Bulletin 700-HV Timing Relay
| Product Overview |
|
Bulletin 700-HV
- Repeat Cycle Timing Relay
- 10 A Contact Rating
- DPDT
- Pin Style Terminals
- 0.1 s…30 min.
- Repeat Cycle Adjustable Timing
- Two Timing Adjustments T1 ¹ T2
Standards Compliance and Certifications
See Specifications.
Product Selection
| Build a Catalog Number |
Repeat Cycle Timing Relays with Pin Style Terminations with 2 Adjustments (T1 ¹ T2)
|
Operating Mode | Wiring Diagrams | |
| U.S./Canada | International | ||
| Repeat Cycle |
|
|
|
| Bulletin 700-HV Repeat Cycle Timing Relay DPDT 2-Pole — 2 Form C Contacts | Socket | 700-HN125 or 700-HN100 |
700-HN100 |
| 700 | – | HV | 3 | 2 | A | A | A2 | |||||
| a | b | c | d | e | f |
| a | |
| Timer Type | |
| Code | Description |
| HV | Tube Base Repeat Cycle Timing Relay |
| b | |
| Mode Type | |
| Code | Mode |
| 3 | Power ON Repeat Cycle, OFF Start (Repeat Cycle, OFF/ON Delay) |
| c | |
| Number of Poles | |
| Code | Description |
| 2 | 2PDT |
| d | |
| Timing Range | |
| Code | OFF Time — Type HV |
| A | 0.1…10 s |
| B | 1.0…100 s |
| C | 0.1…10 min |
| D | 1.0…100 min |
| E | 0.1…10 hr |
| e | |
| Timing Range | |
| Code | ON Time — Type HV |
| A | 0.1…10 s |
| B | 1.0…100 s |
| C | 0.1…10 min |
| D | 1.0…100 min |
| E | 0.1…10 hr |
| f | |
| Coil Voltage | |
| Code | Volts |
| U12 | 12V AC/DC, 50/60 Hz |
| U24 | 24V AC/DC, 50/60 Hz |
| U120 | 120V AC/DC, 50/60 Hz |
| A2 | 240V AC, 50/60 Hz |
Accessories
| Description | Pkg. Qty. | Cat. No. | |
|
Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HX Digital Timing Relays, -HT (On-Delay) and -HRM, -NRC and -HV (Repeat Cycle) Timing Relays. Order ten or multiples of ten | 10 | 700-HN100 |
| Cat. No. 700-HN100 | |||
|
DIN (#3) Symmetrical Rail 35 x 7.5 x 1 m |
10 | 199-DR1 |
| Cat. No. 199-DR1 | |||
|
Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Open Style Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HT (On-Delay) and -HRM, -HRC and -HV (Repeat Cycle) Timing Relays. Order must be for 10 sockets or multiples of 10. No retainer clip required. | 10 | 700-HN125 |
| Cat. No. 700-HN125 | |||
|
Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays. | 10 | 700-N40 |
| Blank Identification Tags — contains 10 sheets of blank identification tags for customer specialized printing. Each sheet contains 546 blank tags. Tags are peel-off with sticky backing for easy placement on relays. | 10 | 700-N41 | |
Bulletin 700-HV Repeat Cycle Timing Relay, Socket, and Retainer Clip Reference Chart
| Relay Type | Socket Cat. No. | Retainer Clip Cat. No. |
| 700-HV | 700-HN100 | 700-HN110 |
| 700-HN125 | Not Required¬ | |
| ¬ Design of these sockets holds the relays securely and does not require retainer clips. | ||
Specifications
| Cat. No. 700-HV… | |||||
| Electrical Ratings | |||||
| Pilot Duty RatingT | NEMA B300 | ||||
| Rated Thermal Current (Ith) | 10 A | ||||
| Rated Insulation Voltage (Ui) | 250V IEC, 300V UL/CSA | ||||
| Contacts | Inductive | Make | Break | Hp | |
|
|
||||
| 120V AC | 30 A | 3 A | 1/2 N.O. 1/3 N.C. | ||
| 240V AC | 15 A | 1.5 A | 1/2 N.O. 1/3 N.C. | ||
| Resistive 28V DC | 10 A | 10 A | — | ||
| Permissible Coil Voltage Variation | 85…110 of Nominal Voltage at 50 Hz 85…110 of Nominal Voltage at 60 Hz 80…110 of Nominal Voltage at DC |
||||
| Power Consumption ±10% |
AC | 24V AC | 2 VA | ||
| 120V AC | 4 VA | ||||
| 240V AC | 4 VA | ||||
| DC | 1.3 W | ||||
| Design Specification/Test Requirements | |||||
| Dielectric Withstand Voltage | Pole-to-Pole, same circuit (VRMS) | 1000V AC | |||
| Pole-to-Pole, different circuits (VRMS) | 2000V AC | ||||
| Contact-to-Coil (VRMS) | 2000V AC | ||||
| Electrical Life Operations | 100,000 minimum | ||||
| Switching Frequency Operations | 1800/hr | ||||
| Coil Voltages | See product selection | ||||
| Mechanical | |||||
| Degree of Protection | Open Type (Guarded Terminal Sockets) | ||||
| Mechanical Life Operations | 10 x 106 | ||||
| Switching Frequency Operations | 18,000/hr | ||||
| Timing | Duty Cycle | Continuous | |||
| Repeat Accuracy (constant voltage and temperature) |
±2% (Time Delay: 0.1…2 s) ±1% (Time Delay: >2 s) |
||||
| Repeat Accuracy (variable voltage and temperature) |
±10% | ||||
| Scale Tolerance | High End of Range | +5% | |||
| Low End of Range | -50% | ||||
| Reset Time | 100 ms | ||||
| Environmental | |||||
| Temperature | Operating | –28…+65 °C (50 °C max., 240V AC coil) (–18…+149 °F) (122 °F max., 240V AC coil) |
|||
| Storage | –55…+85 °C (–67…+185 °F) |
||||
| Altitude | 2000 m (6560 ft.) | ||||
| Construction | |||||
| Insulating Material | Molded High Dielectric Material | ||||
| Enclosure | Impact Resistant Dust Cover | ||||
| Contact Material | Silver Cadmium Oxide | ||||
| Terminal Markings on Socket | In accordance with EN50 005 | ||||
| Sockets | 8-Pin Socket Cat. No. 700-HN100, -HN125 |
||||
| Certifications | CSA Certified, File 223833; UL Recognized, File E3125; Guide NLDX 2; cULus Listed when used with 700-HN100 and 700-HN125 sockets; CE Marked | ||||
| Standards | EN 61812; EN 60947-1, -5-1; CSA 22.2 No. 14; UL 508 | ||||
| ¬ Performance Data — See Performance Data, this catalog. | |||||
| T NEMA Rating Chart is in publication 700-SG003B-EN-P._ | |||||
Timing Diagram
|
Approximate Dimensions
Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes.
|
|
| Cat. No. | A | B | C | D | Approx. Shipping Wt. |
| 199-DR1 | 35 (1-3/8) |
27 (1-1/16) |
7.5 (19/64) |
1.02 (1/64) |
1.85 kg (4.07 lbs.) (10/pkg) |
| 199-DR4 | 35 (1-3/8) |
27 (1-1/16) |
15 (19/32) |
2.3 (3/32) |
3.68 kg (8 lbs.) (5/pkg) |
|
|
