Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Relays > Bulletin 700-HC Miniature Ice Cube Relay
Bulletin 700-HC Miniature Ice Cube Relay
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
| Description | Pkg. Qty. | Cat. No. | ||
|
Diode with LED Surge Suppressor Voltage Range: 6…24V DC used with 700-HN104 socket |
10 | 700-ADL1 | |
| Diode with LED Surge Suppressor Voltage Range: 28…60V DC used with 700-HN104 socket |
10 | 700-ADL2 | ||
| Diode with LED Surge Suppressor Voltage Range: 110…220V DC used with 700-HN104 socket |
10 | 700-ADL3 | ||
| Varistor with LED Surge Suppressor Voltage Range: 6…24V AC used with 700-HN104 socket |
10 | 700-AV1R | ||
| Varistor with LED Surge Suppressor Voltage Range: 110…240V AC used with 700-HN104 socket |
10 | 700-AV3R | ||
| RC Surge Suppressor Voltage Range: 6…24V AC/DC used with 700-HN104 socket |
10 | 700-AR1 | ||
| RC Surge Suppressor Voltage Range: 110…240V AC/DC used with 700-HN104 socket |
10 | 700-AR2 | ||
|
Timing Module On-Delay or One-Shot selectable voltage range: 12…24V AC/DC used with sockets that accept plug-in accessory modules. |
|
1 | 700-AT3 |
| Timing Module On-Delay or One-Shot selectable voltage range: 110…125V AC used with sockets that accept plug-in accessory modules. |
700-AT3A1 | |||
| Timing Module On-Delay or One-Shot selectable voltage range: 230…240V AC used with sockets that accept plug-in accessory modules. |
700-AT3A2 | |||
|
Screw Terminal Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction.Ith = 10 A per pole. 14-blade miniature socket for use with Bulletin 700-SC Relays. | 10 | 700-HN103 | |
| Cat. No. 700-HN103 | ||||
|
Screw Terminal Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction Ith = 10 A per pole. 14-blade miniature socket for use with Bulletin 700-SC relays. This socket has coil and contact separation as well as the ability to plug in optional plug in modules (700-A__ accessories: LED, Surge Suppression, Timing Modules) | 10 | 700-HN104 | |
| Cat. No. 700-HN104 | ||||
|
Screw Terminal Base Socket — Panel or DIN Rail Mounting; Open-Style Construction Ith = 10 A per pole. 14-blade miniature socket for use with Bulletin 700-SC Relays. | 10 | 700-HN128 | |
| Cat. No. 700-HN128 | ||||
|
DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m |
10 | 199-DR1 | |
| Cat. No. 199-DR1 | ||||
|
Retainer Clip for Cat. Nos. 700-HN103, -HN104 and -HN128 Sockets with 700-HC Relays. Secures relay in socket. ⋆ | 10 | 700-HN114 | |
| Plastic Retainer and Ejection Lever For use with the 700-HN104 Sockets for 700-HC relays. Built-in ability to accept 1492 Snap-in Markers |
10 | 700-HN124 | ||
| Sample Retainer Clips | ||||
| ⋆ See Bulletin 700-HC Miniature Square Base Relay, Socket, and Retainer Clip Reference Chart | ||||
| Description | Pkg. Qty. | Cat. No. | |
|
Relay Identification Snap-in Markers Snap-in markers fit on top of product covers. Squares slip into molded slot on top of product cover. |
5 | 1492-MS5X12 |
| 5 | 1492-MS6X9 | ||
| 5 | 1492-MS6X12 | ||
| 5 | 1492-MS8X9 | ||
| 5 | 1492-MS8X12 | ||
| 100 | 1492-MP-Blank | ||
| Snap-in markers | |||
|
Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays. | 10 | 700-N40 |
| Markers — Used for terminal identification | 50 | 700-N41 | |
| Relay Type | Socket Cat. No. | Retainer Clip Cat. No. |
| 700-HC | 700-HN103 | 700-HN114 |
| 700-HN128 | 700-HN114 | |
| 700-HN104 | 700-HN114 or 700-HN124 | |