General Purpose Electronic Timers and Counters

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Electronic Timers and Counters > Bulletin 700-HS Timing Relay

Bulletin 700-HS Timing Relay

Specifications

			Cat. No. 700-HS…			Cat. No. 700-HSF…
Electrical Ratings
Pilot Duty Rating T			NEMA B300
Rated Thermal Current (Ith)			12 A
Rated Insulation Voltage (Ui)			250V IEC, 300V UL/CSA
Contacts		Inductive	Make	Break	Hp	Make	Break	Hp
		120V AC	30 A	3 A	1/3	30 A	3 A	1/3
		240V AC	15 A	1.5 A	1/2	15 A	1.5 A	1/2
		Resistive 30V DC	12 A	12 A	—	12 A	12 A	—
Permissible Coil Voltage Variation			85…110% of Nominal Voltage at 50 Hz 85…110% of Nominal Voltage at 60 Hz 80…110% of Nominal Voltage at DC
Power Consumption ±10%	AC	24V AC	2 VA
		120V AC	3 VA
		240V AC	—
	DC		1.3 W
Design Specification/Test Requirements
Dielectric Withstand Voltage		Pole-to-Pole, same circuit (VRMS)	1000V AC
		Pole-to-Pole, different circuits (VRMS)	2000V AC
		Contact-to-Coil (VRMS)	2000V AC
Electrical Life Operations			100,000 minimum
Switching Frequency Operations			360/hr
Coil Voltages			See product selection
Mechanical
Degree of Protection			Open Type (Guarded Terminal Sockets)
Mechanical Life Operations			10 x 106
Switching Frequency Operations			18,000/hr
Timing		Duty Cycle	Continuous
Repeat Accuracy (constant voltage and temperature)			±2% (Time Delay: 0.1…2 s) ±1% (Time Delay: >2 s)
Repeat Accuracy (variable voltage and temperature)			±15%
Fixed Time Setting Accuracy			—			±2% (Time Delay: 0.1…2 s) ±1% (Time Delay: >2 s)
Scale Tolerance		High End of Range	+5%			—
		Low End of Range	–50%			—
Reset Time		ON Delay	100 ms
		OFF Delay	40 ms
Environmental
Temperature		Operating	–28…+65 °C (–18…+149 °F)
		Storage	–55…+85 °C (–67…+185 °F)
Altitude			2000 m (6560 ft)
Construction
Insulating Material			Molded High Dielectric Material
Enclosure			Impact Resistant Dust Cover
Contact Material			Silver Nickel
Terminal Markings on Socket			In accordance with EN 50 005
Sockets			8- or 11-Blade (On = 8, Off = 11) 700-HN153 -HN154
Certifications			CSA Certified, File 233833, UL Recognized, File E3125 Guide NLDX 2, cUus Listed when used with 700-HN153 and 700-HN154 sockets (File E3125, Guide NLDX/NLDX7), CE Marked
Standards			EN 61812, EN 60947-5-1, CSA 22.2, UL 508
¬ See Performance Data.
T NEMA Rating Chart is on page 19 of publication 700-SG003B-EN-P.

Trigger Signal Cat. Nos. 700-HT / -HS

Contact closure provides signal to timer. A low energy signal is generated by the 700-HT / -HS timing relay. For optimum reliability, use contacts designed for low energy switching (10V, 1 mA) (Bul. 800F-X__V, 800T-X__V). No external voltage should be connected to the contact signal.

Timing Diagrams

ON Delay

OFF Delay