Bulletin 700-R -RM Sealed Switch Relays

Product Overview


Click to enlarge - 700RRM-229-1


Bulletin 700-R, -RM — Sealed Switch Relays


Standards Compliance and Certifications


Product Selection

Build a Catalog Number


No.
of
Poles 		Electrically Held
Contacts Contact Arrangement
and Markings‡  		AC-Operated Relay Only DC-Operated Relay Only
Open Type Open Type
N.O. N.C. Cat. No. Cat. No.
0 0 0 Relay without Contact 700-R000Ä 700DC-R000Ä
2 2 0 Click to enlarge - 700RRM-230-1 700-R200Ä 700DC-R200Ä
1 1 700-R110Ä 700DC-R110Ä
0 2 700-R020Ä 700DC-R020Ä
4 4 0 700-R400Ä 700DC-R400Ä
3 1 700-R310Ä 700DC-R310Ä
2 2 700-R220Ä 700DC-R220Ä
1 3 700-R130Ä 700DC-R130Ä
0 4 700-R040Ä 700DC-R040Ä
6 6 0 Click to enlarge - 700RRM-230-2 700-R600Ä 700DC-R600Ä
5 1 700-R510Ä 700DC-R510Ä
4 2 700-R420Ä 700DC-R420Ä
3 3 700-R330Ä 700DC-R330Ä
2 4 700-R240Ä 700DC-R240Ä
1 5 700-R150Ä 700DC-R150Ä
0 6 700-R060Ä 700DC-R060Ä
8 8 0 700-R800Ä 700DC-R800Ä
7 1 700-R710Ä 700DC-R710Ä
6 2 700-R620Ä 700DC-R620Ä
5 3 700-R530Ä 700DC-R530Ä
4 4 700-R440Ä 700DC-R440Ä
3 5 700-R350Ä 700DC-R350Ä
2 6 700-R260Ä 700DC-R260Ä
1 7 700-R170Ä 700DC-R170Ä
0 8 700-R080Ä 700DC-R080Ä
  

Ä Coil Voltage Code

The Cat. No. as listed is incomplete. Select a voltage code from the table below to complete the Cat. No. Example: Cat. No. 700-R000Ä becomes Cat. No. 700-R000A24. For other coil voltages, contact your local Rockwell Automation sales office or Allen-Bradley distributor.

Type of Relay [V] Coil Volts
24 48 110 115-125 120 220 230-250 240
AC 25 Hz — — C11 — C1 — — C2
50 Hz B24 B48 A1 — — A2 — —
60 Hz A24 A48 — — A1 — — A2
DC — Z24 Z48 — Z1 — — Z2 —
  
‡ Arrangement displays all N.O. contacts.
♣ Polarity must be observed for DC voltage (700 DC) relays.
∆ Location of contacts in 2-pole relays.
♦ Location of contacts in 6-pole relays.

No.
of
Poles 		Magnetic Latch
Contacts Contact Arrangement
and Markings ‡  		AC-Operated Relay Only DC-Operated Relay Only
Open Type Open Type
N.O. N.C. Cat. No. Cat. No.
0 0 0 Relay without Contact 700-RM000Ä 700DC-RM000Ä
2 2 0 Click to enlarge - 700RRM-231-1 700-RM200Ä 700DC-RM200Ä
1 1 700-RM110Ä 700DC-RM110Ä
0 2 700-RM020Ä 700DC-RM020Ä
4 4 0 700-RM400Ä 700DC-RM400Ä
3 1 700-RM310Ä 700DC-RM310Ä
2 2 700-RM220Ä 700DC-RM220Ä
1 3 700-RM130Ä 700DC-RM130Ä
0 4 700-RM040Ä 700DC-RM040Ä
6 6 0 Click to enlarge - 700RRM-231-2 700-RM600Ä 700DC-RM600Ä
5 1 700-RM510Ä 700DC-RM510Ä
4 2 700-RM420Ä 700DC-RM420Ä
3 3 700-RM330Ä 700DC-RM330Ä
2 4 700-RM240Ä 700DC-RM240Ä
1 5 700-RM150Ä 700DC-RM150Ä
0 6 700-RM060Ä 700DC-RM060Ä
8 8 0 700-RM800Ä 700DC-RM800Ä
7 1 700-RM710Ä 700DC-RM710Ä
6 2 700-RM620Ä 700DC-RM620Ä
5 3 700-RM530Ä 700DC-RM530Ä
4 4 700-RM440Ä 700DC-RM440Ä
3 5 700-RM350Ä 700DC-RM350Ä
2 6 700-RM260Ä 700DC-RM260Ä
1 7 700-RM170Ä 700DC-RM170Ä
0 8 700-RM080Ä 700DC-RM080Ä
  

Ä Coil Voltage Code

The Cat. No. as listed is incomplete. Select a voltage code from the table below to complete the Cat. No. Example: Cat. No. 700-RM000Ä becomes Cat. No. 700-RM000A24. For other coil voltages, contact your local Rockwell Automation sales office or Allen-Bradley distributor.

Type of Relay [V] Coil Volts
24 48 110 115-125 120 220 230-250 240
AC 25 Hz — — C11 — C1 — — C2
50 Hz B24 B48 A1 — — A2 — —
60 Hz A24 A48 — — A1 — — A2
DC — Z24 Z48 — Z1 — — Z2 —
  
‡ Arrangement displays all N.O. contacts.
♣ Location of contacts in 6-pole relays.
∆ Polarity must be observed for DC voltage (700 DC) relays.
♦ Location of contacts in 2-pole relays.

Accessories

Accessories for Bulletin 700-R, -RM Relays

Click to enlarge - 700RRM-232-1 Description Pkg. Quantity Cat. No.
Relay Rail
Simplifies panel layout. These indexed strips are easily cut to the required length and bolted, riveted, or spot-welded in place. Relays are installed adjacent to one another on the mounting strip with the captive mounting screws provided. Rows of relays on Relay Rail form their own wiring trough.
Can be used with the following relays: 700P, 700-PK, 700PH, 700S-P, 700N, 700-R, 700-RTC 		4 Relays per Strip 5 700-MP4
8 Relays per Strip 5 700-MP8
12 Relays per Strip 5 700-MP12
16 Relays per Strip 5 700-MP16
Click to enlarge - 700SA-32-4 DIN (#3) symmetrical hat rail
35 x 7.5 x 1 m 		10 199-DR1
Cat. No. 199-DR1
Click to enlarge - 700_DRA DIN Rail Adapter
Can be used with the following relays:
Bulletin 700P, 700-PK, 700-PH, 700S-P, 700-N, 700-R, 700-RTC 		1 700-DRA
Click to enlarge - 700RRM-232-2 Front Deck
A front deck can be attached to Bulletin 700 2-, 3-, or 4-pole AC and DC Type R or RM relays. 		Front Deck with one N.O. Contact
Cartridge (700-R Relay) 		1 700-RA10
Front Deck with one N.C. Contact
Cartridge (700-R Relay) 		1 700-RA01
Front Deck with one N.O. Contact
Cartridge (700-RM Relay) 		1 700-RB10
Front Deck with one N.C. Contact
Cartridge (700-RM Relay) 		1 700-RB01
Click to enlarge - 700RRM-232-3 Contact Cartridges
These cartridges are used to increase the number of poles of a relay. A dummy cartridge is also available to fill empty space not occupied by a contact cartridge. 		N.O. Contact Cartridge - Green
(700-R Relay) 		1 700-CR5
N.C. Contact Cartridge - Yellow
(700-R Relay) 		1 700-CR6
Click to enlarge - 700RRM-232-4 N.O. Contact Cartridge - Blue
(700-RM Relay) 		1 700-CR7
N.C. Contact Cartridge - Red
(700-RM Relay) 		1 700-CR8
Cat. No.
700-CR5 		Cat. No.
700-CR6 		Cat. No.
700-CR9 		“DUMMY” Cartridge - Black
(700-R and -RM Relays) 		1 700-CR9
Click to enlarge - Relays_Timers-21-7 Surge Suppressor
When the circuit to a DC operating coil is opened, the inductive energy stored in the coil can generate very high transient voltages. With the addition of the appropriate surge suppressor, the stored energy is absorbed and dissipated limiting the voltage spikes. A surge suppressor is not required with AC 700-R or -RM relays because the AC operating coil transients are suppressed by a full wave rectifier connected to the coil. 		12V DC (700-R Relay) 1 199-FSMA9
12V DC (700-RM Relay) 2
24V DC (700-R Relay) 1
24V DC (700-RM Relay) 2
48V DC (700-R Relay) 1
48V DC (700-RM Relay) 2
115…125V DC (700-R Relay) 1 199-FSMA10
115…125V DC (700-RM Relay) 2
230…250V DC (700-R Relay) 1 199-FSMA11
230…250V DC (700-RM Relay) 2
Click to enlarge - 700RRM-232-6 Bulletin 700-PS Solid-State Timing Unit
You can attach a Bulletin 700-PS solid-state timing unit to 4-pole 700-R or -RM relays. An adaptor kit, Cat. No. 700-N26, is required. See Accessories for description.
Bulletin 852S Solid-State Timing Unit
You can attach a Bulletin 852S solid-state timing unit to 4-pole 700-R or -RM relays.
  

Specifications

Application Data – Because of the inherent characteristics of this device, the normally open contacts may close before the normally closed contacts open on energization and the normally closed contacts may close before the normally open contacts open on de-energization.

Note:  For Bul. 700-RM, energizing both the latch and unlatch coil together will cause the relay to be energized and both latch and unlatch coils can be operated together continuously.

Ratings

AC Voltage DC Voltage
NEMA Rating
Designation 		Voltage Make Break Continuous Carrying Current [A] NEMA Rating
Designation 		Volts DC Make/Break Continuous Carrying
Current [A]
B300 Up to 300V AC 120V 30 3 5 NEMA P300 46…300 138 VA 5
240V 15 1.5
C600 Above 300V AC 480V 7.5 0.75 2.5 5…46 3 A 5
600V 6.0 0.60
  

Maximum Allowable Off-State Leakage Current

Voltage Maximum Off-State Leakage
Current [mA] 		Maximum Off-State Leakage
Current [mA]
Type R Type RM
24V DC 23 8
24V AC 23 8
120V AC 5 2
  

Relay Data

Type 700-R 700-RM
Contact Arrangement Up to 8 poles, available in any combination of N.O. or N.C. contacts Up to 8 poles, available in any combination of N.O. or N.C. contacts
Contact Material W (tungsten in a controlled gas atmosphere) W (tungsten in a controlled gas atmosphere)
Coil Voltage Range 24…250V AC
24…250V DC 		24…250V AC
24…250V DC
Coil
Power 		Sealed
Voltage Range: –15… +10% 		5.5 VA, 50/60 Hz
5.5 W DC 		1.7 VA, 50/60 Hz (latch or unlatch)
1.7 W DC
Inrush 5.5 VA, 50/60 Hz
5.5 W DC 		1.7 VA, 50/60 Hz (latch or unlatch)
1.7 W DC
Pickup Time 30 ms 75 ms min. latch pulse
Dropout Time 30 ms 75 ms min. unlatch pulse
Operating Temperature –40…+60 °C (–40…+140 °F) –40…+60 °C (–40…+140 °F)
Mounting Panel mount Panel mount
  

Bulletin 700-R Operating Coils

Click to enlarge - 700RRM-233-1 Coil Volts Bulletin 700-R 2-…8-Pole AC Bulletin 700-R
2-…8-Pole DC
60 Hz 50 Hz
24 77AB27 77AB27 77D152
48 77AB134 77AB134 77D166
110 77AB86 77AB86 —
115…125 — — 77D155
120 77AB86 77AB86 —
208 — — —
220 77AB83 77AB83 —
240 77AB83 77AB83 —
Bulletin 700-R Operating Coil 230…250 — — 77D156
  

Approximate Dimensions

Dimensions are shown in millimeters (inches) shown. Dimensions are not intended to be used for manufacturing purposes.

Click to enlarge - 700RRM-234-1A
Bulletin 700-R400…, -RM400…


Click to enlarge - 700RRM-234-1B
Bulletin 700-R800, -RM800…


Click to enlarge - 700RRM-234-1C
Bulletin 700-R with 852s timer


Click to enlarge - 700RRM-234-1D
Bulletin 700-PS Timer Mounted on a 4-Pole Bulletin 700-R RelayApproximate Shipping Weight: 1.25 kg (2.75 lb)


Click to enlarge - 700RRM-234-2
Type 1 Enclosure


Click to enlarge - 700SP-204-4
Relay Rail


Click to enlarge - 700HA-72-2
Cat. No. 199-DR1 DIN Mounting Rail Series B


Secure the mounting strip with 2 screws at each end relay position. Use a minimum of one screw at the 3rd, 5th, 7th, etc., relay positions. Alternate between upper and lower horizontal slots.

Click to enlarge - 700-DRA


Bulletin 700-R, -RM Relays
Type of Relay No. of
Poles 		Open Type
Without Enclosures 		Approx.
Ship Wt.
[kg (lb)] 		Type 1
General Purpose Enclosure 		Approx.
Ship Wt.
[kg (lb)]
Drawing
Number 		A
Wide 		B
High 		C
Deep 		D A
Wide 		B
High 		C
Deep 		D E
R Bulletin 700
and
Bulletin 700DC 		2…4 1 55.56
(2-3/16) 		88.90
(3-1/2) 		92.25
(3-3/8) 		79.38
(3-1/8) 		0.91
(2) 		104.78
(4-1/8) 		185.74
(7-5/16) 		103.19
(4-1/16) 		146.05
(5-3/4) 		85.73
(3-3/8) 		1.81
(4)
5…8 2 55.56
(2-3/16) 		88.90
(3-1/2) 		111.13
(4-3/8) 		79.38
(3-1/8) 		1.02
(2-1/4) 		112.71
(4-7/16) 		228.60
(9) 		120.65
(4-3/4) 		206.38
(8-1/8) 		92.08
(3-5/8) 		2.49
(5)
R with
Bulletin 852S
Timer 		Bulletin 700
and
Bulletin 700DC 		2…4 3 55.56
(2-3/16) 		88.90
(3-1/2) 		165.1
(6-1/2) 		79.38
(3-1/8) 		1.25
(2-3/4) 		— — — — — —
RM Bulletin 700
and
Bulletin 700DC 		2…4 1 55.56
(2-3/16) 		88.90
(3-1/2) 		95.25
(3-3/8) 		79.38
(3-1/8) 		0.91
(2) 		104.78
(4-1/8) 		185.74
(7-5/16) 		103.19
(4-1/16) 		146.05
(5-3/4) 		85.73
(3-3/8) 		1.81
(4)
5…8 2 55.56
(2-3/16) 		89.90
(3-1/2) 		111.13
(4-3/8) 		79.38
(3-1/8) 		1.02
(2-1/4) 		112.71
(4-7/16) 		228.60
(9) 		120.65
(4-3/4) 		206.38
(8-1/8) 		92.08
(3-5/8) 		2.49
(5)
RM with
Bulletin 852S
Timer 		Bulletin 700
and
Bulletin 700DC 		2…4 3 55.56
(2-3/16) 		88.90
(3-1/2) 		165.1
(6-1/2) 		79.38
(3-1/8) 		1.25
(2-3/4) 		— — — — — —