Bulletin 700-HNC Miniature Timing Relay
| Product Overview |
|
Bulletin 700-HNC
- Miniature timer, perfect for converting Bul. 700-HC "Ice Cube" relays into timing relays
- 4 operating modes
- 4PDT contact output
- Timing range from 0.1 s…10 hr
- Socket mounted
Standards Compliance and Certifications
See Specifications.
Product Selection
| Build a Catalog Number |
Bulletin 700-HNC Miniature Timer with Multiple Time Ranges
| Model | Timing Mode | Contact Output | Input Voltages | Timing Range | Socket Type | Cat. No. |
|
On-Delay One Shot Repeat cycle, OFF-start Repeat cycle, ON-start |
4PDT | 12V DC | .1 s…10 min | 700-HN103 700-HN128 |
700-HNC44AZ12 |
| .1 min…10 hr | 700-HNC44BZ12 | |||||
| 24V DC | .1 s…10 min | 700-HNC44AZ24 | ||||
| .1 min…10 hr | 700-HNC44BZ24 | |||||
| 48V DC | .1 s…10 min | 700-HNC44AZ48 | ||||
| .1 min.…10 hr | 700-HNC44BZ48 | |||||
| 100…110V DC | .1 s…10 min | 700-HNC44AZ11 | ||||
| .1 min…10 hr | 700-HNC44BZ11 | |||||
| 125V DC | .1 s…10 min | 700-HNC44AZ25 | ||||
| .1 min.…10 hr | 700-HNC44BZ25 | |||||
| 24V AC | .1 s…10 min | 700-HNC44AA24 | ||||
| .1 min.…10 hr | 700-HNC44BA24 | |||||
| 100…120V AC | .1 s…10 min | 700-HNC44AA12 | ||||
| .1 min.…10 hr | 700-HNC44BA12 | |||||
| 200…230V AC | .1 s…10 min | 700-HNC44AA23 | ||||
| Cat. No. 700-HNC | .1 min.…10 hr | 700-HNC44BA23 | ||||
General Timer Functions
|
Accessories
| Description | Pkg. Quantity | Cat. No. | |
|
Screw Terminal Socket — Panel or DIN Rail Mounting. Guarded Terminal Construction 14-Blade miniature socket for use with Bulletin 700-HNC timers. |
10 | 700-HN103 |
| Cat. No. 700-HN103 | |||
|
Screw Terminal Base Sockets — Panel or DIN Rail Mounting. Open Style Construction 14-blade miniature socket for use with Bulletin 700-HNC timers. |
10 | 700-HN128 |
| Cat. No. 700-HN128 | |||
| Description | Pkg. Quantity | Cat. No. | |
|
Screw Terminal Socket – Panel or DIN Rail Mounting. Guarded Terminal Construction 14-blade miniature socket for use with Bulletin 700-HNC timers. This socket has coil and contact separation. | 10 | 700-HN104 |
| Cat. No. 700-HN104 | |||
|
Retainer Clip for Cat. Nos. 700-HN103, -HN104 and -HN128 Sockets with Bulletin 700-HNC Timers. Secures Timer in Socket. | 10 | 700-HN163 |
| Cat. No. 700-HN163 | |||
Specifications
| Ratings | ||||
| Item | 700-HNC | |||
| Pilot Duty Rating | NEMA B300 | |||
| Pin type | Plug-in | |||
| Operating voltage range | 85%…110% of rated supply voltage (12V DC: 90%…110% of rated supply voltage)T | |||
| Reset voltage | 10% min. of rated supply voltage‡ | |||
| Power consumption | 24V AC: | Relay ON: Relay OFF: |
1.5 VA (1.1 W) (at 24V AC, 60 Hz) 0.2 VA (0.1 W) (at 24V AC, 60 Hz) |
|
| 100…120V AC: | Relay ON: Relay OFF: |
1.5 VA (1.3 W) (at 120V AC, 60 Hz) 0.8 VA (0.5 W) (at 120V AC, 60 Hz) |
||
| 200…230V AC: | Relay ON: Relay OFF: |
1.8 VA (1.5 W) (at 230V AC, 60 Hz) 1.2 VA (0.9 W) (at 230V AC, 60 Hz) |
||
| 12V DC: | Relay ON: Relay OFF: |
0.9 W (at 12V DC) 0.07 W (at 12V DC) |
||
| 24V DC: | Relay ON: Relay OFF: |
0.9 W (at 24V DC) 0.07 W (at 24V DC) |
||
| 48V DC: | Relay ON: Relay OFF: |
1.0 W (at 48V DC) 0.2 W (at 48V DC) |
||
| 100…110V DC: | Relay ON: Relay OFF: |
1.3 W (at 110V DC) 0.3 W (at 110V DC) |
||
| 125V DC: | Relay ON: Relay OFF: |
1.3 W (at 125V DC) 0.3 W (at 125V DC) |
||
| Control outputs | 4PDT: 5 A at 250V AC, resistive load (cosf = 1) | |||
| Characteristics | ||||
|
120V AC | 30 A | ||
| Make | 240V AC | 15 A | ||
|
120V AC | 3 A | ||
| Break | 240V AC | 1.5 A | ||
| Hp at 120V AC | 1/6 Hp | |||
| Hp at 240V AC | 1/6 Hp | |||
| Accuracy of operating time | ±1% FS max. (1 s range: ±1%±10 ms max.) | |||
| Setting error | ±10%±50 ms FS max. | |||
| Reset time | Min. power-opening time: 0.1 s max. (including halfway reset) | |||
| Influence of voltage | ±2% FS max. | |||
| Influence of temperature | ±2% FS max. | |||
| Insulation resistance | 100 mW min. (at 500V DC) | |||
| Dielectric strength | 2000V AC, 50/60 Hz for 1 min (between current-carrying terminals and exposed non-current-carrying metal parts)¬ | |||
| 2000V AC, 50/60 Hz for 1 min (between operating power circuit and control output) | ||||
| 2000V AC, 50/60 Hz for 1 min (between different pole contacts; 2-pole model) | ||||
| 1500V AC, 50/60 Hz for 1 min (between different pole contacts; 4-pole model) | ||||
| 1000V AC, 50/60 Hz for 1 min (between non-continuous contacts) | ||||
| Vibration resistance | Malfunction:10…55 Hz, 0.5 mm single amplitude | |||
| Shock resistance | Malfunction:100 m/s2 (approx. 10G) | |||
| Ambient temperature | Operating:-10 °C…50 °C (with no icing) | |||
| Storage:-25 °C…65 °C (with no icing) | ||||
| Ambient humidity | Operating:35%…85% | |||
| Life expectancy | Mechanical:10 000 000 operations min. (under no load at 1800 operations/hr) | |||
| Electrical:4PDT: | ||||
| 200 000 operations min. (3 A at 250V AC, resistive load at 1800 operations/hr) | ||||
| ¬ Single-phase, full-wave-rectified power supplies can be used. | ||||
| T When using the 700-HNC continuously in any place where the ambient temperature is in a range of 45 °C…50 °C, supply 90%…110% of the rated supply voltages supply 95%…110% with 12V DC type). | ||||
| Characteristics, Continued | |
| Noise immunity | ±1.5 kV, square-wave noise by noise simulator (pulse width: 100 ns/1 ms, 1-ns rise) |
| Static immunity | Destruction:8 kV Malfunction:4 kV |
| Enclosure rating | IP40 |
| Weight | Approx. 50 g |
| EMC | Emission Enclosure:EN55011 Group 1 class A |
| Emission AC Mains:EN55011 Group 1 class A | |
| Immunity ESD:EN61000-4-2:4 kV contact discharge (level 2) | |
| 8 kV air discharge (level 3) | |
| Immunity RF-interference:ENV50140:10 V/m (amplitude modulated, 80 MHz to 1 GHz) (level 3) | |
| 10 V/m (pulse modulated, 900 MHz) | |
| Immunity Conducted Disturbance:ENV50141:10 V (0.15…80 MHz) (level 3) | |
| Immunity Burst:EN61000-4-4:2 kV power-line (level 3) | |
| 2 kV I/O signal-line (level 4) | |
| Standards | UL 508, CSA 22.2 No. 14, EN/IEC 61812-1 |
| Certifications | cURus Recognized (File No. E14843, Guide NRNT2/NRNT8), CSA Certified (File 224268), CE Marked, C-Tick Marked |
Timing Charts
Note:t:Set time
Rt:Reset time
| Operating Mode | Timing Charts / Wiring Diagram | |
|
|
|
|
|
|
|
|
|
|
|
|
Pulse Operation
A pulse output for a certain period can be obtained with a random external input signal. Use the 700-HNC timing relay in interval mode as shown in the following timing charts.
|
|
DIP Switch Settings
Time Ranges
| Cat. No. | Time Range | Time Setting Range | Setting | Factory-Set |
| 700-HNC44AZ12 700-HNC44AZ24 700-HNC44AZ48 700-HNC44AZ11 700-HNC44AZ25 700-HNC44AA24 700-HNC44AA12 700-HNC44AA23 |
1 s | 0.1 s…1 s |
|
Yes |
| 10 s | 1 s…10 s |
|
No | |
| 1 min | 0.1 s…1 min |
|
No | |
| 10 min | 1…10 min |
|
No | |
| 700-HNC44BZ12 700-HNC44BZ24 700-HNC44BZ48 700-HNC44BZ11 700-HNC44BZ25 700-HNC44BA24 700-HNC44BA12 700-HNC44BA23 |
1 min | 0.1…1 min |
|
Yes |
| 10 min | 1…10 min |
|
No | |
| 1 hr | 0.1…1 hr |
|
No | |
| 1 hr | 1…10 hr |
|
No | |
Note: The top two DIP switch pins are used to select the time ranges.
|
Operating Modes
| Operating Mode | Setting | Factory-set |
| ON-delay |
|
Yes |
| One Shot |
|
No |
| Repeat Cycle OFF-start |
|
No |
| Repeat Cycle ON-start |
|
No |
Note: The bottom two DIP switch pins are used to select the time ranges.
Approximate Dimensions
Approximate Dimensions are shown in millimeters (inches) where not specified. Approximate Dimensions are not intended to be used for manufacturing purposes.
Timers
Front Mounting
|
|
|
¬ Total height of 700-HN128 + 700-HNC is 82.5 mm.
|
