Bulletin 700-HP PCB "Pin" Style Relay

Bulletin 700-HP (PCB) "Pin Style” Relay

8 A contact ratings
DPDT/ (2 c/o) contacts
Plug-in PIN style (PCB) terminals (5 mm pinning)
Choice of standard silver nickel contacts, or silver nickel with gold-plated contacts

Standards Compliance and Certifications

See Specifications.

Product Selection

Slim Line Relay with "PIN Style" Terminations

	Description	Contact Rating	Wiring Diagrams		Coil Voltage	Package Quantity	Cat. No.
	Description	Contact Rating	U.S./Canada	International	Coil Voltage	Package Quantity	Cat. No.
	DPDT 2-Pole 2 Form C AgNi + Au Gold Plated Contacts	8 A			6V AC	10	700-HPX2A06
					12V AC	10	700-HPX2A12
					24V AC	10	700-HPX2A24
					120V AC	10	700-HPX2A1
					240V AC	10	700-HPX2A2
					6V DC	10	700-HPX2Z06
					12V DC	10	700-HPX2Z12
					24V DC	10	700-HPX2Z24
					48V DC	10	700-HPX2Z48
	Sockets				110V DC	10	700-HPX2Z1
	DPDT 2-Pole 2 Form C AgNi Contacts				6V AC	10	700-HP32A06
					12V AC	10	700-HP32A12
					24V AC	10	700-HP32A24
					120V AC	10	700-HP32A1
					240V AC	10	700-HP32A2
					6V DC	10	700-HP32Z06
					12V DC	10	700-HP32Z12
					24V DC	10	700-HP32Z24
					48V DC	10	700-HP32Z48
Bulletin 700-HP DPDT	Sockets		700-HN123	700-HN123	110V DC	10	700-HP32Z1

Accessories

	Description	Pkg. Quantity	Cat. No.
	Diode Surge Suppressor Voltage Range: 6…220V DC used with 700-HN123 socket	10	700-ADR
	Diode with LED Surge Suppressor Voltage Range: 6…24V DC used with 700-HN123 socket	10	700-ADL1R
	Diode with LED Surge Suppressor Voltage Range: 28…60V DC used with 700-HN123 socket	10	700-ADL2R
	Diode with LED Surge Suppressor Voltage Range: 110…220V DC used with 700-HN123 socket	10	700-ADL3R
	Diode with LED Surge Suppressor Voltage Range: 6…24V AC used with 700-HN123 socket	10	700-AV1R
	Varistor with LED Surge Suppressor Voltage Range: 110…240V AC used with 700-HN123 socket	10	700-AV3R
	RC Surge Suppressor Voltage Range: 6…24V AC/DC used with 700-HN123 socket	10	700-AR1
	RC Surge Suppressor Voltage Range: 110…240V AC/DC used with 700-HN123 socket	10	700-AR2
	Timing Module On-Delay or One-Shot selectable voltage range: 12…24V AC/DC used with Bul. Nos. 700-HN123 socket.	1	700-AT3

Cat. No. 700-AT3
	Screw Terminal Socket — Panel or DIN Rail Mounting 8-pin miniature socket for use with 2-pole, Bulletin 700-HP relays. Incorporates coil and contact separation.	10	700-HN123
Cat. No. 700-HN123
	8-Way Jumper can be cut to required length. Rated 10 A – 250V	1	Color	Cat. No.
			Red	700-HN180R
			Gray	700-HN180G
Cat. No. 700-HN180			Blue	700-HN180B
	DIN (#3) Symmetrical Rail 35 x 7.5 x 1 m	10	199-DR1
Cat. No. 199-DR1
	Plastic Retainer and Ejection Lever For use with the 700-HN123 sockets Built-in ability to accept 1492 snap-in markers	10	700-HN119
Cat. No. 700-HN119
	Relay Identification Snap-in Markers Note - These markers can only be used when the Plastic Retainer and Ejection Lever accessory (part # 700-HN119) is used because the markers snap into the Ejection Lever (and not into the relay itself).	5	1492-MS5X12
		5	1492-MS6X9
		5	1492-MS6X12
		5	1492-MS8X9
		5	1492-MS8X12
		100	1492-MP-Blank
Snap-in markers
	Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays.	10	700-N40
			700-N41

Bulletin 700-HP Pin Style (PCB) Slim Line Relay, Socket, and Retainer Clip Reference Chart

Relay Type	Socket Cat. No.	Retainer Clip Cat. No.
700-HPX2	700-HN123	700-HN119
700-HP32	700-HN123	700-HN119

Specifications

Cat. No. 700-HP…
Electrical Ratings
Pilot Duty RatingT		C300, R300
Rated Thermal Current (I_th)		2-Pole — 8A
Rated Insulation Voltage (U_i)		250V IEC, 300V UL/CSA
Contacts	Inductive	2-Pole		Hp

	120V AC, 1-phase	15 A	1.5 A	1/6
	240V AC, 1-phase	7.5 A	0.75 A	1/3
	General Purpose	8 A, 277V AC
	Resistive	8 A, 30V DC
Min. Permissible Contact Ratings		700-HP32 = 300 mW (5V, 5 mA) 700-HPX = 50 mW (5V, 5 mA)
Permissible Coil Voltage Variation		Pickup: 80…110% of Nominal Voltage at 50 Hz 80…110% of Nominal Voltage at 60 Hz 73…150% of Nominal Voltage at DC		Must Drop-out Voltage: 20% of Nominal Coil Voltage AC 10% of Nominal Coil Voltage DC
Sealed Power Consumption ±10%	AC Coils	Max. Allowable Leakage OFF 25% of VA‡ 1.2 VA 50 Hz 1.0 VA 60 Hz
	DC Coils	Max. Allowable Leakage of 10% of W 0.5 W
Design Specification/Test Requirements
Dielectric Withstand Voltage for One Minute	Pole to Pole (VRMS)	1000V AC
	Contact to Coil (VRMS)	5000V AC
Mechanical
Degree of Protection		Open Type (Sockets)
Mechanical Life Cycles		10 x 10⁶ (AC Coils), 20 x 10⁶ (DC coils)
Switching Frequency Operations		1800/hr (no load)
Coil Voltages		See Overview/Product Selection
Operating Time at Nominal Voltage at 20 °C (ms)	Pickup	12
	Dropout	4
Maximum Operating Rate		16 Ops/s (full load)
Vibration	Enclosure	5 G
	Fragility	2.5 G
Shock	Endurance	50 G
	Fragility	15 G
Max. Socket Torque		0.5 N•m (4.4 lb•in)
Environmental
Temperature	Operating	–40…+85 °C
	Storage	–45…+100 °C
Altitude		2000 m (6560 ft)
Construction
Insulating Material		Molded High-Dielectric Material
Enclosure		Transparent Dust Cover
Contact Material		Silver Nickel, (AgNi) (700-HP3), Silver Nickel + Gold Plating (AgNi + Au) (700-HPX)
Terminal Markings on Socket		In accordance with EN50 0005
Sockets		2-Pole
		700-HN123
Approvals
Certifications		cURus Recognized (File No. E3125, Guide NLDX2/NLDX8), cULus Listed when used with Bulletin 700-HN123 socket (File No. E3125, Guide NLDX/NLDC7), CSA Certified (files 229473), CE Marked, LR Certified
Standards		UL 508, CSA 22.2 No. 14, EN 61812-1, EN 60255-23

¬ See Performance Data.
T NEMA Rating Chart is in publication 700-SG003_-EN-P.
‡ The inrush VA equals 1.5 times the sealed VA.

Approximate Dimensions

Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes.

Bulletin 700-HP Relay

Cat. No.	A	B	C	D	Approx. Shipping Wt.
199-DR1	35 (1-3/8)	27 (1-1/16)	7.5 (19/64)	1.02 (1/64)	1.85 kg (4.07 lb) (10/pkg)
199-DR4	35 (1-3/8)	27 (1-1/16)	15 (19/32)	2.3 (3/32)	3.68 kg (8 lb) (5/pkg)

Cat. No. 700-HN123Single Wire: 0.2.....2.5 mm² (#24.....14 AWG)Double Wire: 2 X 0.2.....2 X 2.5 mm² (#2 X 24....2 X 14 AWG)Wire Type: solid or stranded, copper onlyStrip Length: 7 mm (9/32 in.), Torque: 0.5 N•m (4.4 lb•in)