IEC Industrial Relays

Catalogs > Industrial Controls Catalog > Relays, Timers, and Temperature Controllers > Industrial Relays and Timers > IEC Industrial Relays > Bulletin 700-CF Control Relay

Bulletin 700-CF Control Relay

Introduction Standards Compliance Product Selection Assignment of Contacts Accessories Specifications Approximate Dimensions
Approximate Dimensions

Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended for manufacturing purposes.

Mounting Position

Click to enlarge - 700CF-196-1
⋆ May be mounted to 35 mm EN 50 022 DIN Rail.


Click to enlarge - 700CF-196-2


Click to enlarge - 700CF-196-3


AC and DC Control Relays with 12V or 24V DC Electronic Coil

Type a b c c1 c2 Æd d1 d2
700-CF, -CFB,
-CFM
45
(1-25/32)
81
(3-3/16)
80.5
(3-11/64)
75.5
(3-3/32)
6
(1/4)
2 screws
4.5
(3/16)
60
(2-23/64)
35
(1-25/64)
  

DC Control Relays with 110V or 220V DC Electronic Coil

Type a b c c1 c2 Æd d1 d2
700-CF, -CFB,
-CFM
45
(1-25/32)
105
(4-1/8)
80.5
(3-11/64)
75.5
(3-3/32)
6
(1/4)
2 screws
4.5
(3/16)
60
(2-23/64)
35
(1-25/64)
  

DC Control Relays

Type a b c c1 c2 Æd d1 d2
700-CF, -CFB,
-CFM
45
(1-25/32)
81
(3-3/16)
106.5
(4-3/16)
101.5
(4)
6
(1/4)
2 screws
4.5
(3/16)
60
(2-23/64)
35
(1-25/64)
  

Accessories

Relay with AC Control Relay DC Control Relay
mm (inches) mm (inches)
Auxiliary Contact for Front Mounting 2- or 4-pole c/c1 + 39 (c/c1 + 1 – 37/64) c/c1 + 39 c/c1 + 1 – 37/64)
Auxiliary Contact for Side Mounting 1- or 2-pole a + 9 (a + 23/64) a + 9 (a + 23/64)
Pneumatic Timing Module c/c1 + 58 (c/c1 + 2 – 23/64)
Solid-state Timing Module on coil terminal side b + 24 (b + 15/16) b + 24 (b + 15/16)
Mechanical Latching c/c1 + 61 (c/c1 + 2 – 31/64)
DC Interface on coil terminal side b + 9 (b + 23/64)
Surge Suppressor on coil terminal side b + 3 (b + 1/8) b + 3 (b + 1/8)
Labelling with: label sheet +0 (+0) +0 (+0)
marking tag with cover +0 (+0) +0 (+0)
marking tag carrier for System V4/V5 +5.5 (+7/32) +5.5 (+7/32)
marking tag carrier for System Bull. 1492W +5.5 (+7/32) +5.5 (+7/32)