General Purpose Relays

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Relays > Bulletin 700-HL Terminal Block Relay

Bulletin 700-HL Terminal Block Relay

Specifications

Cat. No. 700-HLT… (Relay Output)
Electrical Ratings
Pilot Duty Rating	B 300, R 300
Rated Thermal Current (Ith)	1-Pole — 6 A
Rated Insulation Voltage (Ui)	250V IEC, 300V UL/CSA
Contacts	Inductive	1-Pole
	24V AC, 1-phase	30 A		5 A
	120V AC, 1-phase	30 A		3 A
	240V AC, 1-phase	15 A		1.5 A
	Make, Break & Continuous V DC	24V DC			1.0 A
		120V DC			0.2 A
		240V DC			0.1 A
Inductive Load	AC-15 250V, 3 A N.O. Contact, 1.5 A N.C. Contact DC-13 24V, 1 A N.O. and N.C. Contact
Min. Permissible Contact Ratings	12V, 6 mA (72 mW) for Silver Contacts, 8V, 2.5 mA (20 mW) for Gold Contacts
Permissible Coil Voltage Variation	Pickup:	85…110% of Nominal Voltage at 50 Hz 85…110% of Nominal Voltage at 60 Hz 80…110% of Nominal Voltage at DC			Must Dropout Voltage:	10% of Nominal Voltage at AC 5% of Nominal Voltage at DC
Power Consumption ±10%	AC	0.3 VA
	DC	0.2 W
Design Specification/Test Requirements
Dielectric Withstand Voltage	Pole to Pole (VRMS)	1000V
	Contact to Coil (VRMS)	4000V
Input Voltage	12V AC/DC	24V AC/DC	48V AC/DC	120V AC/DC	240V AC/DC	120V LCSC	240V LCSC
Impedance (Ohms)	1 K	2 K	6 K	26 K	56 K	16 K	35 K
Mechanical
Degree of Protection	IP20
Mechanical Life Operations	1 x 107
Electrical Life Operations	6 A Resistive: 100 000 min. 24V DC, 1 A Inductive: 200 000 min. 120V AC 1 A Inductive: 300 000 min.
Switching Frequency Operations (no-load)	10 cycles/sec
Coil Voltages	See Overview/Product Selection
Operating Time at Nominal Voltage at 20 °C (ms)	Pickup	7 ms
	Dropout	3 ms
Maximum Operating Rate (full load = 6 A)	6 cycles/min.
Coil Surge Protection	Per EN 61000-4.5; Surge Immunity (801-5) Class III: 2 kV common and 1 kV differential mode
Environmental
Temperature	Operating	–40…+55 °C
	Storage	–40…100 °C
Altitude	2000 m (6560 ft)
Construction
Insulating Material	Molded High Dielectric Material
Enclosure	Relay IP67
Contact Material	Silver Tin Ox., AgSnO2 or Silver with Gold Plating, AgSnO2 + Au
Terminal Markings on Socket	In accordance with EN50 0005
Certifications	cULus Listed (File No. E3125, Guide NLDX/NLDX7) with Allen-Bradley socket, CE Marked, ABS (American Bureau of Shipping)
Standards	EN60947-4-1,EN60947-5-1,CSA 22.2,UL 508,NEMA IEE MAC Compliant, ICS-2 Compliant
Hazardous Location Approvals	Class 1, Zn 2, Groups IIC, Ex nC IIC T5 Ta < 55 °C
	UL Listed (UL 60079-15)	700-HLT1Z12-EX (12V DC supply) 700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply) 700-HLT1U1-EX, 700-HLS1U1-EX (110V/125V AC/DC supply)
	CSA CertifiedT  (CAN/CSA E60079-15)	700-HLT1Z12-EX (12V DC supply) 700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply)
¬ Performance Data – See this catalog, ImportantPerformance Data.
T Product shall be installed in an enclosure providing at least IP54 protection. Provisions shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40%.

Cat. No. 700-HLS… (Solid State Output)
Electrical
Rated Thermal Current (Ith)		2 A (DC output)			1 A (AC output)
Rated Insulation Voltage (Ui)	250V IEC, 300V UL/CSA
Control Circuit	Min. Control Voltage	80% nominal voltage
	Maximum Control Voltage	110% nominal voltage
	Control Current	9 mA ±10% (24V) 4 mA ±10% (120/240V)
	Release Voltage	0.4 x nominal voltage (24V), 0.35 x nominal voltage (120/240V)
	Min. Control Circuit Resistance	3200 ohms (24V), 16k ohms (120V), 32k ohms (240V)			2500 ohms (24V), 12k ohms (120V), 24k ohms (240V)
Outputs	Load Voltage Range	0…24V DC			24…240V AC
	Max. Repetitive Blocking Voltage	33V			600V
	Max. Switching Current (inductive/resistive)	2 A DC			1 A AC
	On State Voltage Drop @ Max. Switching Current	<120 mV DC			<1V AC
	Leakage Current	max. 100 mA (@U = 24V)
Power Consumption ±10%	AC	0.6 VA (120V), 1 VA (240V)
	DC	0.2 W			0.3 W
Design Specification/Test Requirements
Dielectric Withstand Voltage	Pole to Pole (VRMS)	2500V
	Contact to Coil (VRMS)	2500V
Input Voltage	24V DC	48V DC	120V AC/DC	240V AC/DC	120V LCSC	240V LCSC
Impedance (Ohms)	2K	9 K	26 K	58 K	16 K	35 K
Mechanical
Degree of Protection	IP20
Input Voltages	See Overview/Product Selection
Operating Time at Nominal Voltage at 20 °C (ms)	Turn on Time	30 ms (DC only input voltage), 7 ms (AC/DC input voltage)
	Drop Out Time	350 ms (DC only input voltage), 10 ms (AC/DC input voltage)
Maximum Operating Rate	300 Hz
Environmental
Temperature	Operating	–20…+55 °C
	Storage	–40…70 °C
Altitude	2000 m (6560 ft)
Construction
Insulating Material	Molded High-Dielectric Material
Enclosure	Relay IP67
Terminal Markings on Socket	In accordance with EN50 0005
Certifications	cULus Listed (File No. E3125, Guide NLDX/NLDX7), CE Marked, ABS (American Bureau of Shipping)
Standards	UL 508, CSA C22.2 No. 14, EN/IEC 60947-1, -5-1
Hazardous Location Approvals	Class 1, Zn 2, Groups IIC, Ex nC IIC T5 Ta < 55 °C
	UL Listed (UL 60079-15)	700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply) 700-HLT1U1-EX, 700-HLS1U1-EX (110V/125V AC/DC supply)
	CSA Certified¬  (CAN/CSA 60079-15)	700-HLT1Z24-EX, 700-HLS1Z24-EX (24V DC supply)
¬ Product shall be installed in an enclosure providing at least IP54 protection. Provisions shall be made to prevent the rated voltage from being exceeded by transient disturbances of more than 40%.