Bulletin 700-HL Terminal Block Relay

Product Overview


Click to enlarge - 700HL-102-1


Bulletin 700-HL "Terminal Block Relay"


Standards Compliance and Certifications

See Specifications.

Product Selection

Build a Catalog Number


Standard built-in Features:
  • LED

  • Reverse Polarity Protection for DC Inputs

  • Coil Surge Protection § 
    		•  Click to enlarge - 700-HLT1_GS Click to enlarge - TOC-3-7 Click to enlarge - 700-HLS1Z24_GS Click to enlarge - 700HL-102-5
    Cat. No. 700-HLT1Z24 Cat. No. 700-HLT2Z24 Cat. No. 700-HLS1Z24 Cat. No. 700-HLS11Z24
    Specifications Click to enlarge - 700HL-102-6 Click to enlarge - 700HL-102-7
    Output Type SPDT (1 C/O); Ith = 6A‡  1 N.O. solid-state; Ith = 2 A, 24V DC or Ith = 1 A, 240V AC
    Recommended Tightening Torque 0.5 Nm max. (4.4 lb.–in.)
    Wire Range Screw Terminal: 0.14 mm2…2.5 mm2 (#26…#14 AWG), Spring Terminal: 0.2 mm2…2.5 mm2 (#24…#14 AWG)
    Approvals UL, cULus, cURus, ABS, CE
      
    ¬ Reverse polarity on the output terminals of the solid-state relay will result in the output being "ON" regardless of the state of the input voltage.
    ‡ For Gold-plated contacts: Add the letter “X” at the end of the catalog number. For example: if Cat. No. 700-HLT1Z24 is required with gold plating, the new cat. no. is 700-HLT1Z24X.

    Assembled Devices Pkg. Quantity Cat. No.
    (Screw Terminals)     		Cat. No.
    (Spring Clamp Terminals)     		Pkg. Quantity Cat. No.
    (Screw Terminals)
    (DC Output)     		Cat. No.
    (Spring Clamp Terminals)
    (DC Output)     		Cat. No.
    (Screw Terminals)
    (AC Output)
    Input Voltage
    12V DC 10 T  700-HLT1Z12 700-HLT2Z12 — — — —
    24V DC 10 T  700-HLT1Z24 700-HLT2Z24 10 T  700-HLS1Z24 700-HLS2Z24 700-HLS11Z24
    48V DC 10 T  700-HLT1Z48 700-HLT2Z48 10 T  700-HLS1Z48 700-HLS2Z48 700-HLS11Z48
    12V AC/DC 10 700-HLT1U12 700-HLT2U12 — — — —
    24V AC/DC 10 700-HLT1U24 700-HLT2U24 — — — —
    48V AC/DC 10 700-HLT1U48 700-HLT2U48 — — — —
    110/125V AC/DC 10 700-HLT1U1 700-HLT2U1 10 T  700-HLS1U1 700-HLS2U1 700-HLS11U1
    220…240V AC/DC 10 700-HLT1U2 700-HLT2U2 10 T  700-HLS1U2 700-HLS2U2 700-HLS11U2
    240V AC 10 700-HLT1A2 — — — — — —
    Built-in LCSC (leakage current suppression circuit)
    120V AC and 125V DC§      		10 T  700-HLT1L1 — 10 T  700-HLS1L1 — 700-HLS11L1
    Built-in LCSC (leakage current suppression circuit) 240V AC§  10 T  700-HLT1L2 — 10 T  700-HLS1L2 — 700-HLS11L2
    Hazardous Location Certification 24V DC 10 700-HLT1Z24-EX — 10 700-HLS1Z24-EX — —
    Hazardous Location Certification 12V DC 10 700-HLT1Z12-EX — 10 — — — —
    Hazardous Location Certification 110/125V AC/DC 10 700-HLT1U1-EX — 10 700-HLS1U1-EX — —
      
    T Electromechanical relay to solid-state relay interchangeability is possible.
    § Leakage current suppression up to 2.2 mA off state current.
    § Diode surge protection provided.

    Accessories

      Description Pkg. Quantity Socket Input Voltage Cat. No.
    Click to enlarge - 700-TBR24_GS Replacement Relays
    Order must be for 20 relays or multiples of 20.     		20 12V AC/DC 700-TBR12¬ 
    24V AC/DC 700-TBR24¬ 
    48V AC/DC 700-TBR48¬ 
    Cat. No. 700-TBR24 110/125V AC/DC
    220…240V AC/DC     		700-TBR60¬ 
    Click to enlarge - 700-TBS24_GS Replacement SSR
    4-blade miniature relay for use with 1 N.O. SSR DC output. Order multiples of 20.     		20 24V DC 700-TBS24
    48V DC, 110/125V AC/DC
    220…240V AC/DC     		700-TBS60
    Cat. No. 700-TBS24 Replacement SSR
    4-blade miniature relay for use with 1 N.O. SSR AC output. Order multiples of 20.     		20 24V DC 700-TBS124
      Replacement SSR
    4-blade miniature relay for use with 1 N.O. SSR AC output. Order must be for 20 relays or multiples of 20.     		20 48V DC
    110/125V AC/DC
    220…240V AC/DC     		700-TBS160
    Click to enlarge - 700HL-103-3 20-Way Jumper
    Can be cut to required length. Ith = 36 A max per 20-way jumper.     		1 Color
    Red 700-TBJ20R
    Grey 700-TBJ20G
    Cat. No. 700-TBJ20B Blue 700-TBJ20B
    Click to enlarge - 700-HN177_GS End Barrier
    Used for visual inspection of groups, safe separation of neighboring 700-HL modules that end with jumpers.     		10 Black 700-HN177
    Cat. No. 700HN177
    Click to enlarge - 700HA-68-2 Snap-in Marker
    These snap-in markers have a 6 x 10 mm surface and snap into the ejection lever for the relay.     		100 Blank 1492-MC6X10
    Standard 1492-MC6X10 www.ab.com/
    catalogs for information
    Custom T 
      
    ¬ For gold-plated contacts: Add the letter “X” at the end of the catalog number. For example: if Cat. No. 700-TBR24 is required with gold plating, the new cat. no. is 700-TBR24X.
    T Go to http://www.ab.com/software/ and click on "Terminal Marking System and WinABMS " to download software. Create custom text, save file, and e-mail to your local Rockwell Automation sales office or Allen-Bradley distributor.
    Note:Terminal block relay bases are not sold separately.

    Specifications

    Cat. No. 700-HLT… (Relay Output)
    Electrical Ratings
    Pilot Duty Rating B 300, R 300
    Rated Thermal Current (Ith) 1-Pole — 6 A
    Rated Insulation Voltage (Ui) 250V IEC, 300V UL/CSA
    Contacts Inductive 1-Pole
    24V AC,
    1-phase     		30 A Click to enlarge - 700HA-69-1 5 A Click to enlarge - 700HA-69-2  
    120V AC,
    1-phase     		30 A 3 A
    240V AC,
    1-phase     		15 A 1.5 A
    Make, Break &
    Continuous
    V DC     		24V DC 1.0 A
    120V DC 0.2 A
    240V DC 0.1 A
    Inductive Load AC-15 250V, 3 A N.O. Contact, 1.5 A N.C. Contact
    DC-13 24V, 1 A N.O. and N.C. Contact
    Min. Permissible Contact Ratings 12V, 6 mA (72 mW) for Silver Contacts, 8V, 2.5 mA (20 mW) for Gold Contacts
    Permissible Coil Voltage Variation Pickup:

    		 85…110% of Nominal Voltage at 50 Hz
    85…110% of Nominal Voltage at 60 Hz
    80…110% of Nominal Voltage at DC     		Must Dropout Voltage:

    		 10% of Nominal Voltage at AC
    5% of Nominal Voltage at DC
    Power Consumption
    ±10%     		AC 0.3 VA
    DC 0.2 W
    Design Specification/Test Requirements
    Dielectric Withstand Voltage Pole to Pole
    (VRMS)     		1000V
    Contact to Coil
    (VRMS)     		4000V
    Input Voltage 12V AC/DC 24V AC/DC 48V AC/DC 120V AC/DC 240V AC/DC 120V LCSC 240V LCSC
    Impedance (Ohms) 1 K 2 K 6 K 26 K 56 K 16 K 35 K
    Mechanical
    Degree of Protection IP20
    Mechanical Life Operations 1 x 107
    Electrical Life Operations 6 A Resistive: 100 000 min.
    24V DC, 1 A Inductive: 200 000 min.
    120V AC 1 A Inductive: 300 000 min.
    Switching Frequency Operations (no-load) 10 cycles/sec
    Coil Voltages See Overview/Product Selection
    Operating Time at Nominal Voltage at 20 °C (ms) Pickup 7 ms
    Dropout 3 ms
    Maximum Operating Rate (full load = 6 A) 6 cycles/min.
    Coil Surge Protection Per EN 61000-4.5; Surge Immunity (801-5)
    Class III: 2 kV common and 1 kV differential mode
    Environmental
    Temperature Operating –40…+55 °C
    Storage –40…100 °C
    Altitude 2000 m (6560 ft)
    Construction
    Insulating Material Molded High Dielectric Material
    Enclosure Relay IP67
    Contact Material Silver Tin Ox., AgSnO2 or Silver with Gold Plating, AgSnO2 + Au
    Terminal Markings on Socket In accordance with EN50 0005
    Certifications cULus Listed (File No. E3125, Guide NLDX/NLDX7) with Allen-Bradley socket, CE Marked, ABS (American Bureau of Shipping)
    Standards EN60947-4-1,EN60947-5-1,CSA 22.2,UL 508,NEMA IEE MAC Compliant, ICS-2 Compliant
    Hazardous Location Approvals Class 1, Zn 2, Groups IIC, Ex nC IIC T5 Ta < 55 °C
    UL Listed
    (UL 60079-15)     		700-HLT1Z12-EX (12V DC supply)
    700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply)
    700-HLT1U1-EX, 700-HLS1U1-EX (110V/125V AC/DC supply)
    CSA CertifiedT 
    (CAN/CSA E60079-15)     		700-HLT1Z12-EX (12V DC supply)
    700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply)
      
    ¬ Performance Data – See this catalog, ImportantPerformance Data.
    T Product shall be installed in an enclosure providing at least IP54 protection. Provisions shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40%.

    Cat. No. 700-HLS… (Solid State Output)
    Electrical
    Rated Thermal Current (Ith)   2 A (DC output) 1 A (AC output)
    Rated Insulation Voltage (Ui) 250V IEC, 300V UL/CSA
    Control Circuit Min. Control Voltage 80% nominal voltage
    Maximum Control Voltage 110% nominal voltage
    Control Current 9 mA ±10% (24V) 4 mA ±10% (120/240V)
    Release Voltage 0.4 x nominal voltage (24V), 0.35 x nominal voltage (120/240V)
    Min. Control Circuit Resistance 3200 ohms (24V), 16k ohms (120V), 32k ohms (240V) 2500 ohms (24V), 12k ohms (120V), 24k ohms (240V)
    Outputs Load Voltage Range 0…24V DC 24…240V AC
    Max. Repetitive Blocking Voltage 33V 600V
    Max. Switching Current
    (inductive/resistive)     		2 A DC 1 A AC
    On State Voltage Drop @ Max. Switching Current <120 mV DC <1V AC
    Leakage Current max. 100 mA (@U = 24V)
    Power Consumption
    ±10%     		AC 0.6 VA (120V), 1 VA (240V)
    DC 0.2 W 0.3 W
    Design Specification/Test Requirements
    Dielectric Withstand Voltage Pole to Pole (VRMS) 2500V
    Contact to Coil (VRMS) 2500V
    Input Voltage 24V DC 48V DC 120V AC/DC 240V AC/DC 120V LCSC 240V LCSC
    Impedance (Ohms) 2K 9 K 26 K 58 K 16 K 35 K
    Mechanical
    Degree of Protection IP20
    Input Voltages See Overview/Product Selection
    Operating Time at Nominal
    Voltage at 20 °C (ms)     		Turn on Time 30 ms (DC only input voltage), 7 ms (AC/DC input voltage)
    Drop Out Time 350 ms (DC only input voltage), 10 ms (AC/DC input voltage)
    Maximum Operating Rate 300 Hz
    Environmental
    Temperature Operating –20…+55 °C
      Storage –40…70 °C
    Altitude 2000 m (6560 ft)
    Construction
    Insulating Material Molded High-Dielectric Material
    Enclosure Relay IP67
    Terminal Markings on Socket In accordance with EN50 0005
    Certifications cULus Listed (File No. E3125, Guide NLDX/NLDX7), CE Marked, ABS (American Bureau of Shipping)
    Standards UL 508, CSA C22.2 No. 14, EN/IEC 60947-1, -5-1
    Hazardous Location Approvals Class 1, Zn 2, Groups IIC, Ex nC IIC T5 Ta < 55 °C
    UL Listed
    (UL 60079-15)     		700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply)
    700-HLT1U1-EX, 700-HLS1U1-EX (110V/125V AC/DC supply)
    CSA Certified¬ 
    (CAN/CSA 60079-15)     		700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply)
      
    ¬ Product shall be installed in an enclosure providing at least IP54 protection. Provisions shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40%.

    Approximate Dimensions

    Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes.

    Click to enlarge - 700HL-106-1
    Bulletin 700-HL Screw Terminal DesignSingle Wire: 0.14 mm2…2.5 mm2 (#26 AWG…14 AWG)Double Wire: 2 x 0.14 mm2…2 x 1.5 mm2 (2 x #26 AWG…2 x 16 AWG)Wire Type: Solid or stranded, copper onlyStrip Length: 9 mm (11/32 in.). Torque: 0.5 N•m (4.4 lb•in)


    Click to enlarge - 700HL-106-2
    Bulletin 700-HL Spring Terminal DesignSingle Wire: 0.2 mm2…2.5 mm2 (#24 AWG…#14 AWG)Wire Type: Solid or stranded, copper onlyStrip Length: 9 mm (11/32 in.)


    Click to enlarge - 700HA-72-2
    Cat. No. 199-DR1 DIN Mounting Rail Series BCat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes


    Cat. No. A B C D Approx.
    Shipping Wt.
    199-DR1 35
    (1-3/8)     		27
    (1-1/16)     		7.5
    (19/64)     		1.02
    (1/64)     		1.85 kg
    (4.07 lb) (10/pkg)
    199-DR4 35
    (1-3/8)     		27
    (1-1/16)     		15
    (19/32)     		2.3
    (3/32)     		3.68 kg
    (8 lb) (5/pkg)