General Purpose Relays

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Relays > Bulletin 700-HC Miniature "Ice Cube" Relay

Bulletin 700-HC Miniature "Ice Cube" Relay

Introduction Standards Compliance and Certifications Product Selection Accessories Specifications Approximate Dimensions
Specifications

Cat. No. 700-HC…
Electrical Ratings
Pilot Duty Rating T  NEMA C300, R300
Rated Thermal
Current (Ith)
7 A and 10 A
Rated Insulation Voltage (Ui) 250V IEC – 300V UL/CSA
Contacts Inductive 700-HC_4 Hp 700-HC22 Hp
  Click to enlarge - 700HA-69-1 Click to enlarge - 700HA-69-2   Click to enlarge - 700HA-69-1 Click to enlarge - 700HA-69-2  
120V AC 15 A 1.5 A 1/8 15 A 1.5 A 1/3
240V AC 7.5 A 0.75 A 1/3 7.5 A 0.75 A 3/4
General Purpose 7 A, 277V AC 10 A, 277V AC
Resistive 7 A, 30V DC 10 A, 24V DC
Min. Low Energy Permissible Load 5V, 5 mA (Gold)
10V 1 mA (Silver)
Permissible Coil Voltage Variation Pickup: 80…110% of Nominal Voltage at 50 Hz Must Dropout Voltage: 20% of Nominal Voltage at AC
80…110% of Nominal Voltage at 60 Hz 10% of Nominal Voltage at DC
80…110% of Nominal Voltage at DC  
  50 Hz 60 Hz
Coil Consumption ±10% AC Coils Inrush 2.2 VA 1.6 VA
Sealed 1.3 VA 1.1 VA
DC Coils 1.0 W
Max. Allowable Leakage 20% of VA (AC)
10% of W (DC)
Design Specification/Test Requirements
Electrical
Dielectric Withstand Voltage Pole-to-Pole 1000V
Contact to Coil 3600V
Contact to Frame 3600V
Electrical Life (Cycles) 100 000 minimum
Mechanical
Degree of Protection
(Open Type) IEC 529
IP 20 (Guarded Terminal Sockets)
Mechanical Life Cycles 20 x 106 (AC) 50 x 106 (DC)
Switching Frequency Operations 1800/HR
Coil Voltages See Product Selection
Operating Time (ms) Max. Pickup 10
Max. Dropout 3
Maximum Operating Rate 8 cycles/s
Environmental
Temperature Operating –30…+55 °C
(–22…+131 °F)
Storage –55…+85 °C
(–67…+185 °F)
Altitude 2000 m (6560 ft)
Insulating Material Molded High Dielectric Material
Enclosure Transparent Dust Cover
Contact Material AgNi (700-HC2)
AgNi + 5 mm All (700-HC1)
Terminal Markings on Socket In accordance with EN50 0005
Sockets 700-HN103, -HN128, -HN104
Certifications cURus Recognized (File No. E14843, Guide NRNT2/NRNT8), cULus Listed when used with Bulletin 700-HN103, -HN104, and -HN128 sockets (File No. E14843, Guide NRNT/NRNT7), CE Marked, LR Certified
Standards UL 508, CSA 22.2 No. 14, EN/IEC 60947-4-1, EN/IEC 60947-5-1
  
¬ See Performance Data.
T NEMA Rating Chart is in publication 700-SG003_-EN-P.