Bulletin 700-PS Solid-State Timing Relay

Bulletin 700-PS

• Solid-state timer
  
• 600V AC maximum, 300V DC maximum
  
• Time range 0.1…120 sec
  
• Can be attached to a Bulletin 700 Type P, PK, R and RM relay
  
• Convertible to ON-Delay or OFF-Delay
  

Standards Compliance

• UL 508
  UL 1604
  
• CSA C22.2 No. 14
  C22.2 No. 213
  

Certifications

• cULus Listed (File No. E10319, Guide NOIV/NOIV7)
  CSA Certified (File No. LR11924)
  

Product Selection

Bulletin 700-PS

	Operating Mode	Timing Range¬ [s]	Timing Relay with Self-Contained Potentiometer Unit	Timing Relay for Use with External Potentiometer Unit
			Cat. No.	Cat. No.
	On-Delay	0.1…2	700-PSAA1	700-PSRAA1
		0.4…8	700-PSBA1	700-PSRBA1
		1.5…30	700-PSCA1	700-PSRCA1
		6…120	700-PSDA1	700-PSRDA1
	Off-Delay	0.1…2	700-PSPA1	700-PSRPA1
		0.4…8	700-PSRA1	700-PSRRA1
Cat. No. 700-PSPA1		1.5…30	700-PSTA1	700-PSRTA1
		6…120	700-PSUA1	700-PSRUA1
¬ The maximum range may be 50% greater and the minimum range may be 50% less than the values specified.
T All Cat. Nos. are factory stocked

Accessories

Accessories

	Description			Cat. No.
	Adapter Plate — For mounting Bulletin 700-PS timers directly on a panel or on Bulletin 700-MP universal mounting strips.			700-N25
	Adapter for Bulletin 700-R, -RM Relays Allows you to mount the Bulletin 700-PS timer on a 1…4 pole Bulletin 700-R or -RM relay.			700-N26
		Timing Range¬	Resistance[mW]
Cat. No. 700-N25		0.1…2 (0.4…8)	0.75	T	700-N35
		0.1…2 (0.4…8)	0.75	T	700-N35
		1.5…30	2.0	T	700-N36
Cat. No. 700-N26		6…120	3.5	T	700-N37
T This Cat. No. includes only the potentiometer. Order Cat. No. 800T-N37 for the potentiometer operator and housing.

Specifications

Bulletin 700-PS

Supply Voltage	110…120V AC, 50/60 Hz
Power Requirement	4 VA, 2.5 W
Output Contact Ratings	NEMA B600 and P300. See pub. 700-SG003_-EN-P.
Operating Temperature Range	–20…+60 °C ambient (–4…+140 °F)
Reset Time	20 ms
Repeat Accuracy, Constant Voltage and Temperature	±2% of setting or ±0.004 s, whichever is greater
Standards	NEMA B600, NEMA P300
Certifications	UL Listed, Class I, Division 2, Groups A, B, C, and D, CSA Certified

Operation

The timer must be energized continuously (L1-L2). ON-Delay: When the initiating contact closes, timing begins. At time-out, the output contact closes. OFF-Delay: When the initiating contact closes, the output contact closes instantly. When the initiating contact re-opens, timing begins. At time-out, the output contact re-opens.

Typical Wiring Diagram¬ 



Attention — To avoid damage to timer, do not switch any load in addition to timing relay at terminals S1–S2. Do not apply an external voltage to terminals S1–S2.

¬ External Potentiometer units have R1, R2 terminals for connecting the potentiometer.

Approximate Dimensions

Dimensions are shown in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Bulletin 700-PS

Bulletin 700-PS Timer Mounted on the Adapter PlateCat. No. 700-N25Approximate Shipping Wt. 0.45 kg (1 lb)

Bulletin 700-PS Timer Mounted on a 4-PoleBulletin 700-P or -PK, or 2-Pole Bulletin 700-PH RelayApproximate Shipping Wt. 1.02 kg (2.3 lb)

Bulletin 700-PS Timer Mounted on a 4-PoleBulletin 700-R or -RM RelayApproximate Shipping Wt. 1.25 kg (2.8 lb)