NEMA Heavy-Duty Industrial Relays

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > Industrial Relays and Timers > NEMA Heavy-Duty Industrial Relays > Bulletin 700-RTC Solid-State Timing Relay

Bulletin 700-RTC Solid-State Timing Relay

Specifications

Voltage and Power Requirements

AC Voltage +10% –15% 50/60 Hz	Total Power Required	Initiate Terminal Power	Maximum Allowable Leakage Current	Coil Code
24V AC	8 VA	4 VA	10 mA	U24
110/120V AC	9 VA	4 VA	2.4 mA	U1

DC Voltage +10% –20%	Total Power Required	Initiate Terminal Power	Maximum Allowable Leakage Current	Coil Code
24V DC	10 W	5 W	10 mA	U24
120V DC	11 W	5 W	2.4 mA	U1

Type	700-RTC
Contact Rating (See pub. 700-SG003*)	NEMA B600 600V AC, 5 A NEMA P300 300V DC, 5 A
Contact Arrangement	1…4 poles. Max. of 2 timed and 2 instantaneous. Available in any combination of N.O. and N.C. contacts
Contact Material	W (tungsten in a controlled gas atmosphere)
Operating Mode	Convertible to ON-Delay or OFF-Delay
Timing Range	0.05…64 min.
Reset Time	25 ms
Repeat Accuracy	±1% (or ±50 ms) at constant voltage and temperature
Mounting	Panel or strip mount
Surge Suppression	Not required. Timers have internal suppression
Certifications	UL Listed, File E10314, Guide NOIV, CSA Certified, File LR11924 Suitable for use in Class I, Division 2, Groups A, B, C, and D
Maximum Allowable Leakage Current	24V AC/DC	10 mA
	110/120V AC, 120V DC	2.4 mA
Ambient Temperature⋆
Operating:	–20…+60 °C (–4…+140 °F)
Storage:	–20…+60 °C (–4…+140 °F)
⋆ Continuous duty units placed close to each other (3 in a row) have a temperature range of –20…+45 °C (–4…+113 °F) or should have air circulated around the units. Approximate space of 3/4 in (mm) on all sides is needed.

Typical Wiring Diagram