General Purpose Electronic Timers and Counters

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Electronic Timers and Counters > Bulletin 700-HV Timing Relay

Bulletin 700-HV Timing Relay

Introduction Standards Compliance and Certifications Product Selection Accessories Specifications Approximate Dimensions
Accessories

  Description Pkg. Qty. Cat. No.
Click to enlarge - 700SA-32-1 Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HX Digital Timing Relays, -HT (On-Delay) and -HRM, -NRC and -HV (Repeat Cycle) Timing Relays. Order ten or multiples of ten 10 700-HN100
Cat. No. 700-HN100
Click to enlarge - 700SA-32-4 DIN (#3) Symmetrical Rail
35 x 7.5 x 1 m 		10 199-DR1
Cat. No. 199-DR1
Click to enlarge - 700SA-32-3 Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Open Style Construction. 8-Pin for use with DPDT Bulletin 700-HA Relays, -HT (On-Delay) and -HRM, -HRC and -HV (Repeat Cycle) Timing Relays. Order must be for 10 sockets or multiples of 10. No retainer clip required. 10 700-HN125
Cat. No. 700-HN125
Click to enlarge - 700SA-32-5 Pre-Printed Identification Tags — contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags. Tags are peel-off with sticky backing for easy placement on relays. 10 700-N40
Blank Identification Tags — contains 10 sheets of blank identification tags for customer specialized printing. Each sheet contains 546 blank tags. Tags are peel-off with sticky backing for easy placement on relays. 10 700-N41
  

Bulletin 700-HV Repeat Cycle Timing Relay, Socket, and Retainer Clip Reference Chart

Relay Type Socket Cat. No. Retainer Clip Cat. No.
700-HV 700-HN100 700-HN110
700-HN125 Not Required¬ 
  
¬ Design of these sockets holds the relays securely and does not require retainer clips.