/ 50 x 10⁶
Switching Frequency Operations		3600/HR
Coil Voltages		See Product Selection
Operating Time	Max. Pickup	10 ms
	Max. Dropout	10 ms
Maximum Operating Rate		4 Ops/s
Vibration	Endurance	5 G
	Operational	2.5 G
Shock	Endurance	50 G
	Operational	9 G
Environmental
Temperature	Operating	AC/DC	–40…+70 °C
	Storage	AC/DC	–40…+100 °C
Altitude		2000 m (6560 ft)
Construction
Insulating Material		Molded High-Dielectric Material
Enclosure		Transparent Dust Cover
Contact Material		700-HA:	10 A– AgNi
		700-HAX:	6 A–Bifurcated/Gold Plating AgNi
Terminal Markings on Socket		In accordance with EN50 0005
Sockets		8-Pin Socket — 700-HN100, -HN125, -HN204 11-Pin Socket — 700-HN101, -HN126, -HN205
Certifications		cURus Recognized (File No. E3125, Guide NLDX2/NLDX8), cULus Listed when used with Bulletin 700-HN sockets noted above (File No. E3125, Guide NLDX/NLDX7), CE Marked, CSA Certified, UR Certified (File 229473)
Standards		UL508, CSA C22.2 No. 14, EN 61810-1, EN 60255-23

⋆ See Performance Data.
‡ NEMA Rating Chart is in publication 700-SG003*

700-HA Relay Performance Graphs

Contact life vs. AC1 load at 1,800 cycles/h	Breaking capacity for DC1 load at 1,800 cycles/h.	Load reduction factor vs. cos f
	A = load applied to one contact B = load applied to two contacts in series C = load applied to three contacts in series

Time Module Cat. No. 700-HT3
Electrical Ratings
Operating Voltage Range		12…240V AC (50/60 Hz) 12…240V DC
Power Consumption		0.1 W (12V) 1.0 W (230V)
Mechanical
Degree of Protection of Input (B1) Terminal		IP 20 (Guarded Terminal)
Input Terminal Wire Range		1.0 x 0.2 mm²…2.5 mm² (24 AWG…14 AWG) 2.0 x 0.2 mm²…1.5 mm² (24 AWG…16 AWG)
Input Terminal Torque Range		0.45…0.8 Nm (4…7 lb-in.)
LED Indicator		Red
Repeat Accuracy‡		±1%
Recovery Time		<50 ms
Selectable Timing Ranges		Three DIP switches, seven ranges (set from 5…100% of range): 1 s, 10 s, 100 s, 10 min, 100 min, 10 h, 100 h
Selectable Timing Modes		Three DIP switches, eight modes: 1. Power On–Delay 2. Power On One-Shot 3. Power On Repeat Cycle, On Start 4. Signal On-Delay and Signal Off-Delay 5. Signal Off-Delay 6. Signal On-One-Shot 7. Signal Off-One-Shot 8. Signal On and Signal Off Watchdog Monitor
Adjustable Trimmer Scale Accuracy		±5% of Time Range
Environmental
Temperature	Operating	–20 °C…+50 °C (–4 °F…+122 °F)
	Storage	–55 °C…+85 °C (–67…+185 °F)
Altitude		2000 m (6560 ft)
Construction
Enclosure		Gray Plastic Housing
Mounting with Socket Only		8- or 11-Pin Socket with Module Plug
Sockets		700-HN204 (8-Pin with Plug) 700-HN205 (11-Pin with Plug)
Certifications		cURus Recognized (File No. E14843, Guide NRNT2/NRNT8), CE Marked
Standards		UL508, CSA C22.2 No. 14, EN 61810-1, EN 60255-23

⋆ Performance Data - See this publication, ImportantPerformance Data.
‡ At constant voltage and temperature.

Timing Charts, Cat. No. 700-HT3 Multi-Function Time Module (t = Time Range 0.05 s…100 h)

Terms:
U is Power Input
R is Relay Output
S Signal, +A1 Socket, B1 Timer
t is the resulting Time Delay (Red LED)

1. Power On-Delay

Apply power (U) to timer. Relay contacts (R) change state after time delay (t) is complete. Contacts return to their shelf state when power is removed. Terminal B1 is not used in this mode.

2. Power On One-Shot

Apply power (U) to timer. Relay contacts (R) change state immediately and the time delay begins. When the time delay (t) is complete, contacts return to their shelf state. Contacts return to their shelf state when power is removed. Terminal B1 is not used in this mode.

3. Power On Repeat Cycle, On Start

Apply power (U) to timer. Relay contacts (R) change state immediately and the time delay (t) begins. When the time delay is complete, the contacts return to their shelf state for time delay (t) (time on = time off). This cycle will repeat until the power is removed. Terminal B1 is not used in this mode.

4. Signal On-Delay and Signal Off-Delay

Apply power (U) to timer. When the signal (S) is closed the time delay (t) begins, after the time delay is complete the relay contacts (R) change state. Opening the signal starts the time delay, after the time delay is complete the contacts return to their shelf state. If the signal is closed or opened before the time delay is complete, the time delay is reset. Contacts return to their shelf state when power is removed.

Cat. No. 700-HT3 Timing Modes, Time Description, Timing Charts, and DIP Switch Selections

5. Signal Off-Delay

Apply power (U) to timer. When the signal (S) is closed, the relay contacts (R) change state immediately. When the signal is opened, the time delay (t) begins. If the signal is closed before the time delay is complete, the time delay is reset and the relay remains energized. When the time delay is complete, the contacts return to their shelf state. Contacts return to their shelf state when power is removed.

6. Signal On One-Shot

Apply power (U) to timer. When the signal (S) is closed, the relay contacts (R) change state immediately and the time delay (t) begins. After the time delay begins, opening or closing the signal will not reset the time delay. When the time delay is complete, the contacts return to their shelf state. Contacts return to their shelf state when power is removed.

7. Signal Off One-Shot

Apply power (U) to timer. When the signal (S) is closed and then opened, the relay contacts (R) change state immediately and the time delay (t) begins. After the time delay begins, opening or closing the signal will not reset the time delay. When the time delay is complete, the contacts return to their shelf state. Contacts return to their shelf state when power is removed.

8. Signal On and Signal Off Watchdog Monitor

Apply power (U) to timer. When the signal (S) is closed, the relay contacts (R) energize immediately and the time delay (t) begins. If the signal is opened before the time delay is complete, the relay remains energized and the time delay is reset. When the time delay is complete the contacts return to their shelf state. If the signal is opened after the time delay is complete, the relay contacts energize immediately and the same time delay begins. Continuous cycling of the signal at a rate that is faster than the time delay will cause the relay contacts to remain energized. Contacts return to their shelf state when power is removed.

Approximate Dimensions

Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes.

Bulletin 700-HA Relay

Cat. No. 199-DR1 DIN Mounting Rail Series BCat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes

Cat. No.	A	B	C	D	Approx. Shipping Wt.
199-DR1	35 (1-3/8)	27 (1-1/16)	7.5 (19/64)	1.02 (1/64)	1.85 kg (4.07 lb) (10/pkg)
199-DR4	35 (1-3/8)	27 (1-1/16)	15 (19/32)	2.3 (3/32)	3.68 kg (8 lb) (5/pkg)

Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes.

Cat. No. 700-HN100
Panel Mounting

Wire Size: 2 x 2.5 mm²
Single Wire – Up to #12 AWG
Double Wire – 2 x 2.5 mm² (#2-14 AWG… #2-20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)

Cat. No. 700-HN125

Wire Size: 2 x 2.5 mm²
Single Wire – Up to 12 AWG
Double Wire – 2 x 2.5 mm² (#2–14 AWG…#2–20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)

Cat. No. 700-HN101
Panel Mounting

Wire Size: 2 x 2.5 mm²
Single Wire – Up to #12 AWG
Double Wire – 2 x 2.5 mm² (#2–14 AWG…#2–20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)

Cat. No. 700-HN126

Wire Size: 2 x 2.5 mm²
Single Wire – Up to #12 AWG
Double Wire – 2 x 2.5 mm² (#2–14 AWG…#2–20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)

Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes.

Cat. No. 700-HN204

Wire Size: 2 x 2.5 mm²
Single Wire – Up to #12 AWG
Double Wire – 2 x 2.5 mm² (#2–14 AWG… #2–20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)

Cat. No. 700-HN205

Wire Size: 2 x 2.5 mm²
Single Wire – Up to #12 AWG
Double Wire – 2 x 2.5 mm² (#2–14 AWG …#2–20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)

Cat. No. 700-HT3

Wire Size: 2 x 1.5 mm² (#2 – 16 AWG…#1–20 AWG)
(Either Solid or Stranded)
Strip Length: 9 mm (3/8 in.) – Torque: 0.8 N•m (7 lb•in)