General Purpose Electronic Timers and Counters

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Electronic Timers and Counters > Bulletin 700-HX Multifunction Digital Timing Relay

Bulletin 700-HX Multifunction Digital Timing Relay

Specifications

Electrical Ratings
Pilot Duty Rating		NEMA B300
Rated supply voltage		100 to 240V AC, 24V AC/12 to 24V DC (50/60Hz) (permissible ripple: 20%(p-p) max.)
Operating voltage range		85…110% of rated supply voltage
Power consumption	100…240V AC	4.3VA
	24V AC/12…24V DC	3.4VA/1.7 W
Inrush Current	100…240V AC	3 A
	24V AC/12…24V DC	5 A
	120V AC	30 A
Make	240V AC	15 A
	120V AC	3 A
Break	240V AC	1.5 A
Hp at 120V AC		1/4 Hp
Hp at 240V AC		1/3 Hp
Mechanical
Mounting Method		Flush mounting, surface mounting, DIN mounting
Display		Seven-segment, negative transmissive LCD; Present value (red, 12 mm high characters); Set value (green, 6 mm high characters)
Digits		Four digits
Timer	Time ranges	0.000…9.999 s, 0.00…99.99 s, 0.0…999.9 s, 0…9999 s, 0 min 00 s…99 min 59 s, 0.0…999.9 min, 0 hr 00 min…99 hr 59 min, 0.0 hr…999.9 hr, 0 hr…9999 hr
	Timer modes	Elapsed time (Up), remaining time (Down), selectable
	Output modes	A, A-1, A-2, A-3, B, B-1, D, E, F, Z, S, tOFF, tON, tOFF-1, or tON-1
Inputs	Input signals	Start, reset
	Input method	No-voltage input via:NPN transistor or switching of contact
	Start, reset, gate	Minimum input signal width: 1 or 20 ms (selectable)
	Power reset	Minimum power-opening time: 0.5 s (Except for A-3, B-1, and F mode)
Control output		SPDT contact output: 5 A at 250V AC, resistive load (cosine=1) Minimum applied load: 10 mA at 5 V DC (failure level: P, reference value)
External Power Supply		No
Key Protect		Yes
Memory Backup		EEP-ROM (overwritten 100 000 times min), which can store data for 10 years min.
Accuracy of Operating Time and Setting Error⋆		Power-ON start: +-0.01% +-50 ms max. * to be rated against set value Signal start: +- 0.005% +-30 ms max. * to be rated against set value Signal start at transistor output model: +- 0.005% +-3 ms max.‡  If the set value is within the sensor waiting time (250 ms max.)
⋆ The values are based on the set value.
‡ The value is applied for a minimum pulse width of 1 ms.

Characteristics⋆
Insulation Resistance		100 mW min. (at 500V DC)
Dielectric Strength		2000V AC, 50/60Hz for 1 min between current-carrying terminals and non-current-carrying metal parts (1000V AC for 24V AC/12 to 24V DC type), 1000 VAC, 50/60 Hz for 1 min between non-continuous contacts
Noise Immunity		'+-1.5 kV (between power terminals) for 100 to 240 VAC, +-480V for 24VAC/12 to 24VDC, and +-600V (between input terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 ms, 1-ns rise)
Static Immunity		±8 kV (malfunction), ±15 kV (destruction)
Vibration Resistance	Malfunction	10…55 Hz with 0.35 mm single amplitude each in three directions for 10 min
Shock Resistance	Malfunction	98 m/s2 (approx. 10 G) each in three directions
Life Expectancy	Mechanical	10 million operations min. (under no load at 18 000 operation/hr)
	Electrical	100 000 operations min. (5 A at 250V AC, resistive load at 1800 operation/hr)
EMC	(EMI)	EN61812-1
	Emission Enclosure:	EN55011 Group1 class A
	Emission AC mains:	EN55011 Group1 class A
	(EMS)	EN61812-1
	Immunity ESD:	EN61000-4-2: 4 kV contact discharge (level2) 8 kV air discharge (level3)
	Immunity RF-interference:	EN61000-4-3: 10 V/m
Enclosure Ratings		Panel surface:IP66 and NEMA Type 4X (indoors)‡
Weight		Approx. 100 g
Certifications		CE Certified; cURus (File No. E14843, Guide NRNTZ/NRNT8), C-Tick Marked
Standards		EN61010-1, EN 61326, VDE0106/P 100, CSA C22.2 No. 14, UL 508
⋆ 700-HX User Manual, pub. number 700-UM002_-EN-D, available at Literature Library.
‡ An attached waterproof packing is necessary to ensure IP66 waterproofing between the 700-HX and installation pan.

Timing Charts

Output Mode A Mode: Signal ON-Delay (Timer resets when power comes ON.)
Output Mode A-1: Signal ON-Delay 2 (Timer resets when power comes ON.)
Output Mode A-2: Power ON Delay 1 (Timer resets when power comes ON)
Output Mode A-3 Power ON Delay 2 (Timer does not reset when power comes ON)
⋆ Gate not included on any mode of this relay.

Output Mode B: Repeat Cycle (Timer resets when power comes ON.)
Output Mode B-1: Repeat Cycle 2 (Timer does not reset when power comes ON)
⋆ Gate not included on any mode of this relay.

Output Mode D: Signal OFF-Delay (Timer resets when power comes ON.)
Output Mode E: Interval (Timer resets when power comes ON.)
Output Mode F: Cumulative (Timer does not reset when power comes ON)
⋆ Gate not included on any mode of this relay.

Z Mode

Output quantity can be adjusted by changing the cycle time set in the adjustment level to 1 and by changing the ON duty (%) set value. The set value shows the ON duty (%) and can be set to a value between 0 and 100 (%). When the cycle time is 0, the output will always be OFF. When the cycle time is not 0 and when ON duty has been set to 0 (%), the output will always be OFF. When ON duty has been set to 100 (%), the output will always be ON.

Z mode: ON/OFF-duty Adjustable Repeat Cycle
Output Mode S: Stop Watch (Timer resets when power comes ON)
Output Mode T OFF: Twin Timer OFF start
⋆ Gate not included on any mode of this Relay.

Output Mode T ON: Twin Timer ON start
Output Mode TOFF-1: Flicker OFF start 2 (Timer does not reset when power comes ON)
Output Mode TON-1: Flicker ON start 2 (Timer does not reset when power comes ON)
⋆ Gate not included on any mode of this Relay.