Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > General Purpose Electronic Timers and Counters > Bulletin 700-HTA Alternating Relay
Bulletin 700-HTA Alternating Relay
| Introduction |  |
Standards Compliance and Certifications | |
Product Selection | |
Accessories | |
Specifications | |
Approximate Dimensions | |
| Cat. No. 700-HTA… | |||||
| Electrical Ratings | |||||
| Pilot Duty RatingT | NEMA B300 AC 15 | ||||
| Rated Thermal Current (Ith) | 10 A | ||||
| Rated Insulation Voltage (Ui) | 250V IEC, 300V UL/CSA | ||||
| Contacts | Inductive | Make | Break | HP | |
|
|
||||
| 120V AC | 30 A | 3 A | 1/3 | ||
| 240V AC | 15 A | 1.5 A | 1/2 | ||
| Resistive 30V DC | 10 A | 10 A | — | ||
| Permissible Coil Voltage Variation | 85…110% of Nominal Voltage at 50 Hz 85…110% of Nominal Voltage at 60 Hz |
||||
| Power Consumption ±10% | AC | 24V AC | 2 VA | ||
| 120V AC | 4 VA | ||||
| 240V AC | 4 VA | ||||
| Design Specification/Test Requirements | |||||
| Dielectric Withstand Voltage | Pole-to-Pole, same circuit (VRMS) | 1000V AC | |||
| Pole-to-Pole, different circuits (VRMS) | 2000V AC | ||||
| Contact-to-Coil (VRMS) | 2000V AC | ||||
| Electrical Life Operations | 100,000 minimum | ||||
| Switching Frequency Operations | 1800/hr | ||||
| Coil Voltages | See product selection | ||||
| Mechanical | |||||
| Degree of Protection | Open Type (Guarded Terminal Sockets) | ||||
| Mechanical Life Operations | 10 x 106 | ||||
| Switching Frequency Operations | 18,000/hr | ||||
| Start-up Time (max. time from power application until unit is timing) | 0.05 sec | ||||
| Max. Function Time (max. time power can drop out and unit continues timing) | 0.01 sec | ||||
| Min. Cycle Time | 100 ms on release of the control switch | ||||
| Environmental | |||||
| Temperature | Operating | –28…+65 °C (50 °C max., 240V AC coil) (–18…+149 °F) (122 °F max., 240V AC coil) |
|||
| Storage | –55…+85 °C (–67…+185 °F) |
||||
| Altitude | 2000 m (6560 ft) | ||||
| Construction | |||||
| Insulating Material | Molded High Dielectric Material | ||||
| Enclosure | Impact Resistant Dust Cover | ||||
| Contact Material | Silver Tin Oxide | ||||
| Terminal Markings on Socket | In accordance with EN50 005 | ||||
| Sockets | 8- or 11-Pin Socket 700-HN100, -HN125 700-HN101, -HN126 |
||||
| Certifications | CSA Certified, File 223833, UL Recognized (File E3125 Guide NLDX2/NLDX8), cULus Listed with 700-HN100, 700-HN101, 700-HN125, and 700-HN126 Sockets (File No. E3125 Guide NLDX/NLDX7), CE-Marked (per EU Low Voltage Directive) | ||||
| Standards | EN 61812-1, EN/IEC 60947-1, -5-1, CSA 22.2 No. 14, UL 508 | ||||
| ¬ Performance Data — See Performance Data, this catalog. | |||||
| T NEMA Rating Chart is in publication 700-SG003_-EN-P. | |||||
Trigger Signal Cat. Nos. 700-HTA
Contact closure provides signal to timer. A low energy signal is generated by the 700-HTA alternating relay. For optimum reliability, use contacts designed for low energy switching (10V, 1 mA) (Example: Bul. 800F-X__V, 800T-X__V). No external voltage should be connected to the contact signal.
Load Diagrams
|
|
