Terminal Blocks, IEC

Catalogs > Industrial Controls Catalog > Terminal Blocks and Wiring Systems > Terminal Blocks, IEC > Screw Connection Terminal Blocks

Screw Connection Terminal Blocks

Introduction Mini-Blocks Standard Feed-Through Blocks Space-Saver Feed-Through Blocks Multi-Circuit Feed-Through Blocks Specialty Feed-Through Blocks Stab-Connect Feed-Through Blocks
Sensor Blocks Grounding Blocks Space-Saver Grounding Blocks Isolation Blocks Plug-in Style Terminal Blocks Double Level Plug-in Style Blocks with Ground Internal Component Blocks
Thermocouple Blocks Neutral Disconnect and Installation Blocks Single-Circuit Neutral Disconnect Blocks Fuse Blocks Plug-in Connection Blocks Short-Circuit Current Ratings
Mini-Blocks

  1492-WM3 1492-WM4 1492-WMD1
Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.
Click to enlarge - 1492-WM3 Click to enlarge - 1492-WM4 Click to enlarge - 1492-WMD1
Specifications Single-circuit mini terminal block. Single-circuit mini terminal block. Two-circuit mini terminal block.
Certifications Click to enlarge - UR Logo IEC CSA ATEX Click to enlarge - UR Logo IEC CSA ATEX Click to enlarge - UR Logo CSA IEC
Voltage Rating 300V AC/DC 500V AC/DC 300V AC/DC 420V AC/DC 300V AC/DC 500V AC/DC 300V AC/DC 420V AC/DC 300V AC/DC 300V AC/DC 500V AC/DC
Maximum Current 15 A 24 A 15 A 24 A 20 A 32 A 20 A 32 A 15 A 15 A 17.5 A
Wire Range (Rated Cross Section) #30…14 AWG 0.5…2.5 mm2 #22…14 AWG 2.5 mm2 #22…12 AWG 0.5…4.0 mm2 #22…12 AWG 4.0 mm2 #22…16 AWG 0.5…1.5 mm2
Wire Strip Length 0.24 in. (6 mm) 0.39 in. (10 mm) 0.35 in (9 mm)
Recommended Tightening Torque 4.2…4.6 lb•in. (0.5 N•m) 5.0…5.6 lb•in. (0.6 N•m) 4.2…4.6 lb•in (0.5 N•m)
Density 61 pcs/ft (200/m) 50 pcs/ft (166/m) 61 pcs/ft (200/m)
Housing Temperature Range –40…+195 °F (–40…+90 °C) –40…+195 °F (–40…+90 °C) –40…+195 °F (–40…+90 °C)

Terminal Blocks

Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Cat. No.

Pkg Qty.
Color: Grey 1492-WM3 50 1492-WM4 50 1492-WMD1 50
  Red 1492-WM3-RE 50 1492-WM4-RE 50 1492-WMD1-RE 50
  Blue 1492-WM3-B 50 1492-WM4-B 50 1492-WMD1-B 50
  Black 1492-WM3-BL 50 1492-WM4-BL 50 1492-WMD1-BL 50
  Green 1492-WM3-G 50 1492-WM4-G 50 1492-WMD1-G 50
  Yellow 1492-WM3-Y 50 1492-WM4-Y 50 1492-WMD1-Y 50
  Orange 1492-WM3-OR 50 1492-WM4-OR 50 1492-WMD1-OR 50
  Brown 1492-WM3-BR 50 1492-WM4-BR 50 1492-WMD1-BR 50
  White 1492-WM3-W 50 1492-WM4-W 50 1492-WMD1-W 50

Accessories

Cat. No.
Pkg Qty.
Cat. No.
Pkg Qty.
Cat. No.

Pkg Qty.
Mounting Rails:
    1 m Sym. mini DIN (Steel)
1492-DR3 5 1492-DR3 5 1492-DR3 5
End Barrier 1492-EBM3 50 1492-EBM4 50 1492-EBMD1 50
End Anchors and Retainers:
    Mini Screwless End Retainer
1492-ERL15 20 1492-ERL15 20 1492-ERL15 20
Mini DIN Anchor — Normal Duty 1492-EAJ15 50 1492-EAJ15 50 1492-EAJ15 50
Jumpers:
    Insulated Side Jumper
1492-SJM5-10 (10-pole) 10 1492-N42 (2-pole) 50
1492-SJ6-10 (10-pole) 10
    Side Jumper — 12-pole uninsulated 1492-SJMD5-12 (Uninsulated) 10
    Center Jumper — 50-pole 1492-CJD6-50 5
    Center Jumper — 10-pole 1492-CJM5-10 10 1492-CJD6-10 10
    Center Jumper — 5-pole 1492-CJD6-5 10
    Center Jumper — 4-pole 1492-CJD6-4 10
    Center Jumper — 3-pole 1492-CJM5-3 10 1492-CJD6-3 10
    Center Jumper — 2-pole 1492-CJM5-2 10 1492-CJD6-2 10
    Center Jumper Link 1492-CJL5 10 1492-CJL6 10
Other Accessories:
    Partition Plate
1492-PPM3 50 1492-PPM3 50 1492-PPMD1 50
    Test Plug 1492-TP28 10
    Test Plug Adapter 1492-TA285 10 1492-TA40 10
    Electrical Warning Plate (4-pole) 1492-EWP6-4 10
Marking Systems:
    Snap-in Marker Card
1492-MS5X5 (80/card) 5 1492-MS6X9 (80/card) 5 1492-MS5X5 (80/card) 5
    
¬ Cat. no. is incomplete. See page System Requirements.

  1492-WMG3 1492-WMG4
Dimensions are not intended to be used for manufacturing purposes.
Note: Height dimension is measured from top of rail to top of terminal block.
Click to enlarge - 1492-WMG3 Click to enlarge - 1492-WMG4
Specifications Single-circuit mini grounding terminal block. Single-circuit mini grounding terminal block.
Certifications IEC Click to enlarge - UR Logo Click to enlarge - cRU_2008 IEC
Maximum Current Grounding Grounding
Wire Range (Rated Cross Section) #14 AWG (2.5 mm2) #22…12 AWG 0.5…4.0 mm2
Wire Strip Length 0.31 in. (8 mm) 0.39 in. (10 mm)
Recommended Tightening Torque 6.2 lb•in. (0.7 N•m) 5.3 lb•in. (0.6 N•m)
Density 50 pcs/ft (166 pcs/m) 50 pcs/ft (166 pcs/m)
Housing Temperature Range –40…+195 °F (–40…+90 °C)

Terminal Blocks

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.
Color: Metallic 1492-WMG3 50
Green/Yellow 1492-WMG4 10

Accessories

Cat. No.

Pkg Qty.

Cat. No.

Pkg Qty.
Mounting Rails:
    1 m Sym. Mini DIN (Steel)
1492-DR3 5 1492-DR3 5
End Anchors and Retainers:
    Mini Screwless End Retainer
1492-ERL15 20
    Mini DIN Anchor — Normal Duty 1492-EAJ15 50
Other Accessories:
    Partition Plate
1492-PPM3 50 1492-PPM3 50
Marking Systems:
    Snap-in Marker Card
1492-MS6X9 (80/card) 5
  
¬ Cat. no. is incomplete. See page System Requirements.