General Purpose Electronic Timers and Counters

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Electronic Timers and Counters > Bulletin 700-FE Economy Timing Relay

Bulletin 700-FE Economy Timing Relay

Introduction Standards Compliance and Certifications Product Selection Accessories 700-FE Function and Connection Diagrams Specifications Approximate Dimensions
Specifications

Specifications¬ 

Time Characteristics (according to VDE 0435, part 2021)

  Click to enlarge - 700FE-118-2 1 N.O. Click to enlarge - 700FE-118-3 SPDT
Setting Accuracy ±5% of full scale
Repeatability ±1% of setting (typical)
Tolerance By voltage: ±0.01%/%DU
By temperature: ±0.25%/°C 		By voltage: ±0.001%/%DU
By temperature: ±0.025%/°C
Supply
Supply Voltage 24V AC/DCT  and 110…240V AC, 50/60 Hz 24…48V DC and 24…240V AC, 50/60 Hz
Voltage Tolerance AC –15%/+10%
DC –15%/+20%
Power Consumption 0.5 W at 24V DC, 5 VA at 240V AC
Time Energized 100%
Reset Time 100 ms
Cable Length (Supply Voltage Control) Max. 250 m (750 feet)
Pulse Control (B1)
Impulse Duration ³ 250 ms ³ 50 ms (AC), ³ 30 ms (DC)
Input Voltage supply voltage range
Input Current 1 mA
Cable Length Max. 250 m without parallel load between B1 and A2
Max. 50 m with load (< 3 kW) between B1 and A2
Outputs
Contact Type 1 N.O. contact 1 Form C – SPDT contact
Dielectric Withstand Voltage Contact-to-coil 4000 V
Switching Capacity Power 1250 VA
According to IEC 947-5-1 AC-1 5 A /250V AC (resistive load)
AC-14 1 A/250V AC (inductive load)
DC-13 1 A/24V DC (inductive load)
According to UL 508 NEMA D300 - 1 A/300V AC
Short-Circuit Resistance 6 A gL (Fast Blow Fuse)
Life Mechanical 20 million operations
Electrical 0.4 million at 1 A/250V AC, resistive
0.4 million at 0.5 A/250V AC, cos f = 0.4
0.4 million at 1 A/24V DC, resistive
State Indicator 1 Bi-Color LED (Supply; Relay)
Certifications cULus Listed (File No. E14840, Guide NKCR/NKCR7), CE Marked
Standards EN/IEC 60947-1, EN/IEC 60947-5-1, UL 508, CSA 22.2 No. 14
  
¬ See Performance Data
T Voltage is either 24V DC or AC 50/60 Hz.

General Specifications

  Click to enlarge - 700FE-118-2 1 N.O. Click to enlarge - 700FE-118-3 SPDT
Insulation Characteristics 2 kV AC/50 Hz test voltage according to VDE 0435
and 4 kV 1.2/50 ms surge voltage according to IEC 60947-1 between all inputs and outputs
EMC/Interference Immunity The following requirements are fulfilled:
Surge capacity of the supply voltage
according to IEC 61000-4-5: Level 3
Burst according to IEC 61000-4-4: Level 3
ESD discharge according to IEC 61000-4-2: Level 3
EMC/Emmission electromagnetical fields according to EN 55 022: Class B
Safe Isolation according to VDE 106, Part 101
Climatic Withstand 56 cycles (24 hr) at 25…40 °C and 95% relative humidity according to IEC 60068-2-30 and IEC 60068-2-3
Vibration Resistance 4 g in three axes at 10…500 Hz, test FC according to IEC 60068-2-6
Shock Resistance 50 g according to IEC 68-2-27
Protection Class
IEC 947-1 		Enclosure:IP 40
Terminal:IP 20
Weight 60 g 60 g
Certifications cULus, CE Certified cULus, Germanischer Lloyd, CE Certified
Ambient Temperature Open:–25…+60 °C
Enclosed:–25…+45 °C
Storage:–40…+85 °C
Connections Screw terminal M3 for Pozidriv No.1, Philips and slotted screws No.2. suitable for power screw-driver.
Rated tightening torque 8.8 lb.-in. (max. 1.0 Nm)
For terminal cross-sections of 1 x 0.5 mm2…2 x 1.5 mm2 (solid) or 2 x 1.5 mm2 (stranded with sleeve), #20…14 AWG.
Finger protection according to VDE 0106
Mounting For surface mounting in any position; snap-on mounting on 35 mm DIN Rail or by adapter and two screws (M4 type)
Disposal Synthetic materials without dioxin according to EC/EFTA-Notification No. 93/0141/D
electrical contacts are AgCdO
  
¬ Voltage is either 24V DC or AC 50/60 Hz.