NEMA Heavy-Duty Industrial Relays

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > Industrial Relays and Timers > NEMA Heavy-Duty Industrial Relays > Bulletin 700-R -RM Sealed Switch Relays

Bulletin 700-R -RM Sealed Switch Relays

Accessories

Accessories for Bulletin 700-R, -RM Relays

			Description		Pkg. Quantity	Cat. No.
			Relay Rail Simplifies panel layout. These indexed strips are easily cut to the required length and bolted, riveted, or spot-welded in place. Relays are installed adjacent to one another on the mounting strip with the captive mounting screws provided. Rows of relays on Relay Rail form their own wiring trough. Can be used with the following relays: 700P, 700-PK, 700PH, 700S-P, 700N, 700-R, 700-RTC	4 Relays per Strip	5	700-MP4
				8 Relays per Strip	5	700-MP8
				12 Relays per Strip	5	700-MP12
				16 Relays per Strip	5	700-MP16
			DIN (#3) symmetrical hat rail 35 x 7.5 x 1 m		10	199-DR1
Cat. No. 199-DR1
			DIN Rail Adapter Can be used with the following relays: Bulletin 700P, 700-PK, 700-PH, 700S-P, 700-N, 700-R, 700-RTC		1	700-DRA
			Front Deck A front deck can be attached to Bulletin 700 2-, 3-, or 4-pole AC and DC Type R or RM relays.	Front Deck with one N.O. Contact Cartridge (700-R Relay)	1	700-RA10
				Front Deck with one N.C. Contact Cartridge (700-R Relay)	1	700-RA01
				Front Deck with one N.O. Contact Cartridge (700-RM Relay)	1	700-RB10
				Front Deck with one N.C. Contact Cartridge (700-RM Relay)	1	700-RB01
			Contact Cartridges These cartridges are used to increase the number of poles of a relay. A dummy cartridge is also available to fill empty space not occupied by a contact cartridge.	N.O. Contact Cartridge - Green (700-R Relay)	1	700-CR5
				N.C. Contact Cartridge - Yellow (700-R Relay)	1	700-CR6
				N.O. Contact Cartridge - Blue (700-RM Relay)	1	700-CR7
				N.C. Contact Cartridge - Red (700-RM Relay)	1	700-CR8
Cat. No. 700-CR5	Cat. No. 700-CR6	Cat. No. 700-CR9		“DUMMY” Cartridge - Black (700-R and -RM Relays)	1	700-CR9
			Surge Suppressor When the circuit to a DC operating coil is opened, the inductive energy stored in the coil can generate very high transient voltages. With the addition of the appropriate surge suppressor, the stored energy is absorbed and dissipated limiting the voltage spikes. A surge suppressor is not required with AC 700-R or -RM relays because the AC operating coil transients are suppressed by a full wave rectifier connected to the coil.	12V DC (700-R Relay)	1	199-FSMA9
				12V DC (700-RM Relay)	2
				24V DC (700-R Relay)	1
				24V DC (700-RM Relay)	2
				48V DC (700-R Relay)	1
				48V DC (700-RM Relay)	2
				115…125V DC (700-R Relay)	1	199-FSMA10
				115…125V DC (700-RM Relay)	2
				230…250V DC (700-R Relay)	1	199-FSMA11
				230…250V DC (700-RM Relay)	2
			Bulletin 700-PS Solid-State Timing Unit You can attach a Bulletin 700-PS solid-state timing unit to 4-pole 700-R or -RM relays. An adaptor kit, Cat. No. 700-N26, is required. See Accessories for description.
			Bulletin 852S Solid-State Timing Unit You can attach a Bulletin 852S solid-state timing unit to 4-pole 700-R or -RM relays.