Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Relays > Bulletin 700-HP PCB Pin Style Relay
Bulletin 700-HP PCB Pin Style Relay
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Accessories | |
Specifications ⋆ | |
Approximate Dimensions | |
| Description | Pkg. Quantity | Cat. No. | |||
|
Diode Surge Suppressor Voltage Range: 6…220V DC used with 700-HN123 socket |
10 | 700-ADR | ||
| Diode with LED Surge Suppressor Voltage Range: 6…24V DC used with 700-HN123 socket |
10 | 700-ADL1R | |||
| Diode with LED Surge Suppressor Voltage Range: 28…60V DC used with 700-HN123 socket |
10 | 700-ADL2R | |||
| Diode with LED Surge Suppressor Voltage Range: 110…220V DC used with 700-HN123 socket |
10 | 700-ADL3R | |||
| Diode with LED Surge Suppressor Voltage Range: 6…24V AC used with 700-HN123 socket |
10 | 700-AV1R | |||
| Varistor with LED Surge Suppressor Voltage Range: 110…240V AC used with 700-HN123 socket |
10 | 700-AV3R | |||
| RC Surge Suppressor Voltage Range: 6…24V AC/DC used with 700-HN123 socket |
10 | 700-AR1 | |||
| RC Surge Suppressor Voltage Range: 110…240V AC/DC used with 700-HN123 socket |
10 | 700-AR2 | |||
|
Timing Module On-Delay or One-Shot selectable voltage range: 12…24V AC/DC used with sockets that accept plug-in accessory modules. |
|
1 | 700-AT3 | |
| Timing Module On-Delay or One-Shot selectable voltage range: 110…125V AC used with sockets that accept plug-in accessory modules. |
700-AT3A1 | ||||
| Timing Module On-Delay or One-Shot selectable voltage range: 230…240V AC used with sockets that accept plug-in accessory modules. |
700-AT3A2 | ||||
|
Screw Terminal Socket — Panel or DIN Rail Mounting 8-pin miniature socket for use with 2-pole, Bulletin 700-HP relays. Incorporates coil and contact separation. |
10 | 700-HN123 | ||
| Cat. No. 700-HN123 | |||||
|
8-Way Jumper can be cut to required length. Rated 10 A – 250V | 1 | Color | Cat. No. | |
| Red | 700-HN180R | ||||
| Gray | 700-HN180G | ||||
| Cat. No. 700-HN180 | Blue | 700-HN180B | |||
| Cat. No. 700-HN119 | Plastic Retainer and Ejection Lever For use with the 700-HN123 sockets Built-in ability to accept 1492 snap-in markers |
10 | 700-HN119 | ||
| Cat. No. 700-HN230 | Spring Clamp Terminal Socket — Panel or DIN Rail Mounting 8-pin miniature socket for use with 2-pole, Bulletin 700-HP relays. Incorporates coil and contact separation. |
10 | 700-HN230 | ||
| Cat. No. 700-HN232 | Plastic Retainer and Ejection Lever For use with the 700-HN230 sockets Built-in ability to accept 1492 snap-in markers |
10 | 700-HN232 | ||
|
DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m |
10 | 199-DR1 | ||
| Cat. No. 199-DR1 | |||||
|
Relay Identification Snap-in Markers Note - These markers can only be used when the Plastic Retainer and Ejection Lever accessory (part # 700-HN119) is used because the markers snap into the Ejection Lever (and not into the relay itself). |
5 | 1492-MS5X12 | ||
| 5 | 1492-MS6X9 | ||||
| 5 | 1492-MS6X12 | ||||
| 5 | 1492-MS8X9 | ||||
| 5 | 1492-MS8X12 | ||||
| 100 | 1492-MP-Blank | ||||
| Snap-in markers | |||||
|
Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays. | 10 | 700-N40 | ||
| 700-N41 | |||||
Bulletin 700-HP Pin Style (PCB) Slim Line Relay, Socket, and Retainer Clip Reference Chart
| Relay Type | Socket Cat. No. | Retainer Clip Cat. No. |
| 700-HPX2 | 700-HN123 | 700-HN119 |
| 700-HP32 | 700-HN123 | 700-HN119 |