Screw Connection Terminal Blocks

Certifications

Allen-Bradley terminal blocks generally have been designed to meet the requirements of one or more regulatory bodies. Most products have also been tested per additional standards. The following is a listing of some of the regulatory bodies and standards which apply to Allen-Bradley terminal block products. See the particular product description for information on specific certifications and ratings.

(Underwriters Laboratories) — Devices in this catalog with one of these ratings have been tested by Underwriters Laboratories and meet the requirements of one or more of the following United States Standards:

UL 467 — Grounding and Bonding Equipment

UL 486E — Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors

UL 1059 — Standard for Terminal Blocks

Reference UL files E34648, E40735, E160646

(Underwriters Laboratories) — Devices in this catalog with this rating have been tested by Underwriters Laboratories and meet the requirements of the following Canadian Standard:

CSA 22.2 No. 158 — Terminal Blocks

Reference UL file E40735

(Canadian Standards Association) — Devices in this catalog with this rating have been tested by the Canadian Standards Association and meet the requirements of the following Canadian Standard:

CSA 22.2 No. 158 — Terminal Blocks

Reference CSA files LR67896

Terminal blocks listed in this catalog meet the requirements of the Low Voltage Directive put forth by the European Union. Devices have been tested and comply with one or more of the following European Norms:

EN 60947-1 — Low Voltage Switchgear and Controlgear: General Rules

EN 60947-7-1 — Low Voltage Switchgear and Controlgear: Terminal Blocks for Copper Conductors

EN 60947-7-2 — Low Voltage Switchgear and Controlgear: Protective Conductor Terminal Blocks for Copper Conductors

EN 60947-7-3 — Low Voltage Switchgear and Controlgear: Safety Requirements for Fuse Terminal Blocks

ATEX — Devices listed in this catalog with “ATEX” ratings meet the following European Norms per DEMKO or KEMA, Approval Certification Bodies for the European Union:

EN 50014 — Electrical Apparatus for Potentially Explosive Atmospheres — General Requirements

EN 50019 — Electrical Apparatus for Potentially Explosive Atmospheres — Increased Safety “e”

Contact your local Rockwell Automation sales office or Allen-Bradley distributor for a copy of the certificate.

Ex e II — Many 1492-J, 1492-K, 1492-L, and 1492-W terminal blocks in this catalog meet the following Canadian Standards per Underwriters Laboratories:

E79-0-95 — Electrical Apparatus for Explosive Atmospheres — Part 0 — General Requirements

E79-7-95 — Electrical Apparatus for Explosive Atmospheres — Part 7 — Increased Safety “e”

These products are suitable for Class I, Zone 1 Hazardous Locations. Reference UL file E187022. Contact your local Allen-Bradley distributor for more information.

AEx e II — Devices listed in this catalog with an “AEx e II” rating meet the following United States Standard per Underwriters Laboratories:

UL 2279 — Standard for Electrical Equipment for Use in Class I, Zone 0, 1, and 2 Hazardous (Classified) Locations

These products are suitable for Class I, Zone 1 Hazardous Locations. Reference UL file E187022. Contact your local Rockwell Automation sales office or Allen-Bradley distributor for more information.

Lloyd’s Register — Many 1492-H, 1492-J, 1492-L, and 1492-W terminal blocks in this catalog have been certified for use in marine, off-shore, and industrial installations per the following standard:

Lloyd’s Register Test Specification No. 1:1996

Contact your local Rockwell Automation sales office or Allen-Bradley distributor for a copy of the certificate.

The Allen-Bradley Line of IEC Terminal Blocks…
International Products for a Worldwide Marketplace

The Allen-Bradley Bulletin 1492-J line of internationally approved IEC style terminal blocks offers a wide range of features and benefits ideally suited for many industrial applications. The 1492-J line has been designed to meet the tough requirements of almost every industrial application. Functional, internationally approved, finger-safe, and cost-effective — the Allen-Bradley Bulletin 1492-J line.

Products Available in the Bulletin 1492 Screw Terminal Block Line

Our family of IEC terminal blocks consists of many different types of blocks, from general feed-through terminal blocks for control wiring to specialty blocks for grounding and isolating. We even offer thermocouple terminal blocks, specifically designed for temperature-dependent process control applications.

Products offered within the Bulletin 1492 Screw Terminal Block line include:

Feed-Through Blocks, capable of accommodating #30…2/0 AWG (0.2…70 mm²) wire
Grounding Blocks for grounding a given circuit to the DIN Rail
Mini Blocks for applications where panel space is at a premium
Two-Level Blocks that double circuit wiring density
Multi-Conductor Blocks that allow splitting or joining of control circuits
Three-Level Sensor Blocks for coordination of three-wire sensor groups
Isolation Blocks for circuit isolation during testing and troubleshooting
Fuse Blocks, with and without blown fuse indication, for easily integrated overcurrent protection
Electrical Component Blocks that allow the insertion of fixed components into control circuits. Available components include resistors, diodes, surge suppression circuits, and shunt bars.

Tie-Point Block
(Cat. No. 1492-JD3C)

Incorporates a shunt bar between the upper and lower current bars to provide a common point among all four terminals.

Diode Block
(Cat. Nos. 1492-JD3DF, 1492-JD3DR)

Uses a 1N4007 diode between the upper and lower levels for insertion into a control circuit. This block is useful in low voltage DC control circuits for directioning and suppression.

Cat. No. 1492-JD3DF

Cat. No. 1492-JD3DR

Surge Suppression Block
(Cat. Nos. 1492-JD3SS)

Provides a convenient means of incorporating transient suppression for relays, contactors, and solenoids into a control system.

Resistor Block
(Cat. No. 1492-JD3RC001)

Permits the introduction of a 249 W resistor into a control circuit.

Return Blocks that have both terminations on the same side of the terminal block allowing the rail to be mounted next to the wall of an enclosure
Plug-In Style Blocks that allow the insertion of removable plugs into control circuits. Available plugs include a Disconnect Plug, a Fuse Plug, and a Component Plug which will accommodate various electrical components
Thermocouple Terminal Blocks (Types B, E, J, K, N, S, T) for temperature control applications
A wide variety of Snap-In Markers for individual or group circuit identification
Multi-pole insulated Center Jumpers which provide a convenient method of commoning control circuits

Materials and Design Features

The Bulletin 1492-J line is designed for safety, installation ease, and ruggedness. Features using these design criteria include the following:

Tin-plated terminals and steel screws for corrosion resistance (Bulletin 1492-W terminal blocks have nickel-plated terminals and stainless steel screws)
High copper content copper alloy for excellent conductivity
Four-sided wire funnel guides for easy wire insertion
Finger-safe housings to prevent accidental contact with live circuits
International approvals for worldwide use
DIN Rail (Cat. No. 199-DR1) mountability, allowing terminal blocks to be placed on the same channel as contactors, starters, relays, and other DIN Rail-mounted control devices
Self-extinguishing, polyamide 6.6 housing material with UL 94-V0 flammability rating (Bulletin 1492-W terminal blocks have UL 94-V2 flammability rating)
Backed out screws for fast wiring

Mini-Blocks

1492-WM3

1492-WM4

1492-WMD1

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Single-circuit mini terminal block.

Two-circuit mini terminal block.

Certifications

IEC

CSA

ATEX

IEC

CSA

ATEX

CSA

IEC

Voltage Rating

300V AC/DC

500V AC/DC

300V AC/DC

420V AC/DC

300V AC/DC

500V AC/DC

300V AC/DC

420V AC/DC

300V AC/DC

500V AC/DC

Maximum Current

15 A

24 A

15 A

24 A

20 A

32 A

20 A

32 A

15 A

17.5 A

Wire Range (Rated Cross Section)

#30…14 AWG

0.5…2.5 mm²

#22…14 AWG

2.5 mm²

#22…12 AWG

0.5…4.0 mm²

#22…12 AWG

4.0 mm²

#22…16 AWG

0.5…1.5 mm²

Wire Strip Length

0.24 in. (6 mm)

0.39 in. (10 mm)

0.35 in (9 mm)

Recommended Tightening Torque

4.2…4.6 lb•in. (0.5 N•m)

5.0…5.6 lb•in. (0.6 N•m)

4.2…4.6 lb•in (0.5 N•m)

Density

61 pcs/ft (200/m)

50 pcs/ft (166/m)

61 pcs/ft (200/m)

Housing Temperature Range

–40…+195 °F (–40…+90 °C)

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Grey

1492-WM3

1492-WM4

1492-WMD1

Red

1492-WM3-RE

1492-WM4-RE

1492-WMD1-RE

Blue

1492-WM3-B

1492-WM4-B

1492-WMD1-B

Black

1492-WM3-BL

1492-WM4-BL

1492-WMD1-BL

Green

1492-WM3-G

1492-WM4-G

1492-WMD1-G

Yellow

1492-WM3-Y

1492-WM4-Y

1492-WMD1-Y

Orange

1492-WM3-OR

1492-WM4-OR

1492-WMD1-OR

Brown

1492-WM3-BR

1492-WM4-BR

1492-WMD1-BR

White

1492-WM3-W

1492-WM4-W

1492-WMD1-W

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Sym. mini DIN (Steel)

1492-DR3

End Barrier

1492-EBM3

1492-EBM4

1492-EBMD1

End Anchors and Retainers:
Mini Screwless End Retainer

1492-ERL15

Mini DIN Anchor — Normal Duty

1492-EAJ15

Jumpers:
Insulated Side Jumper

1492-SJM5-10 (10-pole)

1492-N42 (2-pole)

—

1492-SJ6-10 (10-pole)

Side Jumper — 12-pole uninsulated

—

1492-SJMD5-12 (Uninsulated)

Center Jumper — 50-pole

—

1492-CJD6-50

—

Center Jumper — 10-pole

1492-CJM5-10

1492-CJD6-10

—

Center Jumper — 5-pole

—

1492-CJD6-5

—

Center Jumper — 4-pole

—

1492-CJD6-4

—

Center Jumper — 3-pole

1492-CJM5-3

1492-CJD6-3

—

Center Jumper — 2-pole

1492-CJM5-2

1492-CJD6-2

—

Center Jumper Link

1492-CJL5

1492-CJL6

—

Other Accessories:
Partition Plate

1492-PPM3

1492-PPMD1

Test Plug

—

1492-TP28

—

Test Plug Adapter

1492-TA285

1492-TA40

—

Electrical Warning Plate (4-pole)

—

1492-EWP6-4

—

Marking Systems:
Snap-in Marker Card

1492-MS5X5 (80/card)

1492-MS6X9 (80/card)

1492-MS5X5 (80/card)

		1492-WMG3		1492-WMG4
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Single-circuit mini grounding terminal block.		Single-circuit mini grounding terminal block.
Certifications		IEC			IEC
Maximum Current		Grounding		Grounding
Wire Range (Rated Cross Section)		#14 AWG (2.5 mm²)		#22…12 AWG	0.5…4.0 mm²
Wire Strip Length		0.31 in. (8 mm)		0.39 in. (10 mm)
Recommended Tightening Torque		6.2 lb•in. (0.7 N•m)		5.3 lb•in. (0.6 N•m)
Density		50 pcs/ft (166 pcs/m)		50 pcs/ft (166 pcs/m)
Housing Temperature Range		—		–40…+195 °F (–40…+90 °C)
Terminal Blocks		Cat. No.	Pkg Qty.	Cat. No.	Pkg Qty.
Color:	Metallic	1492-WMG3	50	—	—
	Green/Yellow	—	—	1492-WMG4	10
Accessories		Cat. No.	Pkg Qty.	Cat. No.	Pkg Qty.
Mounting Rails: 1 m Sym. Mini DIN (Steel)		1492-DR3	5	1492-DR3	5
End Anchors and Retainers: Mini Screwless End Retainer		—	—	1492-ERL15	20
Mini DIN Anchor — Normal Duty		—	—	1492-EAJ15	50
Other Accessories: Partition Plate		1492-PPM3	50	1492-PPM3	50
Marking Systems: Snap-in Marker Card		—	—	1492-MS6X9 (80/card)	5

Standard Feed-Through Blocks

1492-J3

1492-J4

1492-J6

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Feed-through terminal block

Certifications

CSA

IEC

ATEX

CSA

IEC

ATEX

CSA

IEC

ATEX

Voltage Rating

600V AC/DC

800V AC/DC

550V AC/DC

600V AC/DC

800V AC/DC

690V AC/DC

600V AC/DC

800V AC/DC

550V AC/DC

Maximum Current

25 A

20 A

24 A

21 A

35 A

25 A

32 A

28 A

50 A

41 A

36 A

Wire Range (Rated Cross Section)

#22…12 AWG

#26…12 AWG

2.5 mm²

2.5 mm² (#20…14 AWG)

#22…10 AWG

#26…10 AWG

4 mm²

4 mm² (#20…12 AWG)

#22…8 AWG

6 mm²

6 mm² (#20…10 AWG)

Wire Strip Length

0.39 in. (10 mm)

0.47 in (12 mm)

Recommended Tightening Torque

4.5…7.1 lb•in. (0.5…0.8 N•m)

9.0 lb•in. (1.0 N•m)

14.2 lb•in (1.6 N•m)

Density

59 pcs/ft (196 pcs/m)

49 pcs/ft (163 pcs/m)

37 pcs/ft (123 pcs/m)

Housing Temperature Range

–58…+248 °F (–50…+120 °C)

Short-Circuit Current Rating

See Fuse Ratings

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Grey

1492-J3

100

1492-J4

100

1492-J6

100

Red

1492-J3-RE

100

1492-J4-RE

100

1492-J6-RE

100

Blue

1492-J3-B

100

1492-J4-B

100

1492-J6-B

100

Black

1492-J3-BL

100

1492-J4-BL

100

1492-J6-BL

100

Green

1492-J3-G

100

1492-J4-G

100

1492-J6-G

100

Yellow

1492-J3-Y

100

1492-J4-Y

100

1492-J6-Y

100

Orange

1492-J3-OR

100

1492-J4-OR

100

1492-J6-OR

100

Brown

1492-J3-BR

100

1492-J4-BR

100

1492-J6-BR

100

White

1492-J3-W

100

1492-J4-W

100

1492-J6-W

100

Violet

1492-J3-V

100

1492-J4-V

100

—

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

1 m Symmetrical DIN (Aluminum)

1492-DR5

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

End Barriers

Grey

1492-EBJ3

Blue

1492-EBJ3-B

Yellow

1492-EBJ3-Y

End Anchors and Retainers:
Screwless End Retainer

1492-ERL35

DIN Rail — Normal Duty

1492-EAJ35

100

1492-EAJ35

100

1492-EAJ35

100

DIN Rail — Heavy Duty

1492-EAHJ35

Jumpers:¬
Screw Center Jumper — 10-pole

1492-CJJ5-10

1492-CJJ6-10

1492-CJJ8-10

Screw Center Jumper — 4-pole

1492-CJJ5-4

1492-CJJ6-4

1492-CJJ8-4

Screw Center Jumper — 3-pole

1492-CJJ5-3

1492-CJJ6-3

1492-CJJ8-3

Screw Center Jumper — 2-pole

1492-CJJ5-2

1492-CJJ6-2

1492-CJJ8-2

Plug-in Center Jumper — 50-Pole

1492-CJLJ5-50

1492-CJLJ6-41 (41-pole)

—

Plug-in Center Jumper — 10-Pole

1492-CJLJ5-10

1492-CJLJ6-10

—

Plug-in Center Jumper — 9-Pole

1492-CJLJ5-9

—

Plug-in Center Jumper — 8-Pole

1492-CJLJ5-8

—

Plug-in Center Jumper — 7-Pole

1492-CJLJ5-7

—

Plug-in Center Jumper — 6-Pole

1492-CJLJ5-6

—

Plug-in Center Jumper — 5-Pole

1492-CJLJ5-5

—

Plug-in Center Jumper — 4-Pole

1492-CJLJ5-4

1492-CJLJ6-4

—

Plug-in Center Jumper — 3-Pole

1492-CJLJ5-3

1492-CJLJ6-3

—

Plug-in Center Jumper — 2-Pole

1492-CJLJ5-2

1492-CJLJ6-2

—

Insulated Side Jumper — 24-Pole

1492-SJ5B-24

—

Insulated Side Jumper — 10-Pole

1492-SJ5B-10

—

Screw Type Jumper Notching Tool

1492-T1

Other Accessories:
Partition Plate

1492-EBJ16

Test Plug Socket

1492-TPS23

1492-TPS23L

Test Plug

1492-TP23

Test Plug (Stackable)

1492-TPJ5

1492-TPJ6

—

Electrical Warning Plate

1492-EWPJ5

1492-EWPJ8

Marking Systems:
Snap-in Marker Cards

1492-M5X12 (144/card)

1492-M6X12 (120/card)

1492-MR8X12 (84/card)

1492-M5X5 (200/card)

1492-M6X5 (200/card)

1492-M8X5 (160/card)

¬ Use of center jumpers may affect spacings, requiring derating of terminal blocks. See Jumpers for details.

1492-J10

1492-J16

1492-J35

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Feed-through terminal block

Certifications

CSA

IEC

ATEX

CSA

IEC

ATEX

CSA

IEC

ATEX

Voltage Rating

600V AC/DC

1000V AC/DC

550V AC/DC

600V AC/DC

1000V AC/DC

690V AC/DC

1000V AC/DC

600V AC/DC

1000V AC/DC

690V AC/DC

Maximum Current

65 A

50 A

57 A

50 A

85 A

76 A

66 A

150 A

120 A

125 A

109 A

Wire Range (Rated Cross Section)

#18…6 AWG

10 mm²

10 mm² (#16…8 AWG)

#18…6 AWG

#18…4 AWG

16 mm²

16 mm² (#16…6 AWG)

#12…1/0 AWG

#12…2 AWG

35 mm²

35 mm² (#14…2 AWG)

Wire Strip Length

0.47 in. (12 mm)

0.63 in. (16 mm)

0.70 in (18 mm)

Recommended Tightening Torque

20.4 lb•in. (2.3 N•m)

35.0 lb•in. (4.0 N•m)

51.0 lb•in (5.8 N•m)

Density

30 pcs/ft (100 pcs/m)

25 pcs/ft (83 pcs/m)

19 pcs/ft (62 pcs/m)

Housing Temperature Range

–58…+248 °F (–50…+120 °C)

Short-Circuit Current Rating

See Fuse Ratings

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Grey

1492-J10

1492-J16

1492-J35

Red

1492-J10-RE

1492-J16-RE

—

Blue

1492-J10-B

1492-J16-B

1492-J35-B

Black

1492-J10-BL

1492-J16-BL

—

Green

1492-J10-G

1492-J16-G

—

Yellow

1492-J10-Y

1492-J16-Y

1492-J35-Y

Orange

1492-J10-OR

1492-J16-OR

—

Brown

1492-J10-BR

1492-J16-BR

—

White

1492-J10-W

1492-J16-W

—

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

1 m Symmetrical Heavy Duty DIN (Steel, unslotted)

199-DR4

1 m Symmetrical DIN (Aluminum)

1492-DR5

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

1 m Symmetrical Heavy Duty DIN (Copper, unslotted)

1492-DR8

1 m Symmetrical Heavy Duty DIN (Steel)

1492-DR9

End Barriers

Grey

1492-EBJ3

1492-EBJ16

Blue

1492-EBJ3-B

1492-EBJ16-B

Yellow

1492-EBJ3-Y

1492-EBJ16-Y

End Anchors and Retainers:
Screwless End Retainer

1492-ERL35

—

DIN Rail — Normal Duty

1492-EAJ35

100

—

DIN Rail — Heavy Duty

1492-EAHJ35

Jumpers:
Screw Center Jumper — 10-pole

1492-CJJ10-10

1492-CJJ12-10

1492-CJJ16-10

Screw Center Jumper — 4-pole

1492-CJJ10-4

1492-CJJ12-4

1492-CJJ16-4

Screw Center Jumper — 3-pole

1492-CJJ10-3

1492-CJJ12-3

1492-CJJ16-3

Screw Center Jumper — 2-pole

1492-CJJ10-2

1492-CJJ12-2

1492-CJJ16-2

Screw Type Jumper Notching Tool

1492-T1

Other Accessories:
Partition Plate

1492-EBJ16

1492-PPJD3

Test Plug Socket

1492-TPS23L

1492-TPS4L

Test Plug

1492-TP23

1492-TP40

Electrical Warning Plate

1492-EWPJ8

1492-EWPJ12

Marking Systems:
Snap-in marker cards

1492-M7X12 (108/card)

Snap-in marker cards

1492-M5X5 (200/card)

1492-M5X5 (200 card)

1492-M5X5 (200/card)

1492-J50

1492-J70

1492-J120

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Click to enlarge - 1492-J120-c_cmyk_dims

Specifications

Feed-through terminal block

Certifications

CSA

IEC

ATEX

CSA

IEC

ATEX

CSA

IEC

Voltage Rating

1000V
AC/DC

600V AC/DC

1000V AC/DC

690V AC/DC

600V AC/DC

1000V AC/DC

690V AC/DC

1000V
AC/DC

Maximum Current

150 A

126 A

175 A

205 A

192 A

167 A

228 A

220 A

269 A

Wire Range (Rated Cross Section)

#10…1/0 AWG

#8…1/0 AWG

50 mm²

#10…1/0 AWG
50 mm²

#6…2/0 AWG

70 mm²

#8…2/0 AWG
70 mm²

#4…250 MCM AWG

#4…4/0 AWG

16…120 mm²

Wire Strip Length

0.94 in. (24 mm)

0.87 in. (22 mm)

1.06 in. (27 mm)

Recommended Tightening Torque

31.5 lb•in. (3.6 N•m)

87.0 lb•in. (9.8 N•m)

141.6 lb•in. (16.0 N•m)

Density

16 pcs/ft (54 pcs/m)

14 pcs/ft (48 pcs/m)

11 pcs/ft (37 pcs/m)

Housing Temperature Range

–58…+248 °F (–50…+120 °C)

-58...+248 °F (-50...+120 °C)

Short-Circuit Current Rating

See Fuse Ratings

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Grey

1492-J50

1492-J70

1492-J120

Blue

1492-J50-B

1492-J120-B

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

—

1 m Symmetrical Heavy Duty DIN (Steel, Unslotted)

199-DR4

1 m Symmetrical DIN (Aluminum)

1492-DR5

—

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

Not Required

—

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

1492-EAHJ35

1 m Symmetrical Heavy Duty DIN (Copper, Unslotted)

1492-DR8

1 m Symmetrical Heavy Duty DIN (Steel)

1492-DR9

End Barriers

Not Required

—

Not Required

—

1492-CJJ27-4

End Anchors:
DIN Rail — Heavy Duty

1492-EAHJ35

—

Jumpers:

Screw Center Jumper — 4-pole

1492-CJJ18-4

1492-CJJ20-4

1492-CJJ27-4

Screw Center Jumper — 3-pole

1492-CJJ18-3

1492-CJJ20-3

1492-CJJ27-3

Screw Center Jumper — 2-pole

1492-CJJ18-2

1492-CJJ20-2

1492-CJJ27-2

Other Accessories:
Control Circuit Tap¬

1492-J50A

1492-J70A

1492-J120A

Electrical Warning Plate

1492-EWPJ18

—

Marking Systems:
Snap-in marker cards

1492-M7X12 (108/card)

1492-MR8X12 (84/card)

Snap-in marker cards

1492-M5X5 (200/card)

1492-M7X12 (108/card)

¬ Auxiliary connection, allowing a single additional 4 mm² (12 AWG) wire connection.

Space-Saver Feed-Through Blocks

1492-W3

1492-W4

1492-W6

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Single-circuit terminal block.

Certifications

IEC

CSA

ATEX

IEC

CSA

ATEX

IEC

CSA

ATEX

Voltage Rating

600V AC/DC

800V AC/DC

600V AC/DC

550V AC/DC

600V AC/DC

800V AC/DC

600V AC/DC

550V AC/DC

600V AC/DC

800V AC/DC

600V AC/DC

550V AC/DC

Maximum Current

20 A

24 A

20 A

24 A

30 A

32 A

30 A

32 A

40 A

41 A

40 A

41 A

Wire Range (Rated Cross Section)

#30…14 AWG

0.5…2.5 mm²

#22…14 AWG

2.5 mm²

#22…10 AWG

0.5…4.0 mm²

#22…10 AWG

4.0 mm²

#22…10 AWG

0.5…6.0 mm²

#22…10 AWG

6.0 mm²

Wire Strip Length

0.39 in. (10 mm)

0.35 in. (9 mm)

0.47 in (12 mm)

Recommended Tightening Torque

5.0…5.6 lb•in. (0.6 N•m)

5.6…6.8 lb•in (0.7 N•m)

Density

61 pcs/ft (200 pcs/m)

50 pcs/ft (166 pcs/m)

43 pcs/ft (142 pcs/m)

Housing Temperature Range

–40…+195 °F (–40…+90 °C)

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Grey

1492-W3

1492-W4

1492-W6

Red

1492-W3-RE

1492-W4-RE

1492-W6-RE

Blue

1492-W3-B

1492-W4-B

1492-W6-B

Black

1492-W3-BL

1492-W4-BL

1492-W6-BL

Green

1492-W3-G

1492-W4-G

1492-W6-G

Yellow

1492-W3-Y

1492-W4-Y

1492-W6-Y

Orange

1492-W3-OR

1492-W4-OR

1492-W6-OR

Brown

1492-W3-BR

1492-W4-BR

1492-W6-BR

White

1492-W3-W

1492-W4-W

1492-W6-W

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

1 m Symmetrical DIN (Aluminum)

1492-DR5

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

End Barrier

1492-EB3

1492-EB10

End Anchors and Retainers:
Screwless End Retainer

1492-ERL35

DIN Rail — Normal Duty

1492-EAJ35

100

1492-EAJ35

100

1492-EAJ35

100

DIN Rail — Heavy Duty

1492-EAHJ35

Jumpers:
Insulated Side Jumper

1492-SJ5-10 (10-pole)

1492-N42 (2-pole)

—

1492-SJ6-10 (10-pole)

Center Jumper — 50-pole

1492-CJ5-50

1492-CJ6-50

—

Center Jumper — 40-pole

—

1492-CJ7-40

Center Jumper — 10-pole

1492-CJ5-10

1492-CJ6-10

1492-CJ7-10

Center Jumper — 5-pole

1492-CJ5-5

1492-CJ6-5

1492-CJ7-5

Center Jumper — 4-pole

1492-CJ5-4

1492-CJ6-4

1492-CJ7-4

Center Jumper — 3-pole

1492-CJ5-3

1492-CJ6-3

1492-CJ7-3

Center Jumper — 2-pole

1492-CJ5-2

1492-CJ6-2

1492-CJ7-2

Center Jumper Link

1492-CJL5

1492-CJL6

1492-CJL7

Center Jumper Cover — White¬

1492-CJCW5

1492-CJCW6

Other Accessories:
Partition Plate

1492-PP3

1492-PP10

Separation Plate

1492-SP3

—

Test Plug

—

1492-TP28

Stackable Test Plug (with Legs)

—

1492-TP6EWL

—

Stackable Test Plug (without Legs)

—

1492-TP6E

—

Test Plug Adapter

1492-TA285

1492-TA40

Electrical Warning Plate (1-pole)

1492-EWP5

1492-EWP6

1492-EWP7

Electrical Warning Plate (4-pole)

1492-EWP5-4

1492-EWP6-4

1492-EWP7-4

Marking Systems:
Snap-in Marker Cards

1492-MS5X12 (80/card)

1492-MS6X12 (80/card)

¬ May only be used as a marking surface. Cannot be installed over a center jumper.

		1492-W10				1492-W16S
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Single-circuit terminal block.				Single-circuit terminal block.
Certifications			IEC	CSA	ATEX		IEC	CSA	ATEX
Voltage Rating		600V AC/DC	800V AC/DC	600V AC/DC	550V AC/DC	600V AC/DC	800V AC/DC	600V AC/DC	550V AC/DC
Maximum Current		50 A	57 A	50 A	50 A	85 A	76 A	85 A	96 A
Wire Range (Rated Cross Section)		#22…8 AWG	10 mm²	#22…8 AWG	0.5…10 mm²	#14…4 AWG	16 mm²	#14…4 AWG	2.5…16 mm²
Wire Strip Length		0.51 in. (13 mm)				0.51 in. (13 mm)
Recommended Tightening Torque		12.2…13.4 lb•in. (1.4 N•m)				18…20 lb•in. (2.1 N•m)
Density		38 pcs/ft (125 pcs/m)				27 pcs/ft (90 pcs/m)
Housing Temperature Range		–40…+195 °F (–40…+90 °C)				–40…+195 °F (–40…+90 °C)
Terminal Blocks		Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.
Color:	Grey	1492-W10			50	1492-W16S			50
	Red	1492-W10-RE			50	1492-W16S-RE			50
	Blue	1492-W10-B			50	1492-W16S-B			50
	Black	1492-W10-BL			50	1492-W16S-BL			50
	Green	1492-W10-G			50	1492-W16S-G			50
	Yellow	1492-W10-Y			50	1492-W16S-Y			50
	Orange	1492-W10-OR			50	1492-W16S-OR			50
	Brown	1492-W10-BR			50	1492-W16S-BR			50
	White	1492-W10-W			50	1492-W16S-W			50
Accessories		Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1			10	199-DR1			10
1 m Symmetrical DIN (Aluminum)		1492-DR5			10	1492-DR5			10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6			2	1492-DR6			2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7			2	1492-DR7			2
End Barrier		1492-EB10			50	1492-EB10			50
End Anchors: DIN Rail — Normal Duty		1492-EAJ35			100	1492-EAJ35			100
DIN Rail — Heavy Duty		1492-EAHJ35			50	1492-EAHJ35			50
Jumpers: Side Jumper — 10-pole insulated		1492-SJ8-10			10	—			—
Center Jumper — 40-pole		1492-CJ8-40			5	—			—
Center Jumper — 10-pole		1492-CJ8-10			10	1492-CJS11-10			10
Center Jumper — 5-pole		1492-CJ8-5			10	1492-CJS11-5			10
Center Jumper — 4-pole		1492-CJ8-4			10	1492-CJS11-4			10
Center Jumper — 3-pole		1492-CJ8-3			10	1492-CJS11-3			10
Center Jumper — 2-pole		1492-CJ8-2			10	1492-CJS11-2			10
Center Jumper Link		1492-CJL8			10	—			—
Center Jumper Cover — White		1492-CJCW6			20	—			—
Other Accessories: Partition Plate		1492-PP10			50	1492-PP10			50
Test Plug		1492-TP28			10	—			—
Test Plug Adapter		1492-TA40			10	1492-TA40L			10
Electrical Warning Plate (1-pole)		1492-EWP8			10	1492-EWP11			10
Electrical Warning Plate (4-pole)		1492-EWP8-4			10	1492-EWP11-4			10
Marking Systems: Snap-in Marker Card		1492-MS8X12 (56/card)			5	1492-MS6X12 (80/card)			5

Multi-Circuit Feed-Through Blocks

		1492-JD3				1492-JD4				1492-JT3M
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Two-level, two-circuit feed-through terminal block				Two-level, two-circuit feed-through terminal block				Three-level, three-circuit terminal block with ground point
Certifications			CSA	IEC	ATEX		CSA	IEC	ATEX		CSA	IEC
Voltage Rating		600V AC/DC	300V AC/DC	400V AC/DC	275V AC/DC	600V AC/DC	300V AC/DC	800V AC/DC	550V AC/DC	300V AC/DC		400V AC/DC
Maximum Current		20 A	10 A	24 A	21 A	35 A	30 A	32 A	28 A	10 A		24 A
Wire Range (Rated Cross Section)		#22…12 AWG	26…12 AWG	2.5 mm²	2.5 mm² (20… 14 AWG)	#26…10 AWG		0.5…4 mm²	4 mm²(20…12 AWG)	#22…12 AWG	#26…10 AWG	0.5…2.5 mm²
Wire Strip Length		0.39 in. (10 mm)				0.315 in. (8 mm)				0.28 in. (7 mm)
Recommended Tightening Torque		4.5…7.1 lb•in. (0.5…0.8 N•m)				4.5 lb•in. (0.5 N•m)				4.4 lb•in. (0.5 N•m)
Density		59 pcs/ft (196 pcs/m)				49 pcs/ft (163 pcs/m)				49 pcs/ft (163 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Grey	1492-JD3			100	1492-JD4			100	1492-JT3M		50
	Red	1492-JD3-RE			100	1492-JD4-RE			100	—		—
	Blue	1492-JD3-B			100	1492-JD4-B			100	—		—
	Black	1492-JD3-BL			100	1492-JD4-BL			100	—		—
	Green	1492-JD3-G			100	1492-JD4-G			100	—		—
	Yellow	1492-JD3-Y			100	1492-JD4-Y			100	—		—
	Orange	1492-JD3-OR			100	1492-JD4-OR			100	—		—
	Brown	1492-JD3-BR			100	1492-JD4-BR			100	—		—
	White	1492-JD3-W			100	1492-JD4-W			100	—		—
Accessories		Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1			10	199-DR1			10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5			10	1492-DR5			10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6			2	1492-DR6			2	1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7			2	1492-DR7			2	1492-DR7		2
End Barrier	Grey	1492-EBJD3			20	1492-EBJD4			20	1492-EBJ3TM		20
	Blue	1492-EBJD3-B			20	1492-EBJD4-B			20	—		—
	Yellow	1492-EBJD3-Y			20	—			—	—		—
End Anchor and Retainers: Screwless End Retainer		1492-ERL35			20	—			—	—		—
DIN Rail — Normal Duty		1492-EAJ35			100	—			—	—		—
DIN Rail — Heavy Duty		1492-EAHJ35			50	1492-EAHJ35			50	1492-EAHJ35		50
Jumpers: Center Jumper — 41-pole		—			—	‡	1492-CJLJ6-41		10	—		—
Center Jumper — 10-pole		T	1492-CJJ5-10		20	‡	1492-CJLJ6-10		20	—		—
Center Jumper — 4-pole		T	1492-CJJ5-4		50	‡	1492-CJLJ6-4		60	—		—
Center Jumper — 3-pole		T	1492-CJJ5-3		50	‡	1492-CJLJ6-3		60	—		—
Center Jumper — 2-pole		T	1492-CJJ5-2		50	‡	1492-CJLJ6-2		60	—		—
Insulated Side Jumper — 50-Pole		—			—	—			—	1492-SJ6A-50		5
Insulated Side Jumper — 24-Pole		1492-SJ5A-24			50	—			—	—		—
Insulated Side Jumper — 10-Pole		1492-SJ5A-10			50	—			—	—		—
Screw Type Jumper Notching Tool		1492-T1			1	—			—	—		—
Other Accessories: Partition Plate		1492-PPJD3			20	1492-PPJD3			20	1492-PPJD3		20
Test Plug Socket		1492-TPS23			20	—			—	—		—
Test Plug		1492-TP23			20	—			—	—		—
Snap-in marker cards		1492-M5X5 (200/card)			5	1492-M6X5 (200/card)			5	1492-M6X5 (200/card)		5

T Screw Center Jumpers, ‡ Plug-in Center Jumpers

Specialty Feed-Through Blocks

		1492-J2Q			1492-J3TW				1492-J4TW
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through terminal block with 2 connection points on each side			Feed-through terminal block with 3 connection points, 2 on one side				Feed-through terminal block with 3 connection points, 2 on one side
Certifications			CSA	IEC		CSA	IEC	ATEX		CSA	IEC
Voltage Rating		300V AC/DC		800V AC/DC	300V AC/DC		800V AC/DC	550V AC/DC	600V AC/DC		500V AC/DC
Maximum Current	Single Side	25 A	10 A	17.5 A	—				—
	Twin Side	—			20 A		24 A	21 A	20 A	20 A	21 A
Maximum Current (Rated Cross Section) (Twin Side)	Single Side	—			10 A	15 A	17.5 A	15 A	10 A	15 A	15 A
Wire Range (Rated Cross Section)	Twin Side	#22…12 AWG	#26…12 AWG	1.5 mm²	#22…12 AWG	26…12 AWG	2.5 mm²	2.5 mm² (#20…14 AWG)	#30…10 AWG	30…10 AWG	2.5 mm²
	Wire Range (Rated Cross Section)	—			#22…14 AWG	26…14 AWG	1.5 mm²	1.5 mm² (#20…16 AWG)	#22…14 AWG	26…14 AWG	1.5 mm²
Wire Strip Length/Tightening Torque	Wire Strip Length	0.28 in. (7 mm)			Single Side: 0.39 in. (10 mm)/7.0 lb-in. (0.8 N•m)				Single Side: 0.39 in. (10 mm)/7.0 lb-in. (0.8 N•m)
Wire Strip Length	Wire Strip Length				Twin Side: 0.26 in. (7 mm)/4.5 lb-in. (0.5 N•m)				Twin Side: 0.26 in. (7 mm)/4.5 lb-in. (0.5 N•m)
Recommended Tightening Torque	Wire Strip Length	4.5 lb•in. (0.5 N•m)			—				6.2 lb•in. (0.7 N•m)
Density		59 pcs/ft (196 pcs/m)			59 pcs/ft (196 pcs/m)				59 pcs/ft (196 pcs/m)
Housing Temperature Range	Insulation Temperature Range	–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks	Terminal Blocks	Cat. No.		Pkg Qty.	Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Grey	1492-J2Q		100	1492-EAHJ35			50	1492-EAHJ35		50
	Red	1492-J2Q-RE		100	1492-J3TW-RE			100	—		—
	Blue	1492-J2Q-B		100	1492-J3TW-B			100	—		—
	Black	1492-J2Q-BL		100	1492-J3TW-BL			100	—		—
	Green	1492-J2Q-G		100	1492-J3TW-G			100	—		—
	Yellow	1492-J2Q-Y		100	1492-J3TW-Y			100	—		—
	Orange	1492-J2Q-OR		100	1492-J3TW-OR			100	—		—
	Brown	1492-J2Q-BR		100	1492-J3TW-BR			100	—		—
	White	1492-J2Q-W		100	1492-J3TW-W			100	—		—
Accessories		Cat. No.		Pkg Qty.	Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1			10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5			10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6			2	1492-DR6		100
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7			2	1492-DR7		100
End Barriers	Grey	1492-EBJ3		50	1492-EBJ3			50	1492-EBJ4TW		50
	Blue	1492-EBJ3-B		50	1492-EBJ3-B			50	—		—
	Yellow	1492-EBJ3-Y		50	1492-EBJ3-Y			50	1492-EBJ4TW-Y		50
End Anchors and Retainers: Screwless End Retainer		1492-ERL35		20	1492-ERL35			20	1492-ERL35		20
DIN Rail — Normal Duty		1492-EAJ35		100	1492-EAJ35			100	1492-EAJ35		20
DIN Rail — Heavy Duty		1492-EAHJ35		50	1492-EAHJ35			50	1492-EAHJ35		50
Jumpers:¬ Screw Center Jumper — 10-pole		1492-CJJ5-10		20	1492-CJJ5-10			20	—		—
Screw Center Jumper — 4-pole		1492-CJJ5-4		50	1492-CJJ5-4			50	—		—
Screw Center Jumper — 3-pole		1492-CJJ5-3		50	1492-CJJ5-3			50	—		—
Screw Center Jumper — 2-pole		1492-CJJ5-2		50	1492-CJJ5-2			50	—		—
Plug-in Center Jumper — 50-Pole (1492-J3TW)/ 41-Pole (1492-J4TW)		—		—	1492-CJLJ5-50			10	1492-CJLJ6-41		10
Plug-in Center Jumper — 5-, 6-, 7-, 8-, 9-, 10-Pole		—		—	1492-CJLJ5-5, -6, -7, -8, -9, -10			20	1492-CJLJ6-10		20
Plug-in Center Jumper — 2-, 3-, 4-Pole		—		—	1492-CJLJ5-2, -3, -4			60	1492-CJLJ6-2, -3, -4		60
Insulated Side Jumper — 24-Pole		1492-SJ5B-24		50	1492-SJ5B-24			50	—		—
Insulated Side Jumper — 10-Pole		1492-SJ5B-10		50	1492-SJ5B-10			50	—		—
Screw Type Jumper Notching Tool		1492-T1		1	1492-T1			1	—		—
Other Accessories: Partition Plate		1492-EBJ16		20	1492-EBJ16			20	—		—
Test Plug Socket		1492-TPS23L		50	1492-TPS23L			50	1492-TPS23L		50
Test Plug		1492-TP23		20	1492-TP23			20	1492-TP23		20
Test Plug (Stackable)		1492-TPJ5		25	1492-TPJ5			25	—		—
Marking Systems: Snap-in marker card		1492-M5X12 (144/card)		5	1492-M5X12 (144/card)			5	1492-MR6X12 (120/card)		5
		1492-M6X12 (200/card)		5	1492-M6X12 (200/card)			5	1492-M6X12 (120/card)		5

¬ Use of center jumpers may affect spacings, requiring derating of terminal blocks.

		1492-J4Q			1492-JD3C				1492-JD4C
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Single-level feed-through terminal block with 2 connection points on each side			Two-level feed-through terminal block with commoning bar				Two-level feed-through terminal block with commoning bar
Certifications			CSA	IEC		CSA	IEC	ATEX		CSA	IEC	ATEX
Voltage Rating		600V AC/DC		500V AC/DC	600V AC/DC	300V AC/DC	400V AC/DC	275V AC/DC	600V AC/DC	300V AC/DC	400V AC/DC	550V AC/DC
Maximum Current		30 A		32 A	20 A	10 A	24 A	21 A	35 A	30 A	32 A	28 A
Maximum Current (Single Side)		—			—				—
Maximum Current (Twin Side)		—			—				—
Wire Range (Rated Cross Section) (Single Side For J3TW)		#30…10 AWG		0.5…4 mm²	#22…12 AWG	#26…12 AWG	2.5 mm²	2.5 mm² (20… 14 AWG)	#26…10 AWG		0.5…4 mm²	4 mm²(20…12 AWG)
Wire Strip Length		0.39 in. (10 mm)			0.39 in. (10 mm)				0.28 in. (7 mm)
Recommended Tightening Torque		6.2 lb•in. (0.7 N•m)			4.5…7.1 lb•in. (0.5…0.8 N•m)				4.5 lb•in. (0.5 N•m)
Density		49 pcs/ft (163 pcs/m)			59 pcs/ft (196 pcs/m)				49 pcs/ft (163 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating (SCCR)		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.	Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.
Color:	Grey	1492-J4Q		50	1492-JD3C			100	1492-JD4C			100
Accessories		Cat. No.		Pkg Qty.	Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1			10	199-DR1			10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5			10	1492-DR5			10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6			2	1492-DR6			2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7			2	1492-DR7			2
End Barriers	Grey	1492-EBJ4Q		50	1492-EBJD3			20	1492-EBJD4			20
	Blue	—		—	1492-EBJD3-B			20	—			—
	Yellow	1492-EBJ4Q-Y		50	1492-EBJD3-Y			20	—			—
End Anchors and Retainers: Screwless End Retainer		1492-ERL35		20	1492-ERL35			20	—			—
DIN Rail — Normal Duty		1492-EAJ35		100	1492-EAJ35			100	—			—
DIN Rail — Heavy Duty		1492-EAHJ35		50	1492-EAHJ35			50	1492-EAHJ35			50
Jumpers:¬ Screw Center Jumper — 41-pole		—		—	—			—	—			—
Screw Center Jumper — 10-pole		—		—	1492-CJJ5-10			20	—			—
Screw Center Jumper — 4-pole		—		—	1492-CJJ5-4			50	—			—
Screw Center Jumper — 3-pole		—		—	1492-CJJ5-3			50	—			—
Screw Center Jumper — 2-pole		—		—	1492-CJJ5-2			50	—			—
Plug-in Center Jumper — 41-Pole		1492-CJLJ6-41		10	—			—	1492-CJLJ6-41			10
Plug-in Center Jumper — 5-, 6-, 7-, 8-, 9-, 10-Pole		1492-CJLJ6-10		20	—			—	1492-CJLJ6-10			20
Plug-in Center Jumper — 2-, 3-, 4-Pole		1492-CJLJ6-2, -3, -4		60	—			—	1492-CJLJ6-2, -3, -4			60
Insulated Side Jumper — 24-Pole		—		—	1492-SJ5A-24			50	—			—
Insulated Side Jumper — 10-Pole		—		—	1492-SJ5A-10			50	—			—
Screw Type Jumper Notching Tool		—		—	1492-T1			1	—			—
Other Accessories: Partition Plate		—		—	1492-PPJD3			20	1492-PPJD3			20
Test Plug Socket		—		—	1492-TPS23			20	—			—
Test Plug		—		—	1492-TP23			20	—			—
Test Plug (Stackable)		—		—	—			—	—			—
Marking Systems: Snap-in marker card		1492-MR6X12 (120/card)		5	1492-M5X8 (144/card)			5	1492-MR6X8 (120/card)			5
		1492-M6X12 (120/card)		5	1492-M5X5 (200/card)			5	1492-M6X5 (200/card)			5

¬ Use of center jumpers may affect spacings, requiring derating of terminal blocks; see Center Jumpers — Screw Type.

		1492-W4TW			1492-WR3			1492-J4M
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through terminal block with 3 connection points, 2 on one side			Single-circuit terminal block with terminals on common side.			Motor connection terminal block cluster with 3 feeds and ground
Certifications			CSA	IEC		CSA	IEC	Certifications on individual blocks (1492-J4, JG4)
Voltage Rating		600V AC/DC	600V AC/DC	800V AC/DC	300V AC/DC		500V AC/DC
Maximum Current		30 A	20 A	32 A	15 A		15 A
Wire Range (Rated Cross Section)		#18…10 AWG	#22…12 AWG	0.5…4 mm²	#22…14 AWG		0.5…2.5 mm²	#22…10 AWG 4 mm²
Wire Strip Length		0.35 in. (9 mm)			0.39 in. (10 mm)			0.39 in. (10 mm)
Recommended Tightening Torque		5.0…5.6 lb•in. (0.6 N•m)			5.0…5.6 lb•in. (0.6 N•m)			9.0 lb•in. (1.0 N•m)
Density		50 pcs/ft (166 pcs/m)			61 pcs/ft (200 pcs/m)			12 pcs/ft (40 pcs/m)
Housing Temperature Range		–40…+195 °F (–40…+90 °C)			–40…+195 °F (–40…+90 °C)			–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.	Pkg Qty.
Color:	Grey	1492-W4TW		50	1492-WR3		50	—	—
	Grey/Green/Yellow	—		—	—		—	1492-J4M	20
	Red	1492-W4TW-RE		50	—		—	—	—
	Blue	1492-W4TW-B		50	—		—	—	—
	Black	1492-W4TW-BL		50	—		—	—	—
	Green	1492-W4TW-G		50	—		—	—	—
	Yellow	1492-W4TW-Y		50	—		—	—	—
	Orange	1492-W4TW-OR		50	—		—	—	—
	Brown	1492-W4TW-BR		50	—		—	—	—
	White	1492-W4TW-W		50	—		—	—	—
Accessories		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.	Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1		10	199-DR1	10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5		10	1492-DR5	10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6		2	1492-DR6	2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7		2	1492-DR7	2
End Barriers	Grey	1492-EB3TW		50	1492-EBR3		50	Not Required	—
End Anchors and Retainers: Screwless End Retainer		1492-ERL35		20	1492-ERL35		20	1492-ERL35	20
DIN Rail — Normal Duty		1492-EAJ35		100	1492-EAJ35		100	1492-EAJ35	100
DIN Rail — Heavy Duty		1492-EAHJ35		50	1492-EAHJ35		50	1492-EAHJ35	50
Jumpers: Side Jumper — 10-pole insulated		1492-SJ6-10¬		10	1492-SJ5-10		10	—	—
Screw Center Jumper — 50-pole		1492-CJ6-50		5	1492-CJD5-50		5	—	—
Screw Center Jumper — 10-pole		1492-CJ6-10		10	1492-CJD5-10		10	1492-CJJ6-10	20
Screw Center Jumper — 5-pole		1492-CJ6-5		10	1492-CJD5-5		10	—	—
Screw Center Jumper — 4-pole		1492-CJ6-4		10	1492-CJD5-4		10	1492-CJJ6-4	50
Screw Center Jumper — 3-pole		1492-CJ6-3		10	1492-CJD5-3		10	1492-CJJ6-3	50
Screw Center Jumper — 2-pole		1492-CJ6-2		10	1492-CJD5-2		10	1492-CJJ6-2	50
Center Jumper Cover — White‡		1492-CJCW6		20	1492-CJCW5		20	—	—
Center Jumper Link		1492-CJL6		10	1492-CJL5		10	—	—
Screw Type Jumper Notching Tool		—		—	—		—	1492-T1	1
Other Accessories: Partition Plate		1492-PP10		50	1492-EBR3		50	1492-EBJ16	20
End CoverT		1492-EC3TW		10	—		—	—	—
Test Plug Socket		—		—	—		—	1492-TPS23L	50
Test Plug		1492-TP28		10	—		—	1492-TP23	20
Test Adapater		1492-TA40		10	1492-TA285		10	1492-TPJ6	25
Electrical Warming Plate		—		—	—		—	1492-EWPJ5	50
Marking Systems: Snap-in marker cards		1492-MS6X9 (80/card)		5	1492-MS5X9 (80/card)		5	1492-M6X12 (120/card)	5

¬ Use side jumpers on the single conductor side only.
T Provides IP2X Finger Safety when a W4 is mounted on open side of 1492-W4TW.
‡ May only be used as a marking surface. Cannot be installed over a center jumper.

		1492-J4CTB
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Single-level feed through block with circuit-break test/measurement plug capability
Certifications			CSA	IEC
Voltage Rating		300V AC/DC		500V AC/DC
Maximum Current		8 A		6 A
Wire Range (Rated Cross Section)		#26…10 AWG		0.5…4 mm²
Wire Strip Length		0.394 in. (10 mm)
Recommended Tightening Torque		4.4…7.1 lb•in. (0.5…0.8 N•m)
Density		49 pcs/ft (163 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.
Color:	Grey	1492-J4CTB		50
Accessories		Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2
End Barrier	Grey	1492-EBJ4CTB		50
End Anchors: Screwless End Retainer		1492-ERL35		20
DIN Rail - Normal Duty		1492-EAJ35		100
DIN Rail - Heavy Duty		1492-EAHJ35		50
Other Accessories: Partition Plate		—		—
Test Plug		—		—
Test Plug - Make Before Break		1492-TPCMB		25
Test Plug - Break Before Make		1492-TPCBM		25
Marking Systems: Snap-in marker cards		1492-MR6X8 (120/card)		5
Snap-in marker cards		1492-M6X5 (200/card)		5

¬ The Bulletin 1492-GMC marker carrier installs directly on the top of a 1492-EAJ35 end anchor or a 1492-ERL35 end retainer for group marking purposes.

Stab-Connect Feed-Through Blocks

		1492-J3F			1492-JD3F
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through terminal block with stab connections on one side			Two-level, two-circuit feed-through terminal block with stab connections on one side
Certifications			CSA	IEC		CSA	IEC
Voltage Rating		300V AC/DC		500V AC/DC	300V AC/DC		400V AC/DC
Maximum Current		16 A	10 A	16 A (2 x 8)	10 A		16 A (2 x 8)
Wire Range (Rated Cross Section)		#22…12 AWG	#26…12 AWG	2.5 mm²	#22…12 AWG	#26…12 AWG	2.5 mm²
Wire Strip Length		0.39 in. (10 mm)			0.39 in. (10 mm)
Recommended Tightening Torque		4.5…7.1 lb•in. (0.5…0.8 N•m)			4.5…7.1 lbvin. (0.5…0.8 N•m)
Density		59 pcs/ft (196 pcs/m)			59 pcs/ft (196 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Grey	1492-J3F		50	1492-JD3F		50
Accessories		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7		2
End Barrier		1492-EBJ3		50	1492-EBJD3		20
End Anchors and Retainers: Screwless End Retainer		1492-ERL35		20	1492-ERL35		20
DIN Rail — Normal Duty		1492-EAJ35		100	1492-EAJ35		100
DIN Rail — Heavy Duty		1492-EAHJ35		50	1492-EAHJ35		50
Fast-on Connector (Size 0.110 in.)		800M-NT2		100	800M-NT2		100
Connector Insulation Sleeve		1492-FCS		100	1492-FCS		100
Jumpers: Screw Center Jumper — 10-pole		1492-CJJ5-10		20	1492-CJJ5-10		20
Screw Center Jumper — 4-pole		1492-CJJ5-4		50	1492-CJJ5-4		50
Screw Center Jumper — 3-pole		1492-CJJ5-3		50	1492-CJJ5-3		50
Screw Center Jumper — 2-pole		1492-CJJ5-2		50	1492-CJJ5-2		50
Insulated Side Jumper — 24-Pole		1492-SJ5B-24		50	1492-SJ5A-24		50
Insulated Side Jumper — 10-Pole		1492-SJ5B-10		50	1492-SJ5A-10		50
Screw Type Jumper Notching Tool		1492-T1		1	1492-T1		1
Other Accessories: Partition Plate		1492-EBJ16		20	1492-PPJD3		20
Marking Systems: Snap-in marker cards		1492-M5X12 (144/card)		5	1492-M5X8 (144/card)		5
Snap-in marker cards		1492-M5X5 (200/card)		5	1492-M5X5 (200/card)		5

Sensor Blocks

		1492-WTF3…			1492-WTS3…
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Three-circuit terminal block.			Three-level sensor block.
Certifications			CSA	IEC		CSA	IEC
Voltage Rating		300V AC/DC		250V AC/DC	300V AC/DC		250V AC/DC
Maximum Current		10 A		24 A	10 A		24 A
Wire Range (Rated Cross Section)		#26…14 AWG		0.5…2.5mm²	#26…14 AWG		0.5…2.5 mm²
Recommended Tightening Torque		4.2…4.6 lb•in. (0.5 N•m)			4.2…4.6 lb•in. (0.5 N•m)
Density		60 pcs/ft (197 pcs/m)			60 pcs/ft (197 pcs/m)
Housing Temperature Range		–40…+195 °F (–40…+90 °C)			–40…+195 °F (–40…+90 °C)
Indicator Type WTF3/WTS3		No Indicator			No Indicator
WTF3LP/WTS3LP		Red LED for PNP devices (10…50V)			Red LED for PNP devices (10…50V)
WTF3LN/WTS3LN		Red LED for NPN devices (10…50V)			Red LED for NPN devices (10…50V)
Leakage Current WTF3/WTS3		—			—
WTF3LP/WTS3LP		2.69 mA @ 50V			2.69 mA @ 50V
WTF3LN/WTS3LN		2.69 mA @ 50V			2.69 mA @ 50V
Wire Strip Length		0.31 in. (8 mm)			0.31 in. (8 mm)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Grey	1492-WTF3		50	1492-WTS3		50
	Blue	—		—	1492-WTS3-B		50
Grey for PNP devices		1492-WTF3LP		50	1492-WTS3LP		50
Grey for NPN devices		1492-WTF3LN		50	1492-WTS3LN		50
Accessories		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7		2
End Barrier		1492-EBTF3		50	1492-EBTS3		50
End Anchors and Retainers: Screwless End Retainer		1492-ERL35		20	1492-ERL35		20
DIN Rail — Normal Duty		1492-EAJ35		100	1492-EAJ35		100
DIN Rail — Heavy Duty		1492-EAHJ35		50	1492-EAHJ35		50
Jumpers: Center Jumper — 50-pole		1492-CJT5-50		5	1492-CJT5-50		5
Center Jumper — 10-pole		1492-CJT5-10		10	1492-CJT5-10		10
Center Jumper — 3-pole		1492-CJT5-3		10	1492-CJT5-3		10
Center Jumper — 2-pole		1492-CJT5-2		10	1492-CJT5-2		10
Center Jumper Link		1492-CJL5		10	1492-CJL5		10
Center Jumper Cover — Red		1492-CJCR5		10	1492-CJCR5		10
Center Jumper Cover — Blue		1492-CJCB5		10	1492-CJCB5		10
Side — 20-pole Insulated Red		1492-SJT5-20-R		10	1492-SJT5-20-R		10
Side — 20-pole Insulated Blue		1492-SJT5-20-B		10	1492-SJT5-20-B		10
Other Accessories: Partition Plate		1492-PPTS3		50	1492-PPTS3		50
Test Plug Adapter		1492-TA285		10	1492-TA285		10
Electrical Warning Plate	4-Pole	1492-EWP5-4		10	1492-EWP5-4		10
	1-Pole	1492-EWP5		10	1492-EWP5		10
Marking Systems: Snap-in Marker Card		1492-MS5X9 (80/card)		5	1492-MS5X9 (80/card)		5

Grounding Blocks

1492-JG2Q

1492-JG3

1492-JG3TW

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Feed-through grounding terminal block with 2 connection points on each side

Feed-through grounding terminal block

Feed-through grounding terminal block with 3 connection points, 2 on one side

Certifications

CSA

IEC

CSA

IEC

ATEX

CSA

IEC

ATEX

Voltage Rating

—

Maximum Current

Grounding

Wire Range
(Rated Cross Section)

Single Side

#22…14 AWG

1.5 mm²

#22…12 AWG

2.5 mm²

2.5 mm²
(#20…14 AWG)

#22…12 AWG

2.5 mm²

2.5 mm² (#20…14 AWG)

Twin Side

—

#26…12 AWG

1.5 mm²

1.5 mm²(#20…16 AWG)

Wire Strip Length/Tightening Torque

0.28 in. (7 mm)

0.39 in. (10 mm)

Single Side: 0.39 in. (10 mm)/7.1 lb-in. (0.8 N•m)

Twin Side: 0.28 in. (7 mm)/4.5 lb-in. (0.5 N•m)

Recommended Tightening Torque

5.0 lb•in. (0.6 N•m)

7.1 lb•in. (0.8 N•m)

—

Mounting Torque — Center Screw

3.5…5.3 lb•in. (0.4…0.6 N•m)

3.5…6.2 lb•in. (0.4…0.6 N•m)

3.5…5.3 lb•in. (0.4…0.6 N•m)

Density

59 pcs/ft (196 pcs/m)

Housing Temperature Range

–58…+248 °F (–50…+120 °C)

Short-Circuit Current Rating

See Fuse Ratings

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Green/Yellow

1492-JG2Q

100

1492-JG3

100

1492-JG3TW

100

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

1 m Symmetrical DIN (Aluminum)

1492-DR5

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

End Barrier

Yellow

1492-EBJ3-Y

End Anchors and End Retainers:
Screwless End Retainer

1492-ERL35

DIN Rail — Normal Duty

1492-EAJ35

100

1492-EAJ35

100

1492-EAJ35

100

DIN Rail — Heavy Duty

1492-EAHJ35

Marking Systems:
Snap-in marker cards

1492-M5X12 (144/card)

Snap-in marker cards

1492-M5X5 (200/card)

		1492-JG4				1492-JG4TW			1492-JG4Q
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through grounding terminal block				Single-level grounding terminal block with 3 connection points, 2 on one side			Single-level grounding terminal block with two connection points on each sides
Certifications			CSA	IEC	ATEX		CSA	IEC		CSA	IEC
Voltage Rating		—	—	—	—	—			—
Maximum Current		Grounding				Grounding			Grounding
Wire Range (Rated Cross Section)		#22…10 AWG		4 mm²	4 mm² (#20…12 AWG)	#30…10 AWG		0.5…4 mm²	#30…10 AWG		0.5…4 mm²
Wire Strip Length		0.39 in. (10 mm)				0.394 in. (10 mm)			0.394 in. (10 mm)
Recommended Tightening Torque		9 lb-in. (1.0 N•m)				6.2 lb•in. (0.7 N•m)			6.2 lb•in. (0.7 N•m)
Mounting Torque - Center Screw		4.4…7.1 lb•in. (0.5…0.8 N•m)				—			—
Density		49 pcs/ft (163 pcs/m)				49 pcs/ft (163 pcs/m)			49 pcs/ft (163 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Green/Yellow	1492-JG4			100	1492-JG4TW		50	1492-JG4Q		50
Accessories		Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1			10	199-DR1		10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5			10	1492-DR5		10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6			2	1492-DR6		2	1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7			2	1492-DR7		2	1492-DR7		2
End Barrier	Yellow	Not Required			—	1492-EBJ4TW-Y		50	1492-EBJ4Q-Y		50
End Anchors: Screwless End Retainer		1492-ERL35			20	1492-ERL35		20	1492-ERL35		20
DIN Rail - Normal Duty		1492-EAJ35			100	1492-EAJ35		100	1492-EAJ35		100
DIN Rail - Heavy Duty		1492-EAHJ35			50	1492-EAHJ35		50	1492-EAHJ35		50
Marking Systems: Snap-in marker cards		1492-M6X12 (120/card)			5	1492-MR6X12 (120/card)		5	1492-MR6X12 (120/card)		5
Snap-in marker cards		1492-M6X5 (200/card)			5	1492-M6X12 (120/card)		5	1492-M6X12 (120/card)		5

		1492-JG6				1492-JG10
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through grounding terminal block				Feed-through grounding terminal block
Certifications			CSA	IEC	ATEX		CSA	IEC	ATEX
Voltage Rating		—	—	—	—	—	—	—	—
Maximum Current		Grounding				Grounding
Wire Range (Rated Cross Section)		#22…8 AWG		6 mm²	6 mm² (#20…10 AWG)	#16…6 AWG		10 mm²	10 mm² (#16…8 AWG)
Wire Strip Length		0.47 in. (12 mm)				0.47 in. (12 mm)
Recommended Tightening Torque		14.2 lb•in. (1.6 N•m)				20.4 lb•in. (2.3 N•m)
Mounting Torque — Center Screw		4.4…8.9 lb•in. (0.5…1.0 N•m)				4.4…8.9 lb•in. (0.5…1.0 N•m)
Density		37 pcs/ft (123 pcs/m)				30 pcs/ft (100 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.
Color:	Green/Yellow	1492-JG6			50	1492-JG10			50
Accessories		Cat. No.			Pkg Qty.	Cat. No.			Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1			10	199-DR1			10
1 m Symmetrical DIN (Aluminum)		1492-DR5			10	1492-DR5			10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6			2	1492-DR6			2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7			2	1492-DR7			2
End Anchors and End Retainers: Screwless End Retainer		1492-ERL35			20	1492-ERL35			20
DIN Rail — Normal Duty		1492-EAJ35			100	1492-EAJ35			100
DIN Rail — Heavy Duty		1492-EAHJ35			50	1492-EAHJ35			50
Marking Systems: Snap-in marker cards		1492-MR8X12 (84/card)			5	1492-M7X12 (108/card)			5
Snap-in marker cards		1492-M8X5 (160/card)			5	1492-M8X5 (160/card)			5

1492-JG16

1492-JG35

1492-JG50

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Feed-through grounding terminal block

Certifications

CSA

IEC

ATEX

CSA

IEC

ATEX

CSA

IEC

ATEX

Voltage Rating

—

Maximum Current

Grounding

Wire Range (Rated Cross Section)

#24…4 AWG

16 mm²

16 mm² (#16…6 AWG)

#12…1 AWG

#12…2 AWG

35 mm²

35 mm² (#14…2 AWG)

#10…1/0 AWG

#14…1/0 AWG

50 mm²

50 mm²(10…1/0 AWG)

Wire Strip Length

0.63 in. (16 mm)

0.70 in. (18 mm)

0.94 in. (24 mm)

Recommended Tightening Torque

35.0 lb•in. (4.0 N•m)

51.0 lb•in. (5.8 N•m)

31.5 lb•in. (3.6 N•m)

Mounting Torque — Center Screw

10.6…21.2 lb•in. (1.2…2.4 N•m)

17.7…35.4 lb•in. (2.0…4.0 N•m)

Density

25 pcs/ft (83 pcs/m)

19 pcs/ft (62 pcs/m)

16 pcs/ft (54 pcs/m)

Housing Temperature Range

–58…+248 °F (–50…+120 °C)

Short-Circuit Current Rating

See Fuse Ratings

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Green/Yellow

1492-JG16

1492-JG35

1492-JG50

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

—

1 m Symmetrical Heavy Duty DIN (Steel, Unslotted)

199-DR4

1 m Symmetrical DIN (Aluminum)

1492-DR5

—

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

—

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

—

1 m Symmetrical Heavy Duty DIN (Copper, Unslotted)

1492-DR8

1 m Symmetrical Heavy
Duty DIN (Steel)

1492-DR9

End Barrier

Not Required

—

Not Required

—

Not Required

—

End Anchors:
DIN Rail — Heavy Duty

1492-EAHJ35

Marking Systems:
Snap-in marker cards

1492-M7X12 (108/card)

Snap-in marker cards

1492-M8X5 (160/card)

		1492-JG70				1492-JG120			1492-JDG3
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through grounding terminal block				Feed-through grounding terminal block			Two-circuit terminal block with one feed-through and one grounding
Certifications			CSA	IEC	ATEX		CSA	IEC		CSA	IEC	ATEX
Voltage Rating		—				—			300V AC/DC		400V AC/DC	275V AC/DC
Maximum Current		Grounding				—			20 A		24 A	21 A
Wire Range (Rated Cross Section)		#6…2/0 AWG		70 mm²	70 mm² (#8…2/0 AWG)	#4…3/0 AWG	#4…4/0 AWG	16...95 mm²	#22…12 AWG		2.5 mm²	2.5 mm² (#20…14 AWG)
Wire Strip Length		0.87 in. (22 mm)				1.06 in. (27 mm)			0.39 in. (10 mm)
Recommended Tightening Torque		87.0 lb-in. (9.8 N•m)				88.5 lb•in. (10 N•m)			4.5…7.1 lb•in. (0.5…0.8 N•m)
Mounting Torque — Center Screw		17.7…35.4 lb•in. (2.0…4.0 N•m)				—			—
Density		14 pcs/ft (48 pcs/m)				11 pcs/ft (37 pcs/m)			59 pcs/ft (196 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)				–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.			Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.			Pkg Qty.
Color:	Green/Yellow	1492-JG70			10	1492-JG120		5	—			—
	Grey	—			—	—		—	1492-JDG3			100
Accessories		Cat. No.			Pkg Qty.	Cat. No.			Cat. No.			Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		—			—	—		—	199-DR1			10
1 m Symmetrical DIN (Aluminum)		—			—	—		—	1492-DR5			10
1 m Hi-Rise Sym. DIN (Aluminum)		—			—	—		—	1492-DR6			2
1 m Angled Hi-Rise Sym. DIN (Steel)		—			—	—		—	1492-DR7			2
Screw Type 1 m Symmetrical Heavy Duty DIN (Copper, Unslotted)		1492-DR8			5	1492-DR8		5	—			—
End Barrier	Grey	Not Required			—	—		—	1492-EBJD3			20
	Yellow	Not Required			—	—		—	1492-EBJD3-Y			20
Jumpers: Screw Center Jumper — 10-pole		—			—	—		—	1492-CJJ5-10			20
Screw Center Jumper — 4-pole		—			—	—		—	1492-CJJ5-4			50
Screw Center Jumper — 3-pole		—			—	—		—	1492-CJJ5-3			50
Screw Center Jumper — 2-pole		—			—	—		—	1492-CJJ5-2			50
Insulated Side Jumper — 24-Pole		—			—	—		—	1492-SJ5A-24			50
Insulated Side Jumper — 10-Pole		—			—	—		—	1492-SJ5A-10			50
End Anchors and Retainers: Screwless End Retainer		—			—	—		—	1492-ERL35			20
DIN Rail — Normal Duty		—			—	—		—	1492-EAJ35			100
DIN Rail — Heavy Duty		1492-EAHJ35			50	1492-EAHJ35		50	1492-EAHJ35			50
Marking Systems: Snap-in marker cards		1492-M7X12 (108/card)			5	1492-M8X12 (84/card)		5	1492-M8X12 (144/card)			5
Snap-in marker cards		1492-M8X5 (160/card)			5	1492-M7X12 (108/card)		5	1492-M7X12 (200/card)			5

1492-JDG3C

1492-JDG4

1492-JDG4C

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Two-level grounding terminal block with commoning bar

Two-circuit terminal block with one feed-through and one grounding

Two-level grounding terminal block with commoning bar

Certifications

CSA

IEC

ATEX

CSA

IEC

ATEX

CSA

IEC

ATEX

Voltage Rating

—

600V
AC/DC

300V
AC/DC

800V
AC/DC

550V
AC/DC

—

Maximum Current

Grounding

35 A

30 A

32 A

28 A

Grounding

Wire Range (Rated Cross Section)

#22…12 AWG

#26…12 AWG

2.5 mm²

2.5 mm² (#20…14 AWG)

#26…10 AWG

4 mm²

#26…10 AWG

4 mm²

Wire Strip Length

0.39 in. (10 mm)

0.31 in. (8 mm)

Recommended Tightening Torque

4.5…7.1 lb•in (0.5…0.8 N•m)

4.5…8.8 lb•in. (0.5…1.0 N•m)

Mounting Torque — Center Screw

—

Density

59 pcs/ft (196 pcs/m)

49 pcs/ft (163 pcs/m)

Housing Temperature Range

–58…+248 °F (–50…+120 °C)

Short-Circuit Current Rating

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Green/Yellow

1492-JDG3C

100

—

1492-JDG3C

100

Grey

—

1492-JDG3

100

—

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

1 m Symmetrical DIN (Aluminum)

1492-DR5

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

Screw Type 1 m Symmetrical Heavy
Duty DIN (Copper, Unslotted)

—

End Barrier

Grey

1492-EBJD3

Yellow

1492-EBJD3-Y

Jumpers:
Screw Center Jumper — 10-pole

—

1492-CJJ5-10

—

Screw Center Jumper — 4-pole

—

1492-CJJ5-4

—

Screw Center Jumper — 3-pole

—

1492-CJJ5-3

—

Screw Center Jumper — 2-pole

—

1492-CJJ5-2

—

Insulated Side Jumper — 24-Pole

—

1492-SJ5A-24

—

Insulated Side Jumper — 10-Pole

—

1492-SJ5A-10

—

End Anchors and Retainers:
Screwless End Retainer

1492-ERL35

DIN Rail — Normal Duty

1492-EAJ35

100

1492-EAJ35

100

1492-EAJ35

100

DIN Rail — Heavy Duty

1492-EAHJ35

Marking Systems:
Snap-in marker cards

1492-M5X8 (144/card)

Snap-in marker cards

1492-M5X5 (200/card)

1492-MP

Space-Saver Grounding Blocks

1492-WG4

1492-WG6

1492-WG10S

Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.

Specifications

Single-circuit grounding terminal block.

Certifications

IEC

CSA

ATEX

IEC

CSA

ATEX

CSA

IEC

Voltage Rating

—

Maximum Current

Grounding

Wire Range (Rated Cross Section)

#22…12 AWG

4 mm²

#22…12 AWG

4 mm²

#22…10 AWG

6 mm²

#22…10 AWG

6 mm²

#22…8 AWG

10 mm²

Wire Strip Length

0.43 in. (11 mm)

0.47 in. (12 mm)

0.43 in (11 mm)

Recommended Tightening Torque

5.6…6.8 lb•in. (0.7 N•m)

7.1 lb•in (0.8 N•m)

Density

50 pcs/ft (166 pcs/m)

43 pcs/ft (142 pcs/m)

38 pcs/ft (125 pcs/m)

Housing Temperature Range

–40…+195 °F (–40…+90 °C)

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Color:

Green/Yellow

1492-WG4

1492-WG6

1492-WG10S

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.

Mounting Rails:
1 m Symmetrical DIN (Steel)

199-DR1

1 m Symmetrical DIN (Aluminum)

1492-DR5

1 m Hi-Rise Sym. DIN (Aluminum)

1492-DR6

1 m Angled Hi-Rise Sym. DIN (Steel)

1492-DR7

End Barrier

1492-EB3-Y

1492-EB10-Y

End Anchors:
DIN Rail — Normal Duty

1492-EAJ35

100

1492-EAJ35

100

1492-EAJ35

100

DIN Rail — Heavy Duty

1492-EAHJ35

Marking Systems:
Snap-in Marker Card

1492-MS6X12 (80/card)

		1492-WG16S
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Single-circuit grounding terminal block.
Certifications			CSA	IEC
Voltage Rating		—	—	—
Maximum Current		Grounding
Wire Range (Rated Cross Section)		#14…4 AWG		2.5…16 mm²
Wire Strip Length		0.51 in. (13 mm)
Recommended Tightening Torque		18…20 lb•in. (2.1 N•m)
Center Screw Mounting Torque		10.6 lb•in. (1.2 N•m)
Density		27 pcs/ft (90 pcs/m)
Housing Temperature Range		–40…+195 °F (–40…+90 °C)
Terminal Blocks		Cat. No.		Pkg Qty.
Color:	Green/Yellow	1492-WG16S		25
Accessories		Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2
1 m Symmetrical DIN (Copper)		1492-DR8		5
1 m Symmetrical DIN (Steel)		1492-DR9		5
End Barrier		Not Required		—
End Anchors: DIN Rail — Normal Duty		1492-EAJ35		100
DIN Rail — Heavy Duty		1492-EAHJ35		50
Marking Systems: Snap-in Marker Card		1492-MS6X12 (80/card)		5

Isolation Blocks

		1492-JKD3			1492-JKD3TP			1492-JKD4
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed through terminal block with knife disconnect			Feed-through terminal block with knife disconnect and test screws			Feed-through terminal block with knife disconnect
Certifications			CSA	IEC		CSA	IEC		CSA	IEC
Voltage Rating		300V AC/DC		500V AC/DC	300V AC/DC		500V AC/DC	600V AC/DC	300V AC/DC	400V AC/DC
Maximum Current		10 A		24 A	10 A		24 A	22 A	10 A	32 A
Wire Range (Rated Cross Section)		#22…12 AWG		2.5 mm²	#22…12 AWG		2.5 mm²	#22…10 AWG		0.05…4.0 mm²
Fuse Size (Dummy Fuse Supplied)		—			—			—
Wire Strip Length		0.39 in. (10 mm)			0.39 in. (10 mm)			0.512 in. (13 mm)
Recommended Tightening Torque		7.1 lb•in. (0.8 N•m)			7.1 lb•in. (0.8 N•m)			9.0 lb•in. (1.0 N•m)
Density		49 pcs/ft (163 pcs/m)			49 pcs/ft (163 pcs/m)			49 pcs/ft (163 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Grey	1492-JKD3		100	1492-JKD3TP		100	1492-JKD4		100
	Blue	1492-JKD3-B		100	—		—	1492-JKD4-B		100
with Test Points	Grey	—		—	—		—	1492-JKD4TP		100
Accessories		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1		10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5		10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6		2	1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7		2	1492-DR7		2
End Barriers	Grey	1492-EBJ3		50	1492-EBJ3		50	1492-EBJ3		50
	Yellow	—		—	—		—	1492-EBJ3-Y		50
End Anchors: Screwless End Retainer		1492-ERL35		20	1492-ERL35		20	1492-ERL35		20
DIN Rail — Normal Duty		1492-EAJ35		100	1492-EAJ35		100	1492-EAJ35		100
DIN Rail — Heavy Duty		1492-EAHJ35		50	1492-EAHJ35		50	1492-EAHJ35		50
Jumpers: Plug-in Center Jumper — 50-Pole		1492-CJLJ5-50		10	1492-CJLJ5-50		10	—		—
Plug-in Center Jumper — 41-Pole		—		—	—		—	1492-CJLJ6-41		10
Plug-in Center Jumper — 10-Pole		1492-CJLJ5-10		20	1492-CJLJ5-10		20	1492-CJLJ6-10		20
Plug-in Center Jumper — 9-Pole		1492-CJLJ5-9		20	1492-CJLJ5-9		20	—		—
Plug-in Center Jumper — 8-Pole		1492-CJLJ5-8		20	1492-CJLJ5-8		20	—		—
Plug-in Center Jumper — 7-Pole		1492-CJLJ5-7		20	1492-CJLJ5-7		20	—		—
Plug-in Center Jumper — 6-Pole		1492-CJLJ5-6		20	1492-CJLJ5-6		20	—		—
Plug-in Center Jumper — 5-Pole		1492-CJLJ5-5		20	1492-CJLJ5-5		20	—		—
Plug-in Center Jumper — 4-Pole		1492-CJLJ5-4		60	1492-CJLJ5-4		60	1492-CJLJ6-4		60
Plug-in Center Jumper — 3-Pole		1492-CJLJ5-3		60	1492-CJLJ5-3		60	1492-CJLJ6-3		60
Plug-in Center Jumper — 2-Pole		1492-CJLJ5-2		60	1492-CJLJ5-2		60	1492-CJLJ6-2		60
Insulated Side Jumper — 24-Pole		1492-SJ5B-24		50	1492-SJ5B-24		50	—		—
Insulated Side Jumper — 10-Pole		1492-SJ5B-10		50	1492-SJ5B-10		50	—		—
Uninsulated Side Jumper — 10-Pole		—		—	—		—	—		—
Side Jumper — Insulating Sleeve		—		—	—		—	—		—
Screw Type Jumper Notching Tool		1492-T1		1	1492-T1		1	—		—
Other Accessories: Partition Plate		1492-EBJ16		20	1492-EBJ16		20	—		—
Test Plug		—		—	1492-TP23		20	—		—
Marking Systems: Snap-in marker cards		1492-M5X12 (144/card)		5	1492-M5X12 (144/card)		5	1492-MR6X12 (120/card)		5
Snap-in marker cards		1492-M5X5 (200/card)		5	1492-M5X5 (200/card)		5	1492-M6X12 (120/card)		5

		1492-JKD4TW			1492-JKD4Q			1492-H7
Dimensions are not intended to be used for manufacturing purposes. Note: Height dimension is measured from top of rail to top of terminal block.
Specifications		Feed-through terminal block with knife disconnect; 3 connection points, 2 on one side			Feed-through terminal block with knife disconnect; 2 connection points, one on each side			Handle-style isolating terminal block
Certifications			CSA	IEC		CSA	IEC		CSA	IEC
Voltage Rating		600V AC/DC		500V AC/DC	600V AC/DC		500V AC/DC	300V AC/DC	300V AC/DC	500V AC/DC
Maximum Current		25 A		30 A	25 A		30 A	15 A	15 A	15 A
Wire Range (Rated Cross Section)		#30…10 AWG		0.5…4 mm²	#30…10 AWG		0.5…4 mm²	#30…10 AWG		0.05…4.0 mm²
Fuse Size (Dummy Fuse Supplied)		—			—			1/4 x 1-1/4 in.
Wire Strip Length		0.39 in. (10 mm)			0.39 in. (10 mm)			0.38 in. (9.7 mm)
Recommended Tightening Torque		6.2 lb•in. (0.7 N•m)			6.2 lb•in. (0.7 N•m)			7.1 lb•in. (0.8 N•m)
Density		49 pcs/ft (163 pcs/m)			49 pcs/ft (163 pcs/m)			33 pcs/ft (109 pcs/m)
Housing Temperature Range		–58…+248 °F (–50…+120 °C)			–58…+248 °F (–50…+120 °C)			–40…+221 °F (–40…+105 °C)
Short-Circuit Current Rating		See Fuse Ratings
Terminal Blocks		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Color:	Grey	1492-JKD4TW		50	1492-JKD4Q		50	—		—
With Test Points	Gray	1492-JKD4TWTP		50	1492-JKD4QTP		50	—		—
	Black	—		—	—		—	1492-H7		25
Accessories		Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.	Cat. No.		Pkg Qty.
Mounting Rails: 3 ft Scored A-B Rail		—		—	—		—	1492-N1		20
3 ft Rigid A-B Rail		—		—	—		—	1492-N22		20
3 ft Rigid Rise A-B Rail		—		—	—		—	1492-N44		2
Standoff Brackets (use every 12 in.) T		—		—	—		—	1492-N25		2
1 m Symmetrical DIN (Steel)		199-DR1		10	199-DR1		10	199-DR1		10
1 m Symmetrical DIN (Aluminum)		1492-DR5		10	1492-DR5		10	1492-DR5		10
1 m Hi-Rise Sym. DIN (Aluminum)		1492-DR6		2	1492-DR6		2	1492-DR6		2
1 m Angled Hi-Rise Sym. DIN (Steel)		1492-DR7		2	1492-DR7		2	1492-DR7		2
End Barrier	Grey	1492-EBJ4TW		50	1492-EBJ4Q		50	1492-N37		50
	Yellow	1492-EBJ4TW-Y		50	1492-EBJ4Q-Y		50	—		—
End Anchors and Retainers: A-B Rail — Heavy Duty		—		—	—		—	1492-N23		10
A-B Rail — Normal Duty		—		—	—		—	1492-N47		50
Screwless End Retainer		1492-ERL35		20	1492-ERL35		20	1492-ERL35		20
DIN Rail - Normal Duty		1492-EAHJ35		50	1492-EAHJ35		50	1492-EAHJ35		50
DIN Rail - Heavy Duty		1492-EAHJ35		50	1492-EAHJ35		50	1492